[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250831095541.49568044.xunil@tahomasoft.com>
Date: Sun, 31 Aug 2025 09:55:41 -0400
From: Erik Beck <xunil@...omasoft.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: Heiko Stuebner <heiko@...ech.de>, Chukun Pan <amadeus@....edu.cn>, Rob
Herring <robh@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Krzysztof
Kozlowski <krzk+dt@...nel.org>, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH 0/4] arm64: dts: rockchip: Add HINLINK H66K/H68K
On Sat, 30 Aug 2025 18:20:50 -0400
Erik Beck <xunil@...omasoft.com> wrote:
> > On Aug 30, 2025, at 17:30, Andrew Lunn <andrew@...n.ch> wrote:
> >
> >
> >>
> >> As I worked on my dts, I discovered that the 1Gb ethernet ports, using an
> >> RTL8211, don't support rgmii-id mode; only rgmii.
> >> (https://www.realtek.com/Product/Index?id=3976&cate_id=786).
> >
> > Which exact RTL8211 does the board use? You link to information for
> > the RTL8211FD(I)-CG, which i assume is supported in Linux as RTL8211F.
>
> Thanks Andrew; It isn't clear to me which specific variation it has. I'll
> take another look at the boot logs and see. The silkscreen on the chips are
> faint, but will look there too.
dmesg reports it is an RTL8211F.
> >
> > https://elixir.bootlin.com/linux/v6.16.3/source/drivers/net/phy/realtek/realtek_main.c#L519
> >
> > This indicates it supports all four RGMII modes. And in general, all
> > PHY drivers in Linux for RGMII PHYs support all four RGMII modes.
> >
> >> Changing this makes a huge difference in the ethernet throughput speed.
> >> With rgmii-id mode specified, throughput is about 6.5 Mbs. Changing this
> >> to rgmii mode increases throughput to about 960 Mbs.
> >
> > Here is some more information about that the four RGMII modes mean,
> > and how you should use them in Linux:
> >
> > https://elixir.bootlin.com/linux/v6.16.3/source/Documentation/devicetree/bindings/net/ethernet-controller.yaml#L264
> >
> > Andrew
>
> Thank you!
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
Powered by blists - more mailing lists