linux-kernel - [PATCH 3/5] iio: mcp9600: Recognize chip id for mcp9601

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250815164627.22002-4-bcollins@watter.com>
Date: Fri, 15 Aug 2025 16:46:05 +0000
From: Ben Collins <bcollins@...ter.com>
To: Jonathan Cameron <jic23@...nel.org>,
	David Lechner <dlechner@...libre.com>,
	Nuno Sá <nuno.sa@...log.com>,
	Andy Shevchenko <andy@...nel.org>
Cc: Ben Collins <bcollins@...ter.com>,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 3/5] iio: mcp9600: Recognize chip id for mcp9601

The current driver works with mcp9601, but emits a warning because it
does not recognize the chip id.

MCP9601 is a superset of MCP9600. The drivers works without changes
on this chipset.

However, the 9601 chip supports open/closed-circuit detection if wired
properly, so we'll need to be able to differentiate between them.

Signed-off-by: Ben Collins <bcollins@...ter.com>
---
 drivers/iio/temperature/Kconfig   |  8 +++--
 drivers/iio/temperature/mcp9600.c | 51 +++++++++++++++++++++++++------
 2 files changed, 46 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index 1244d8e17d504..e14ea6ebc7a24 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -173,11 +173,13 @@ config MAX31865
 	  will be called max31865.
 
 config MCP9600
-	tristate "MCP9600 thermocouple EMF converter"
+	tristate "MCP9600 and similar thermocouple EMF converters"
 	depends on I2C
 	help
-	  If you say yes here you get support for MCP9600
-	  thermocouple EMF converter connected via I2C.
+	  If you say yes here you get support for:
+	  - MCP9600
+	  - MCP9601
+	  and similar thermocouple EMF converters connected via I2C.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called mcp9600.
diff --git a/drivers/iio/temperature/mcp9600.c b/drivers/iio/temperature/mcp9600.c
index 40906bb200ec9..c18ae17b6d82f 100644
--- a/drivers/iio/temperature/mcp9600.c
+++ b/drivers/iio/temperature/mcp9600.c
@@ -42,6 +42,7 @@
 
 /* MCP9600 device id value */
 #define MCP9600_DEVICE_ID_MCP9600	0x40
+#define MCP9600_DEVICE_ID_MCP9601	0x41
 
 #define MCP9600_ALERT_COUNT		4
 
@@ -123,6 +124,11 @@ static const struct iio_chan_spec mcp9600_channels[][2] = {
 	MCP9600_CHANNELS(2, 0, 2, 0), /* Alerts: 1 2 3 4 */
 };
 
+struct mcp_chip_info {
+	u8 chip_id;
+	const char *chip_name;
+};
+
 struct mcp9600_data {
 	struct i2c_client *client;
 };
@@ -416,16 +422,29 @@ static int mcp9600_probe_alerts(struct iio_dev *indio_dev)
 
 static int mcp9600_probe(struct i2c_client *client)
 {
+	const struct mcp_chip_info *chip_info = i2c_get_match_data(client);
 	struct iio_dev *indio_dev;
 	struct mcp9600_data *data;
-	int ret, ch_sel;
+	int ch_sel, dev_id, ret;
+
+	dev_id = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID);
+	if (dev_id < 0)
+		return dev_err_probe(&client->dev, dev_id,
+				     "Failed to read device ID\n");
+
+	switch (dev_id) {
+	case MCP9600_DEVICE_ID_MCP9600:
+	case MCP9600_DEVICE_ID_MCP9601:
+		if (dev_id != chip_info->chip_id)
+			dev_warn(&client->dev,
+				"Expected id %02x, but device responded with %02\n",
+				 chip_info->chip_id, dev_id);
+		break;
 
-	ret = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID);
-	if (ret < 0)
-		return dev_err_probe(&client->dev, ret, "Failed to read device ID\n");
-	if (ret != MCP9600_DEVICE_ID_MCP9600)
-		dev_warn(&client->dev, "Expected ID %x, got %x\n",
-				MCP9600_DEVICE_ID_MCP9600, ret);
+	default:
+		dev_warn(&client->dev, "Unknown id %x, using %x\n", dev_id,
+			 chip_info->chip_id);
+	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
@@ -439,7 +458,7 @@ static int mcp9600_probe(struct i2c_client *client)
 		return ch_sel;
 
 	indio_dev->info = &mcp9600_info;
-	indio_dev->name = "mcp9600";
+	indio_dev->name = chip_info->chip_name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = mcp9600_channels[ch_sel];
 	indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels[ch_sel]);
@@ -447,14 +466,26 @@ static int mcp9600_probe(struct i2c_client *client)
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
+static const struct mcp_chip_info mcp9600_chip_info = {
+	.chip_id   = MCP9600_DEVICE_ID_MCP9600,
+	.chip_name = "mcp9600",
+};
+
+static const struct mcp_chip_info mcp9601_chip_info = {
+	.chip_id   = MCP9600_DEVICE_ID_MCP9601,
+	.chip_name = "mcp9601",
+};
+
 static const struct i2c_device_id mcp9600_id[] = {
-	{ "mcp9600" },
+	{ "mcp9600", .driver_data = (kernel_ulong_t)&mcp9600_chip_info },
+	{ "mcp9601", .driver_data = (kernel_ulong_t)&mcp9601_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mcp9600_id);
 
 static const struct of_device_id mcp9600_of_match[] = {
-	{ .compatible = "microchip,mcp9600" },
+	{ .compatible = "microchip,mcp9600", .data = &mcp9600_chip_info },
+	{ .compatible = "microchip,mcp9601", .data = &mcp9601_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp9600_of_match);
-- 
2.50.1