| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aKBXscthC1U6x5b4@pie>
Date: Sat, 16 Aug 2025 10:04:33 +0000
From: Yao Zi <ziyao@...root.org>
To: Icenowy Zheng <uwu@...nowy.me>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Drew Fustini <fustini@...nel.org>, Guo Ren <guoren@...nel.org>,
Fu Wei <wefu@...hat.com>, Philipp Zabel <p.zabel@...gutronix.de>,
Heiko Stuebner <heiko@...ech.de>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Michal Wilczynski <m.wilczynski@...sung.com>
Cc: Han Gao <rabenda.cn@...il.com>, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: Re: [RFC PATCH 3/8] drm: verisilicon: add a driver for Verisilicon
display controllers
On Fri, Aug 15, 2025 at 12:40:43AM +0800, Icenowy Zheng wrote:
> This is a from-scratch driver targeting Verisilicon DC-series display
> controllers, which feature self-identification functionality like their
> GC-series GPUs.
>
> Only DC8200 is being supported now, and only the main framebuffer is set
> up (as the DRM primary plane). Support for more DC models and more
> features is my further targets.
>
> As the display controller is delivered to SoC vendors as a whole part,
> this driver does not use component framework and extra bridges inside a
> SoC is expected to be implemented as dedicated bridges (this driver
> properly supports bridge chaining).
>
> Signed-off-by: Icenowy Zheng <uwu@...nowy.me>
Thank you for the great work!
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/verisilicon/Kconfig | 15 +
> drivers/gpu/drm/verisilicon/Makefile | 5 +
> drivers/gpu/drm/verisilicon/vs_bridge.c | 330 ++++++++++++++++++
> drivers/gpu/drm/verisilicon/vs_bridge.h | 40 +++
> drivers/gpu/drm/verisilicon/vs_bridge_regs.h | 47 +++
> drivers/gpu/drm/verisilicon/vs_crtc.c | 217 ++++++++++++
> drivers/gpu/drm/verisilicon/vs_crtc.h | 29 ++
> drivers/gpu/drm/verisilicon/vs_crtc_regs.h | 60 ++++
> drivers/gpu/drm/verisilicon/vs_dc.c | 233 +++++++++++++
> drivers/gpu/drm/verisilicon/vs_dc.h | 39 +++
> drivers/gpu/drm/verisilicon/vs_dc_top_regs.h | 27 ++
> drivers/gpu/drm/verisilicon/vs_drm.c | 177 ++++++++++
> drivers/gpu/drm/verisilicon/vs_drm.h | 29 ++
> drivers/gpu/drm/verisilicon/vs_hwdb.c | 150 ++++++++
> drivers/gpu/drm/verisilicon/vs_hwdb.h | 29 ++
> drivers/gpu/drm/verisilicon/vs_plane.c | 102 ++++++
> drivers/gpu/drm/verisilicon/vs_plane.h | 68 ++++
> .../gpu/drm/verisilicon/vs_primary_plane.c | 166 +++++++++
> .../drm/verisilicon/vs_primary_plane_regs.h | 53 +++
> 21 files changed, 1819 insertions(+)
> create mode 100644 drivers/gpu/drm/verisilicon/Kconfig
> create mode 100644 drivers/gpu/drm/verisilicon/Makefile
> create mode 100644 drivers/gpu/drm/verisilicon/vs_bridge.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_bridge.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_bridge_regs.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc_regs.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_top_regs.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_drm.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_drm.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_hwdb.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_hwdb.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.h
> create mode 100644 drivers/gpu/drm/verisilicon/vs_primary_plane.c
> create mode 100644 drivers/gpu/drm/verisilicon/vs_primary_plane_regs.h
>
...
> diff --git a/drivers/gpu/drm/verisilicon/vs_bridge.c b/drivers/gpu/drm/verisilicon/vs_bridge.c
> new file mode 100644
> index 0000000000000..c8caf31fac7d6
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/vs_bridge.c
...
> +static bool vs_bridge_out_dp_fmt_supported(u32 out_fmt)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(vsdc_dp_supported_fmts); i++)
> + if (vsdc_dp_supported_fmts[i].linux_fmt == out_fmt)
> + break;
> +
> + return !(i == ARRAY_SIZE(vsdc_dp_supported_fmts));
You could simplify the return statement by returning early in the loop
if out_fmt matches.
> +}
> +static int vs_bridge_detect_output_interface(struct device_node *of_node,
> + unsigned int output)
> +{
> + int ret;
> + struct device_node *remote;
> +
> + remote = of_graph_get_remote_node(of_node, output,
> + VSDC_OUTPUT_INTERFACE_DPI);
> + if (remote) {
> + ret = VSDC_OUTPUT_INTERFACE_DPI;
> + } else {
> + remote = of_graph_get_remote_node(of_node, output,
> + VSDC_OUTPUT_INTERFACE_DP);
> + if (remote)
> + ret = VSDC_OUTPUT_INTERFACE_DP;
> + else
> + ret = -ENODEV;
> + }
remote is leaked here, it should be released with of_node_put IMHO.
> + return ret;
> +}
> +
> +struct vs_bridge *vs_bridge_init(struct drm_device *drm_dev,
> + struct vs_crtc *crtc)
> +{
> + unsigned int output = crtc->id;
> + struct vs_bridge *bridge;
> + struct drm_bridge *next;
> + enum vs_bridge_output_interface intf;
> + int ret;
...
> + bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL);
> + if (!bridge)
> + return ERR_PTR(-ENOMEM);
...
> +err_cleanup_encoder:
> + drm_encoder_cleanup(&bridge->enc);
> +err_free_bridge:
> + devm_kfree(drm_dev->dev, bridge);
Though is technically correct, this devm_kfree() is unnecessary.
Resources registered with devres are automatically released when probing
fails[1][2].
> + return ERR_PTR(ret);
> +}
...
> diff --git a/drivers/gpu/drm/verisilicon/vs_crtc.c b/drivers/gpu/drm/verisilicon/vs_crtc.c
> new file mode 100644
> index 0000000000000..46c4191b82f49
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/vs_crtc.c
> @@ -0,0 +1,217 @@
...
> +static enum drm_mode_status
> +vs_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode)
> +{
> + struct vs_crtc *vcrtc = drm_crtc_to_vs_crtc(crtc);
> + struct vs_dc *dc = vcrtc->dc;
> + unsigned int output = vcrtc->id;
> + long rate;
> +
> + if (mode->htotal > 0x7FFF)
> + return MODE_BAD_HVALUE;
> + if (mode->vtotal > 0x7FFF)
> + return MODE_BAD_VVALUE;
> +
> + rate = clk_round_rate(dc->pix_clk[output], mode->clock * 1000);
> + if (rate <= 0)
> + return MODE_CLOCK_RANGE;
Some round_rate implementations may not return zero or error on an
unsupported clock rate, instead they simply return a value differing a
lot from the requested rate. Thus I think you should also check whether
the resulted rate is acceptable as well, which applies for
vs_crtc_mode_fixup() as well.
> + return MODE_OK;
> +}
> +
> +static bool vs_crtc_mode_fixup(struct drm_crtc *crtc,
> + const struct drm_display_mode *m,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct vs_crtc *vcrtc = drm_crtc_to_vs_crtc(crtc);
> + struct vs_dc *dc = vcrtc->dc;
> + unsigned int output = vcrtc->id;
> + long clk_rate;
> +
> + drm_mode_set_crtcinfo(adjusted_mode, 0);
> +
> + /* Feedback the pixel clock to crtc_clock */
> + clk_rate = adjusted_mode->crtc_clock * 1000;
> + clk_rate = clk_round_rate(dc->pix_clk[output], clk_rate);
> + if (clk_rate <= 0)
> + return false;
> +
> + adjusted_mode->crtc_clock = clk_rate / 1000;
> +
> + return true;
> +}
...
> +struct vs_crtc *vs_crtc_init(struct drm_device *drm_dev, struct vs_dc *dc,
> + unsigned int output)
> +{
> + struct vs_crtc *vcrtc;
> + struct drm_plane *primary;
> + int ret;
> +
> + vcrtc = devm_kzalloc(drm_dev->dev, sizeof(*vcrtc), GFP_KERNEL);
> + if (!vcrtc)
> + return ERR_PTR(-ENOMEM);
> + vcrtc->dc = dc;
> + vcrtc->id = output;
> +
> + /* Create our primary plane */
> + primary = vs_primary_plane_init(drm_dev, dc);
> + if (IS_ERR(primary)) {
> + dev_err(drm_dev->dev, "Couldn't create the primary plane\n");
> + return ERR_PTR(PTR_ERR(primary));
> + }
Suggest dev_err_probe which handles deferred probing as well.
> +
> + ret = drm_crtc_init_with_planes(drm_dev, &vcrtc->base,
> + primary,
> + NULL,
> + &vs_crtc_funcs,
> + NULL);
> + if (ret) {
> + dev_err(drm_dev->dev, "Couldn't initialize CRTC\n");
> + return ERR_PTR(ret);
> + }
> +
> + drm_crtc_helper_add(&vcrtc->base, &vs_crtc_helper_funcs);
> +
> + return vcrtc;
> +}
...
> diff --git a/drivers/gpu/drm/verisilicon/vs_dc.c b/drivers/gpu/drm/verisilicon/vs_dc.c
> new file mode 100644
> index 0000000000000..98384559568c4
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/vs_dc.c
> @@ -0,0 +1,233 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2025 Icenowy Zheng <uwu@...nowy.me>
> + */
> +
> +#include <linux/dma-mapping.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +
> +#include "vs_crtc.h"
> +#include "vs_dc.h"
> +#include "vs_dc_top_regs.h"
> +#include "vs_drm.h"
> +#include "vs_hwdb.h"
> +
> +static const struct regmap_config vs_dc_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = sizeof(u32),
> + /* VSDC_OVL_CONFIG_EX(1) */
> + .max_register = 0x2544,
> + .cache_type = REGCACHE_NONE,
I think cache_type = REGCACHE_NONE is the default, thus it should be
okay to omitted it?
> +};
...
> +static int vs_dc_probe(struct platform_device *pdev)
> +{
...
> + dc->core_clk = devm_clk_get(dev, "core");
> + if (IS_ERR(dc->core_clk)) {
> + dev_err(dev, "can't get core clock\n");
> + return PTR_ERR(dc->core_clk);
> + }
> +
> + dc->axi_clk = devm_clk_get(dev, "axi");
> + if (IS_ERR(dc->axi_clk)) {
> + dev_err(dev, "can't get axi clock\n");
> + return PTR_ERR(dc->axi_clk);
> + }
> +
> + dc->ahb_clk = devm_clk_get(dev, "ahb");
> + if (IS_ERR(dc->ahb_clk)) {
> + dev_err(dev, "can't get ahb clock\n");
> + return PTR_ERR(dc->ahb_clk);
> + }
I think devm_clk_get_enabled() will help here.
> + for (i = 0; i < outputs; i++) {
> + snprintf(pixclk_name, sizeof(pixclk_name), "pix%u", i);
> + dc->pix_clk[i] = devm_clk_get(dev, pixclk_name);
> + if (IS_ERR(dc->pix_clk[i])) {
> + dev_err(dev, "can't get pixel clk %u\n", i);
> + return PTR_ERR(dc->pix_clk[i]);
> + }
> + }
...
> +err_ahb_clk_disable:
> + clk_disable_unprepare(dc->ahb_clk);
> +err_axi_clk_disable:
> + clk_disable_unprepare(dc->axi_clk);
> +err_core_clk_disable:
> + clk_disable_unprepare(dc->core_clk);
And you could get avoid these clk_disable_unprepare(). Also the ones in
the remove callback.
> +err_rst_assert:
> + reset_control_bulk_assert(VSDC_RESET_COUNT, dc->rsts);
> + return ret;
> +}
> +
> +static void vs_dc_remove(struct platform_device *pdev)
> +{
> + struct vs_dc *dc = dev_get_drvdata(&pdev->dev);
> +
> + vs_drm_finalize(dc);
> +
> + dev_set_drvdata(&pdev->dev, NULL);
> +
> + clk_disable_unprepare(dc->ahb_clk);
> + clk_disable_unprepare(dc->axi_clk);
> + clk_disable_unprepare(dc->core_clk);
> + reset_control_bulk_assert(VSDC_RESET_COUNT, dc->rsts);
> +}
...
> diff --git a/drivers/gpu/drm/verisilicon/vs_primary_plane.c b/drivers/gpu/drm/verisilicon/vs_primary_plane.c
> new file mode 100644
> index 0000000000000..25d6e01cc8b71
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/vs_primary_plane.c
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2025 Icenowy Zheng <uwu@...nowy.me>
> + */
> +
> +#include <linux/regmap.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_fb_dma_helper.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_gem_atomic_helper.h>
> +#include <drm/drm_gem_dma_helper.h>
> +#include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_plane.h>
> +#include <drm/drm_print.h>
> +
> +#include "vs_crtc.h"
> +#include "vs_plane.h"
> +#include "vs_dc.h"
> +#include "vs_primary_plane_regs.h"
> +
> +static int vs_primary_plane_atomic_check(struct drm_plane *plane,
> + struct drm_atomic_state *state)
> +{
> + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> + plane);
> + struct drm_crtc *crtc = new_plane_state->crtc;
> + struct drm_crtc_state *crtc_state;
> +
> + if (!crtc)
> + return 0;
> +
> + crtc_state = drm_atomic_get_existing_crtc_state(state,
> + crtc);
I think these arguments could be merged into a single line.
> + if (WARN_ON(!crtc_state))
> + return -EINVAL;
> +
> + return drm_atomic_helper_check_plane_state(new_plane_state,
> + crtc_state,
> + DRM_PLANE_NO_SCALING,
> + DRM_PLANE_NO_SCALING,
> + false, true);
> +}
...
> +struct drm_plane *vs_primary_plane_init(struct drm_device *drm_dev, struct vs_dc *dc)
> +{
> + struct drm_plane *plane;
> + int ret;
> +
> + plane = devm_kzalloc(drm_dev->dev, sizeof(*plane), GFP_KERNEL);
> + if (!plane)
> + return ERR_PTR(-ENOMEM);
> +
> + ret = drm_universal_plane_init(drm_dev, plane, 0,
> + &vs_primary_plane_funcs,
> + dc->identity.formats->array,
> + dc->identity.formats->num,
> + NULL,
> + DRM_PLANE_TYPE_PRIMARY,
> + NULL);
> +
> + if (ret) {
> + devm_kfree(drm_dev->dev, plane);
Similar to vs_bridge_init's case, this devm_kfree() isn't unnecessary,
either.
> + return ERR_PTR(ret);
> + }
> +
> + drm_plane_helper_add(plane, &vs_primary_plane_helper_funcs);
> +
> + return plane;
> +}
Best regards,
Yao Zi
[1]: https://elixir.bootlin.com/linux/v6.16/source/drivers/base/dd.c#L723
[2]: https://elixir.bootlin.com/linux/v6.16/source/drivers/base/dd.c#L549
Powered by blists - more mailing lists