[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250819053205.9976-2-mike.looijmans@topic.nl>
Date: Tue, 19 Aug 2025 07:31:14 +0200
From: Mike Looijmans <mike.looijmans@...ic.nl>
To: dri-devel@...ts.freedesktop.org
CC: Mike Looijmans <mike.looijmans@...ic.nl>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Conor Dooley <conor+dt@...nel.org>,
David Airlie <airlied@...il.com>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Jonas Karlman <jonas@...boo.se>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Rob Herring <robh@...nel.org>,
Robert Foss <rfoss@...nel.org>,
Simona Vetter <simona@...ll.ch>,
Thomas Zimmermann <tzimmermann@...e.de>,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/2] dt-bindings: drm/bridge: ti-tmds181: Add TI TMDS181 and SN65DP159 bindings
Add DT binding document for TI TMDS181 and SN65DP159 HDMI retimers.
Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
---
Changes in v2:
Document driver specific bindings like slew-rate and threshold
.../bindings/display/bridge/ti,tmds181.yaml | 143 ++++++++++++++++++
1 file changed, 143 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tmds181.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tmds181.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tmds181.yaml
new file mode 100644
index 000000000000..816bea54846f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tmds181.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,tmds181.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMDS181 and SN65DP159 HDMI retimer/redriver chips
+
+maintainers:
+ - Mike Looijmans <mike.looijmans@...ic.nl>
+
+description: |
+ Texas Instruments TMDS181 and SN65DP159 retimer and redriver chips.
+ https://www.ti.com/product/TMDS181
+ https://www.ti.com/product/TMDS181
+
+properties:
+ compatible:
+ enum:
+ - ti,tmds181
+ - ti,sn65dp159
+
+ reg:
+ enum:
+ - 0x5b
+ - 0x5c
+ - 0x5d
+ - 0x5e
+
+ oe-gpios:
+ maxItems: 1
+ description: GPIO specifier for OE pin (active high).
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for HDMI (ish) input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for HDMI output (panel or bridge)
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ required:
+ - port@0
+ - port@1
+
+ ti,source-mode:
+ type: boolean
+ description:
+ Force chip to operate in "source" mode. Allows to use
+ a TMDS181 chip (which defaults to sink) as cable driver.
+
+ ti,sink-mode:
+ type: boolean
+ description:
+ Force chip to operate in "sink" mode. Allows to use
+ a DP159 chip (defaults to source) for incoming signals.
+
+ ti,retimer-threshold-hz:
+ minimum: 25000000
+ maximum: 600000000
+ default: 200000000
+ description:
+ Cross-over point. Up until this pixel clock frequency
+ the chip remains in the low-power redriver mode. Above
+ the threshold the chip should operate in retimer mode.
+
+ ti,dvi-mode:
+ type: boolean
+ description: Makes the DP159 chip operate in DVI mode.
+
+ ti,slew-rate:
+ minimum: 0
+ maximum: 3
+ default: 3
+ description: Set slew rate, 0 is slowest, 3 is fastest.
+
+ ti,disable-equalizer:
+ type: boolean
+ description: Disable the equalizer (to save power).
+
+ ti,adaptive-equalizer:
+ type: boolean
+ description: Set the equalizer to adaptive mode.
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@5b {
+ compatible = "ti,sn65dp159";
+ reg = <0x5b>;
+
+ oe-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&encoder_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+ };
--
2.43.0
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@...ic.nl
W: www.topic.nl
Please consider the environment before printing this e-mail
Powered by blists - more mailing lists