[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAK00qKCovgpgYZVNQhJZ9=5BBVH4ngGnD6MYwfxrzDuOe0f1Ww@mail.gmail.com>
Date: Mon, 28 Jul 2025 21:50:29 +0800
From: Victor Shih <victorshihgli@...il.com>
To: Adrian Hunter <adrian.hunter@...el.com>
Cc: ulf.hansson@...aro.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, benchuanggli@...il.com,
ben.chuang@...esyslogic.com.tw, HL.Liu@...esyslogic.com.tw,
Victor Shih <victor.shih@...esyslogic.com.tw>, stable@...r.kernel.org
Subject: Re: [PATCH V2 2/2] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer
timeout of AER
On Mon, Jul 28, 2025 at 2:56 PM Adrian Hunter <adrian.hunter@...el.com> wrote:
>
> On 25/07/2025 13:52, Victor Shih wrote:
> > From: Victor Shih <victor.shih@...esyslogic.com.tw>
> >
> > Due to a flaw in the hardware design, the GL9763e replay timer frequently
> > times out when ASPM is enabled. As a result, the warning messages will
> > often appear in the system log when the system accesses the GL9763e
> > PCI config. Therefore, the replay timer timeout must be masked.
> >
> > Also rename the gli_set_gl9763e() to gl9763e_hw_setting() for consistency.
>
> Should be a separate patch
>
Hi, Adrian
I will split it into two patches in the next version.
Thanks, Victor Shih
> >
> > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
>
> It is preferred to have a fixes tag as well. What about
>
> Fixes: 1ae1d2d6e555e ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
>
Hi, Adrian
I will add this fixes tag in the next version.
Thanks, Victor Shih
> > Cc: stable@...r.kernel.org
> > ---
> > drivers/mmc/host/sdhci-pci-gli.c | 7 +++++--
> > 1 file changed, 5 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index 98ee3191b02f..7165dde9b6b8 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -1753,7 +1753,7 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot)
> > return ret;
> > }
> >
> > -static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> > +static void gl9763e_hw_setting(struct sdhci_pci_slot *slot)
> > {
> > struct pci_dev *pdev = slot->chip->pdev;
> > u32 value;
> > @@ -1782,6 +1782,9 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
> > value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
> > pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
> >
> > + /* mask the replay timer timeout of AER */
> > + sdhci_gli_mask_replay_timer_timeout(pdev);
> > +
> > pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
> > value &= ~GLI_9763E_VHS_REV;
> > value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> > @@ -1925,7 +1928,7 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
> > gli_pcie_enable_msi(slot);
> > host->mmc_host_ops.hs400_enhanced_strobe =
> > gl9763e_hs400_enhanced_strobe;
> > - gli_set_gl9763e(slot);
> > + gl9763e_hw_setting(slot);
> > sdhci_enable_v4_mode(host);
> >
> > return 0;
>
Powered by blists - more mailing lists