linux-kernel - Re: [PATCH 3/3] dts: describe x1e80100 ufs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <bc001360-1cfe-4886-a023-367a8edc21c5@quicinc.com>
Date: Thu, 14 Aug 2025 12:50:17 +0530
From: Nitin Rawat <quic_nitirawa@...cinc.com>
To: Harrison Vanderbyl <harrison.vanderbyl@...il.com>, <marcus@...gul.ch>,
        <kirill@...ins.ky>, <vkoul@...nel.org>, <kishon@...nel.org>,
        <robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
        <mani@...nel.org>, <alim.akhtar@...sung.com>, <avri.altman@....com>,
        <bvanassche@....org>, <andersson@...nel.org>, <agross@...nel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-scsi@...r.kernel.org>
Subject: Re: [PATCH 3/3] dts: describe x1e80100 ufs



On 8/14/2025 6:29 AM, Harrison Vanderbyl wrote:
> Describe device tree entry for x1e80100 ufs device
> Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@...il.com>
> ---
>   arch/arm64/boot/dts/qcom/x1e80100.dtsi | 91 ++++++++++++++++++++++++++
>   1 file changed, 91 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index a9a7bb676c6f..effa776e3dd0 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -2819,6 +2819,97 @@ tsens3: thermal-sensor@...4000 {
>   			#thermal-sensor-cells = <1>;
>   		};
>   
> +
> +		ufs_mem_hc: ufs@...4000 {
> +			compatible = "qcom,x1e80100-ufshc",
> +			"qcom,ufshc", "jedec,ufs-2.0";
> +			reg = <0 0x01d84000 0 0x3000>;
> +			
> +			
> +			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			phys = <&ufs_mem_phy>;
> +			phy-names = "ufsphy";
> +
> +			lanes-per-direction = <2>;
> +
> +			#reset-cells = <1>;
> +			resets = <&gcc GCC_UFS_PHY_BCR>;
> +
> +			reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
> +			reset-names = "rst";
> +
> +			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> +
> +			iommus = <&apps_smmu 0x1a0 0x0>;
> +
> +			clock-names = "core_clk",
> +				      "bus_aggr_clk",
> +				      "iface_clk",
> +				      "core_clk_unipro",
> +				      "ref_clk",
> +				      "tx_lane0_sync_clk",
> +				      "rx_lane0_sync_clk",
> +				      "rx_lane1_sync_clk";
> +
> +			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> +				 <&gcc GCC_UFS_PHY_AHB_CLK>,
> +				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> +				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> +
> +			freq-table-hz = <100000000 403000000>,
> +					<0 0>,
> +					<0 0>,
> +					<100000000 403000000>,
> +					<100000000 403000000>,
> +					<0 0>,
> +					<0 0>,
> +					<0 0>;
> +
Please use OPP table instead of freq-table-hz.


> +			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;

For Config Path, use QCOM_ICC_TAG_ACTIVE_ONLY.

YOu can refer to ICC discussion link for SM8750 - 
https://lore.kernel.org/linux-devicetree/354f8710-a5ec-47b5-bcfa-bff75ac3ca71@oss.qualcomm.com/ 




> +			interconnect-names = "ufs-ddr", "cpu-ufs";
> +
> +			qcom,ice = <&ice>;
> +
> +			status = "disabled";
> +		};
> +
> +		ufs_mem_phy: phy@...0000 {
> +			compatible = "qcom,x1e80100-qmp-ufs-phy";
> +			reg = <0 0x01d80000 0 0x2000>;
> +
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +
> +			clock-names = "ref",
> +				      "ref_aux",
> +				      "qref";
> +
> +			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
> +
> +			resets = <&ufs_mem_hc 0>;
> +			reset-names = "ufsphy";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		ice: crypto@...0000 {
> +			compatible = "qcom,x1e80100-inline-crypto-engine",
> +				     "qcom,inline-crypto-engine";
> +			reg = <0 0x1d88000 0 0x8000>;
> +
> +			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> +		};
> +
>   		usb_1_ss0_hsphy: phy@...000 {
>   			compatible = "qcom,x1e80100-snps-eusb2-phy",
>   				     "qcom,sm8550-snps-eusb2-phy";