[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <hioigg5kn4lf2rvmfdxahxsuxhe4unvdkaoy5esoxepgc4jf7f@2wg42pxz3iry>
Date: Wed, 17 Sep 2025 10:15:55 +0300
From: Ioana Ciornei <ioana.ciornei@....com>
To: Frank Li <Frank.li@....com>
Cc: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>, Bartosz Golaszewski <brgl@...ev.pl>,
Shawn Guo <shawnguo@...nel.org>, Michael Walle <mwalle@...nel.org>, Lee Jones <lee@...nel.org>,
devicetree@...r.kernel.org, linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/9] dt-bindings: fsl,fpga-qixis-i2c: extend support
to also cover the LX2160ARDB FPGA
On Tue, Sep 16, 2025 at 12:18:10PM -0400, Frank Li wrote:
> On Mon, Sep 15, 2025 at 03:23:47PM +0300, Ioana Ciornei wrote:
>
> subject:
> dt-bindings: fsl,fpga-qixis-i2c: add support for LX2160ARDB FPGA
>
> > Extend the list of supported compatible strings with fsl,lx2160ardb-fpga.
> >
> > Since the register map exposed by the LX2160ARDB's FPGA also contains
> > two GPIO controllers, accept the necessary GPIO pattern property.
> > At the same time, add the #address-cells and #size-cells properties as
> > valid ones so that the child nodes of the fsl,lx2160ardb-fpga node are
> > addressable.
> >
> > This is needed because when defining child devices such as the GPIO
> > controller described in the added example, the child device needs a the
> > reg property to properly identify its register location.
>
> These are neccesary because reg of child gpio controller nodes is in I2C
> device's address space.
Will incorporate the remark in this paragraph.
>
> need empty line here.
Ok.
>
> > Impose this restriction for the new compatible through an if-statement.
> >
> > Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
> > ---
> > Changes in v2:
> > - Enforce a unit address on the child gpios nodes (remove the ?)
> > - Enforce the use of unit addresses by having #address-size and
> > #size-cells only for the newly added fsl,lx2160ardb-fpga compatible
> >
> > .../bindings/board/fsl,fpga-qixis-i2c.yaml | 47 +++++++++++++++++++
> > 1 file changed, 47 insertions(+)
> >
> ...
>
> >
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,lx2160ardb-fpga
> > + then:
> > + required:
> > + - "#address-cells"
> > + - "#size-cells"
> > +
> else:
> properties:
> '#address-cells': false
> 'size-cells': false
So that we also catch the cases in which address-cells/size-cells
shoudn't be used. Will do.
Thanks,
Ioana
Powered by blists - more mailing lists