| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250724094912.253723-3-e@freeshell.de>
Date: Thu, 24 Jul 2025 02:48:45 -0700
From: E Shattow <e@...eshell.de>
To: Conor Dooley <conor@...nel.org>,
Emil Renner Berthing <kernel@...il.dk>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Alexandre Ghiti <alex@...ti.fr>
Cc: devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
E Shattow <e@...eshell.de>,
E Shattow <e@...enode.de>,
linux-riscv@...ts.infradead.org
Subject: [PATCH v1 2/4] riscv: dts: starfive: add Milk-V Mars CM system-on-module
Milk-V Mars CM is a System-on-Module based on the StarFive VisionFive 2
board and Radxa CM3 System-on-Module compatible with the Raspberry Pi
CM4IO Classic IO Board.
Mars CM SoM features:
- StarFive JH7110 System on Chip with RV64GC up to 1.5GHz
- AXP15060 Power Management Unit
- LPDDR4 2GB / 4GB / 8GB DRAM memory
- BL24C04F 4K bits (512 x 8) EEPROM
- GigaDevice 25LQ128EWIG QSPI NOR Flash 16M or SoC ROM UART loader for
boot (selectable by GPIO)
- eMMC5.0 8GB / 16GB / 32GB flash storage onboard
- AP6256 via SDIO 2.0 onboard wireless connectivity WiFi 5 + Bluetooth
5.2 (optional, present in models with WiFi feature)
- 1x Motorcomm YT8531C Gigabit Ethernet PHY
- IMG BXE-4-32 Integrated GPU with 3D Acceleration:
- H.264 & H.265 4K@...ps Decoding
- H.265 1080p@...ps Encoding
- JPEG encoder / decoder
Additional features available via 2x 100-pin connectors for CM4IO Board:
- 1x HDMI 2.0
- 1x MIPI DSI (4-lanes)
- 1x 2CH Audio out (via GPIO)
- 1x MIPI CSI (2x2-lanes or 1x4-lanes)
- 1x USB 2.0
- 1x PCIe 1-lane Host, Gen 2 (5Gbps)
- Up to 28x GPIO, supporting 3.3V
- UART x6
- PWM x8
- I2C x7
- SPI
- I2S
Link to Milk-V Mars CM schematics: https://github.com/milkv-mars/mars-files/tree/main/Mars-CM_Hardware_Schematices
Link to StarFive JH7110 Technical Reference Manual: https://doc-en.rvspace.org/JH7110/TRM/index.html
Link to Raspberry Pi CM4IO datasheet: https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf
Add the devicetree file to make use of StarFive JH7110 common supported
features PMIC, EEPROM, UART, I2C, GPIO, eMMC, PCIe, PWM DAC, QSPI Flash,
PWM, and Ethernet. Also configure the common SD Card interface mmc1 for
onboard SDIO BT+WiFi.
Signed-off-by: E Shattow <e@...enode.de>
---
arch/riscv/boot/dts/starfive/Makefile | 1 +
.../dts/starfive/jh7110-milkv-marscm-emmc.dts | 163 ++++++++++++++++++
2 files changed, 164 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index b3bb12f78e7d..79742617ddab 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-deepcomputing-fml13v01.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
new file mode 100644
index 000000000000..59766cdb912b
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@...eshell.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "jh7110-common.dtsi"
+
+/ {
+ model = "Milk-V Mars CM";
+ compatible = "milkv,marscm-emmc", "starfive,jh7110";
+
+ aliases {
+ i2c1 = &i2c1;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ serial3 = &uart3;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&sysgpio 33 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gmac0 {
+ assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+ assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+ starfive,tx-use-rgmii-clk;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c6 {
+ status = "disabled";
+};
+
+&mmc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ status = "okay";
+
+ ap6256: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&sysgpio>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ pinctrl-names = "default";
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&phy0 {
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
+ motorcomm,tx-clk-10-inverted;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,tx-clk-1000-inverted;
+ motorcomm,tx-clk-adj-enabled;
+};
+
+&pwm {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&sysgpio {
+ uart1_pins: uart1-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(16, GPOUT_SYS_UART1_TX,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(17, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART1_RX)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ cts-pins {
+ pinmux = <GPIOMUX(3, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART1_CTS)>;
+ bias-disable;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ rts-pins {
+ pinmux = <GPIOMUX(2, GPOUT_SYS_UART1_RTS,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ };
+
+ usb0_pins: usb0-0 {
+ vbus-pins {
+ pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ wake-pins {
+ pinmux = <GPIOMUX(34, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_NONE)>;
+ input-enable;
+ };
+ };
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ status = "okay";
+};
--
2.50.0
Powered by blists - more mailing lists