[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <22qi2loql3zbxrpxlu6hfxxeesxloxxmt7ohit5qtp6awpnzky@tplw7mirrk3r>
Date: Tue, 16 Sep 2025 13:30:51 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Bjorn Andersson <bjorn.andersson@....qualcomm.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] arm64: dts: qcom: qcm6490: Introduce Particle Tachyon
On Mon, Sep 15, 2025 at 10:26:30PM -0500, Bjorn Andersson wrote:
> On Fri, Sep 12, 2025 at 04:22:18AM +0300, Dmitry Baryshkov wrote:
> > On Thu, Sep 11, 2025 at 02:19:39PM -0500, Bjorn Andersson wrote:
> > > On Thu, Sep 11, 2025 at 03:01:35AM +0300, Dmitry Baryshkov wrote:
> > > > On Wed, Sep 10, 2025 at 06:05:36PM -0500, Bjorn Andersson wrote:
> > > > > Introduce the Particle Tachyon board (https://www.particle.io/tachyon/),
> > > > > a single board compute with 5G connectivity and AI accelerator.
> > > > >
> > > > > The boards currently ships with the Android Boot Loader, but replacing
> > > > > this with abl2esp allows writing a EFI System Parition and OS partitions
> > > > > to all of LUN0, and a more UEFI boot experience. A prebuilt version of
> > > > > abl2esp is provided at [1], as abl2esp-v6.elf.
> > > > >
> > > > > With a (very) recent version of QDL, a flash programmer from a Tachyon
> > > > > software release, and a full distro image, this can be achieved with:
> > > > >
> > > > > qdl prog_firehose_ddr.elf write abl_a abl2esp-v6.elf write abl_b abl2esp-v6.elf write 0 image.raw
> > > > >
> > > > > The following firmware files are currently used, on top of what's in
> > > > > linux-firmware already:
> > > > > qcom/qcm6490/particle/tachyon/a660_zap.mbn
> > > > > qcom/qcm6490/particle/tachyon/adsp.mbn
> > > > > qcom/qcm6490/particle/tachyon/cdsp.mbn
> > > > > qcom/qcm6490/particle/tachyon/ipa_fws.mbn
> > > > > qcom/qcm6490/particle/tachyon/modem.mbn
> > > >
> > > > Is it locked?
> > >
> > > It doesn't look that way.
> >
> > Then anything preventing us from using the default, non-signed FW?
> >
>
> Looking at the version, they are not from the same branch or year.
>
> I suggest that we stick with the firmware that the vendor has validated
> on their piece of hardware together with the other pieces of firmware,
> at least for now.
>
> Once/if we built confidence in the QLI firmware, we can replace these
> paths.
Ack.
--
With best wishes
Dmitry
Powered by blists - more mailing lists