linux-kernel - Re: [PATCH] pinctrl: spacemit: remove extra line in debug output

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CACRpkdYK5-Ga+TpwKSroZN_Tku7R7gwA6LrV52W8ydYOqmLk+w@mail.gmail.com>
Date: Mon, 18 Aug 2025 17:17:47 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Hendrik Hamerlinck <hendrik.hamerlinck@...mernet.be>
Cc: dlan@...too.org, skhan@...uxfoundation.org, 
	linux-kernel-mentees@...ts.linux.dev, linux-gpio@...r.kernel.org, 
	linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] pinctrl: spacemit: remove extra line in debug output

On Tue, Aug 5, 2025 at 5:08 PM Hendrik Hamerlinck
<hendrik.hamerlinck@...mernet.be> wrote:

> The debug output for spacemit_pinconf_dbg_show() prints an extra newline
> at the end. This is redundant as pinconf_pins_show() in pinconf.c already
> adds a newline in its for loop.
>
> Remove the newline to avoid the extra line in the output.
>
> Example current output:
> $ cat /sys/kernel/debug/pinctrl/d401e000.pinctrl/pinconf-pins
> Pin config settings per pin
> Format: pin (name): configs
> pin 0 (GPIO_00): , bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
>
> pin 1 (GPIO_01): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
>
> pin 2 (GPIO_02): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
>
> ...
>
> Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@...mernet.be>

Patch applied!

Yours,
Linus Walleij