linux-kernel - [PATCH v3 8/9] arm64: dts: imx943-evk: Add display support using IT6263

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250806150521.2174797-9-laurentiu.palcu@oss.nxp.com>
Date: Wed,  6 Aug 2025 18:05:15 +0300
From: Laurentiu Palcu <laurentiu.palcu@....nxp.com>
To: imx@...ts.linux.dev,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>
Cc: Frank Li <frank.li@....com>,
	Laurentiu Palcu <laurentiu.palcu@....nxp.com>,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v3 8/9] arm64: dts: imx943-evk: Add display support using IT6263

The ITE IT6263 based NXP LVDS to HDMI converter can be attached to the
i.MX943 EVK board LVDS port using the mini-SAS connector. Since this is
the default configuration for the EVK, add support for it here.

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@....nxp.com>
---
 arch/arm64/boot/dts/freescale/imx943-evk.dts | 121 +++++++++++++++++++
 1 file changed, 121 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
index c8c3eff9df1a2..5900ff355abc2 100644
--- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -34,6 +34,18 @@ dmic: dmic {
 		#sound-dai-cells = <0>;
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&it6263_out>;
+			};
+		};
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		off-on-delay-us = <12000>;
@@ -127,6 +139,115 @@ memory@...00000 {
 	};
 };
 
+&dcif {
+	status = "okay";
+};
+
+&ldb {
+	assigned-clocks = <&scmi_clk IMX94_CLK_LDBPLL_VCO>,
+			  <&scmi_clk IMX94_CLK_LDBPLL>;
+	assigned-clock-rates = <4158000000>, <1039500000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds_out: endpoint {
+				remote-endpoint = <&it6263_in>;
+			};
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9548_i2c3: i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lvds-to-hdmi-bridge@4c {
+				compatible = "ite,it6263";
+				reg = <0x4c>;
+				data-mapping = "jeida-24";
+				reset-gpios = <&pcal6416_i2c3_u171 8 GPIO_ACTIVE_HIGH>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						it6263_in: endpoint {
+							remote-endpoint = <&lvds_out>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						it6263_out: endpoint {
+							remote-endpoint = <&hdmi_connector_in>;
+						};
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
 &lpi2c3 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&pinctrl_lpi2c3>;
-- 
2.49.0