[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250905-elite-enthusiastic-zebu-fec55c@kuoka>
Date: Fri, 5 Sep 2025 09:52:19 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Peng Fan <peng.fan@....com>
Cc: Marc Kleine-Budde <mkl@...gutronix.de>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Aswath Govindraju <a-govindraju@...com>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Frank Li <frank.li@....com>, Haibo Chen <haibo.chen@....com>,
linux-can@...r.kernel.org, linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v5 1/9] dt-bindings: phy: ti,tcan104x-can: Document NXP
TJA105X/1048
On Thu, Sep 04, 2025 at 04:36:44PM +0800, Peng Fan wrote:
> The TJA1048 is a dual high-speed CAN transceiver with sleep mode supported
> and no EN pin.
>
> The TJA1051 is a high-speed CAN transceiver with slient mode supported,
> but only TJA1051T/E has EN pin. To make it simple, make enable-gpios as
> optional for TJA1051.
>
> The TJA1057 is a high-speed CAN transceiver with slient mode supported
> and no EN pin.
>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
> .../devicetree/bindings/phy/ti,tcan104x-can.yaml | 69 +++++++++++++++++++++-
> 1 file changed, 66 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> index 4a8c3829d85d3c4a4963750d03567c1c345beb91..124493f360516eb203e8711cb96789258dd01119 100644
> --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> @@ -22,16 +22,26 @@ properties:
> - enum:
> - ti,tcan1042
> - ti,tcan1043
> + - nxp,tja1048
> + - nxp,tja1051
> + - nxp,tja1057
> - nxp,tjr1443
>
> '#phy-cells':
> - const: 0
> + enum: [0, 1]
>
> - standby-gpios:
> + silent-gpios:
> description:
> - gpio node to toggle standby signal on transceiver
> + gpio node to toggle silent signal on transceiver
> maxItems: 1
>
> + standby-gpios:
> + description:
> + gpio node to toggle standby signal on transceiver. For two Items, item 1
> + is for stbn1, item 2 is for stbn2.
> + minItems: 1
> + maxItems: 2
> +
> enable-gpios:
> description:
> gpio node to toggle enable signal on transceiver
> @@ -53,6 +63,59 @@ required:
> - compatible
> - '#phy-cells'
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: nxp,tja1048
> + then:
> + properties:
> + '#phy-cells':
> + const: 1
> + enable-gpios: false
> + silent-gpios: false
> + standby-gpios:
> + minItems: 2
> + else:
> + properties:
> + '#phy-cells':
> + const: 0
> + standby-gpios:
> + maxItems: 1
> +
> + - if:
> + properties:
> + compatible:
> + enum:
> + - nxp,tja1051
> + - nxp,tja1057
> + then:
> + properties:
> + silent-gpios: true
> + else:
> + properties:
> + silent-gpios: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: nxp,tja1051
This is here and in if earlier. Just keep in only one place. Also
earlier else also touches standby-gpios, so you basically have it in
multiple places.
Just define if:then:, without any else:, for each variant.
> + then:
> + properties:
> + standby-gpios: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: nxp,tja1057
This as well.
> + then:
> + properties:
> + enable-gpios: false
> + standby-gpios: false
> +
> additionalProperties: false
>
> examples:
>
> --
> 2.37.1
>
Powered by blists - more mailing lists