linux-kernel - Re: (subset) [PATCH v2 1/1] arm64: dts: qcom: qcs615: Set LDO12A regulator to HPM to avoid boot hang

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <175495482442.157244.678684703517788074.b4-ty@kernel.org>
Date: Mon, 11 Aug 2025 18:27:08 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: konradybcio@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	jingoohan1@...il.com,
	mani@...nel.org,
	lpieralisi@...nel.org,
	kwilczynski@...nel.org,
	bhelgaas@...gle.com,
	johan+linaro@...nel.org,
	vkoul@...nel.org,
	kishon@...nel.org,
	neil.armstrong@...aro.org,
	abel.vesa@...aro.org,
	Ziyue Zhang <quic_ziyuzhan@...cinc.com>
Cc: linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-pci@...r.kernel.org,
	linux-phy@...ts.infradead.org,
	qiang.yu@....qualcomm.com,
	quic_krichai@...cinc.com,
	quic_vbadigan@...cinc.com,
	Ziyue Zhang <ziyue.zhang@....qualcomm.com>,
	Tingguo Cheng <quic_tingguoc@...cinc.com>
Subject: Re: (subset) [PATCH v2 1/1] arm64: dts: qcom: qcs615: Set LDO12A regulator to HPM to avoid boot hang


On Thu, 17 Jul 2025 15:27:46 +0800, Ziyue Zhang wrote:
> On certain platforms (e.g., QCS615), consumers of LDO12A—such as PCIe,
> UFS, and eMMC—may draw more than 10mA of current during boot. This can
> exceed the regulator's limit in Low Power Mode (LPM), triggering current
> limit protection and causing the system to hang.
> 
> To address this, there are two possible approaches:
> a) Set the regulator's initial mode to High Performance Mode (HPM) in
>    the device tree.
> b) Keep the default LPM setting and have each consumer driver explicitly
>    set its current load.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: qcs615: Set LDO12A regulator to HPM to avoid boot hang
      commit: fba47ba8c8a8ffa9d8ad1836396837a998bb5153

Best regards,
-- 
Bjorn Andersson <andersson@...nel.org>