[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aLhNgQJtimNmiN31@hu-wasimn-hyd.qualcomm.com>
Date: Wed, 3 Sep 2025 19:45:29 +0530
From: Wasim Nazir <wasim.nazir@....qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Richard Cochran <richardcochran@...il.com>, kernel@....qualcomm.com,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
netdev@...r.kernel.org,
Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>
Subject: Re: [PATCH v2 05/13] arm64: dts: qcom: lemans-evk: Enable GPI DMA
and QUPv3 controllers
On Wed, Sep 03, 2025 at 07:39:30PM +0530, Wasim Nazir wrote:
> On Wed, Sep 03, 2025 at 03:16:55PM +0300, Dmitry Baryshkov wrote:
> > On Wed, Sep 03, 2025 at 05:17:06PM +0530, Wasim Nazir wrote:
> > > From: Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>
> > >
> > > Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
> > > interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
> > > DMA and peripheral communication on the Lemans EVK platform.
> > >
> > > Signed-off-by: Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>
> > > Signed-off-by: Wasim Nazir <wasim.nazir@....qualcomm.com>
> > > ---
> > > arch/arm64/boot/dts/qcom/lemans-evk.dts | 20 ++++++++++++++++++++
> > > 1 file changed, 20 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > index c60629c3369e..196c5ee0dd34 100644
> > > --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > @@ -277,6 +277,18 @@ vreg_l8e: ldo8 {
> > > };
> > > };
> > >
> > > +&gpi_dma0 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&gpi_dma1 {
> > > + status = "okay";
> > > +};
> > > +
> > > +&gpi_dma2 {
> > > + status = "okay";
> > > +};
> > > +
> > > &i2c18 {
> > > status = "okay";
> > >
> > > @@ -367,10 +379,18 @@ &mdss0_dp1_phy {
> > > status = "okay";
> > > };
> > >
> > > +&qupv3_id_0 {
> > > + status = "okay";
> > > +};
> > > +
> > > &qupv3_id_1 {
> > > status = "okay";
> > > };
> > >
> > > +&qupv3_id_2 {
> > > + status = "okay";
> > > +};
> >
> > You've added i2c18 device in patch 1, but it could not be enabled before
> > this one because it's a part of QUP2.
>
> Thanks for pointing this, I will update it in next series.
>
Also I will try to update the clients in commit message too.
> >
> > > +
> > > &sleep_clk {
> > > clock-frequency = <32768>;
> > > };
> > >
> > > --
> > > 2.51.0
> > >
> >
> > --
> > With best wishes
> > Dmitry
>
> --
> Regards,
> Wasim
--
Regards,
Wasim
Powered by blists - more mailing lists