[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <15182C5FA04DB0A2+e2dbbd1f-24d6-4d9a-a822-222a71cc6dd8@radxa.com>
Date: Thu, 7 Aug 2025 20:47:11 +0900
From: FUKAUMI Naoki <naoki@...xa.com>
To: Joseph Kogut <joseph.kogut@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
Jimmy Hon <honyuenkwun@...il.com>
Cc: Steve deRosier <derosier@...-sierra.com>, devicetree@...r.kernel.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 2/3] arm64: dts: rockchip: Add rk3588 based Radxa CM5
Hi Joseph,
First of all, thank you very much for your hard work!
On 6/18/25 07:12, Joseph Kogut wrote:
> Add initial support for the Radxa Compute Module 5 (CM5). The CM5 uses a
> proprietary connector.
>
> Specification:
> - Rockchip RK3588
> - Up to 32 GB LPDDR4X
> - Up to 128 GB eMMC
> - 1x HDMI TX up to 8k@60 hz
> - 1x eDP TX up to 4k@60 hz
> - Gigabit Ethernet PHY
>
> Signed-off-by: Joseph Kogut <joseph.kogut@...il.com>
> ---
> .../arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi | 135 +++++++++++++++++++++
> 1 file changed, 135 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..6410ea5255dc783e5d24677853ccf1c78008e834
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2025 Joseph Kogut <joseph.kogut@...il.com>
> + */
> +
> +/*
> + * CM5 data sheet
> + * https://dl.radxa.com/cm5/v2210/radxa_cm5_v2210_schematic.pdf
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include <dt-bindings/usb/pd.h>
> +
> +/ {
> + compatible = "radxa,cm5", "rockchip,rk3588s";
> +
> + aliases {
> + mmc0 = &sdhci;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_sys: led-0 {
> + color = <LED_COLOR_ID_BLUE>;
> + default-state = "on";
> + function = LED_FUNCTION_HEARTBEAT;
> + gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> + cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> + cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu_s0>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0m2_xfer>;
> + status = "okay";
> +
> + vdd_cpu_big0_s0: regulator@42 {
> + compatible = "rockchip,rk8602";
> + reg = <0x42>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_big0_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-ramp-delay = <2300>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_big1_s0: regulator@43 {
> + compatible = "rockchip,rk8602";
> + reg = <0x43>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_big1_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-ramp-delay = <2300>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&mdio1 {
> + rgmii_phy1: phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1>;
> + };
> +};
> +
> +&pd_gpu {
> + domain-supply = <&vdd_gpu_s0>;
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + no-sdio;
> + no-sd;
> + non-removable;
> + max-frequency = <200000000>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + mmc-hs200-1_8v;
> + status = "okay";
> +};
> +
Please remove the last blank line.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
Powered by blists - more mailing lists