| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DS0PR11MB7829F99863149A2E6965E51AEA17A@DS0PR11MB7829.namprd11.prod.outlook.com>
Date: Wed, 17 Sep 2025 01:43:31 +0000
From: "Sun, Xinpeng" <xinpeng.sun@...el.com>
To: srinivas pandruvada <srinivas.pandruvada@...ux.intel.com>,
"jikos@...nel.org" <jikos@...nel.org>, "bentiss@...nel.org"
<bentiss@...nel.org>
CC: "linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "Xu, Even"
<even.xu@...el.com>, "Zhang, Rui1" <rui1.zhang@...el.com>
Subject: RE: [PATCH v3] hid: intel-thc-hid: intel-quicki2c: support ACPI
config for advanced features
> -----Original Message-----
> From: srinivas pandruvada <srinivas.pandruvada@...ux.intel.com>
> Sent: Wednesday, September 17, 2025 7:31 AM
> To: Sun, Xinpeng <xinpeng.sun@...el.com>; jikos@...nel.org; bentiss@...nel.org
> Cc: linux-input@...r.kernel.org; linux-kernel@...r.kernel.org; Xu, Even
> <even.xu@...el.com>; Zhang, Rui1 <rui1.zhang@...el.com>
> Subject: Re: [PATCH v3] hid: intel-thc-hid: intel-quicki2c: support ACPI config for
> advanced features
>
> On Tue, 2025-09-16 at 10:57 +0800, Xinpeng Sun wrote:
> > There is a new BIOS enhancement that adds the capability to configure
> > the following two features of I2C subsystem introduced in commit
> > 1ed0b48
> > ("Intel-thc: Introduce max input size control") and commit 3f2a921
> > ("Intel-thc: Introduce interrupt delay control"):
> > - Max input size control
> > - Interrupt delay control
> >
> > As BIOS is used for the configuration of these two features, change
> > driver data usage to indicate hardware capability, and add
> > corresponding ACPI configuration support in QuickI2C driver.
> >
> > Signed-off-by: Xinpeng Sun <xinpeng.sun@...el.com>
> > Tested-by: Rui Zhang <rui1.zhang@...el.com>
> > ---
> You need change log as this v3..
Will add change log and resend v3.
Thanks,
Xinpeng
>
> Thanks,
> Srinivas
>
> > .../intel-quicki2c/pci-quicki2c.c | 39 +++++++++++++++--
> > --
> > .../intel-quicki2c/quicki2c-dev.h | 24 +++++++++++-
> > 2 files changed, 53 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
> > b/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
> > index 854926b3cfd4..3ce5a692b92b 100644
> > --- a/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
> > +++ b/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
> > @@ -23,6 +23,7 @@
> >
> > static struct quicki2c_ddata ptl_ddata = {
> > .max_detect_size = MAX_RX_DETECT_SIZE_PTL,
> > + .max_interrupt_delay = MAX_RX_INTERRUPT_DELAY,
> > };
> >
> > /* THC QuickI2C ACPI method to get device properties */ @@ -200,6
> > +201,21 @@ static int quicki2c_get_acpi_resources(struct
> > quicki2c_device *qcdev)
> > return -EOPNOTSUPP;
> > }
> >
> > + if (qcdev->ddata) {
> > + qcdev->i2c_max_frame_size_enable = i2c_config.FSEN;
> > + qcdev->i2c_int_delay_enable = i2c_config.INDE;
> > +
> > + if (i2c_config.FSVL <= qcdev->ddata-
> > >max_detect_size)
> > + qcdev->i2c_max_frame_size = i2c_config.FSVL;
> > + else
> > + qcdev->i2c_max_frame_size = qcdev->ddata-
> > >max_detect_size;
> > +
> > + if (i2c_config.INDV <= qcdev->ddata-
> > >max_interrupt_delay)
> > + qcdev->i2c_int_delay = i2c_config.INDV;
> > + else
> > + qcdev->i2c_int_delay = qcdev->ddata-
> > >max_interrupt_delay;
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -441,17 +457,24 @@ static void quicki2c_dma_adv_enable(struct
> > quicki2c_device *qcdev)
> > * max input length <= THC detect capability, enable the feature
> > with device
> > * max input length.
> > */
> > - if (qcdev->ddata->max_detect_size >=
> > - le16_to_cpu(qcdev->dev_desc.max_input_len)) {
> > - thc_i2c_set_rx_max_size(qcdev->thc_hw,
> > - le16_to_cpu(qcdev-
> > >dev_desc.max_input_len));
> > + if (qcdev->i2c_max_frame_size_enable) {
> > + if (qcdev->i2c_max_frame_size >=
> > + le16_to_cpu(qcdev->dev_desc.max_input_len)) {
> > + thc_i2c_set_rx_max_size(qcdev->thc_hw,
> > + le16_to_cpu(qcdev-
> > >dev_desc.max_input_len));
> > + } else {
> > + dev_warn(qcdev->dev,
> > + "Max frame size is smaller than hid
> > max input length!");
> > + thc_i2c_set_rx_max_size(qcdev->thc_hw,
> > + le16_to_cpu(qcdev-
> > >i2c_max_frame_size));
> > + }
> > thc_i2c_rx_max_size_enable(qcdev->thc_hw, true);
> > }
> >
> > /* If platform supports interrupt delay feature, enable it with
> > given delay */
> > - if (qcdev->ddata->interrupt_delay) {
> > + if (qcdev->i2c_int_delay_enable) {
> > thc_i2c_set_rx_int_delay(qcdev->thc_hw,
> > - qcdev->ddata-
> > >interrupt_delay);
> > + qcdev->i2c_int_delay * 10);
> > thc_i2c_rx_int_delay_enable(qcdev->thc_hw, true);
> > }
> > }
> > @@ -464,10 +487,10 @@ static void quicki2c_dma_adv_enable(struct
> > quicki2c_device *qcdev)
> > */
> > static void quicki2c_dma_adv_disable(struct quicki2c_device *qcdev)
> > {
> > - if (qcdev->ddata->max_detect_size)
> > + if (qcdev->i2c_max_frame_size_enable)
> > thc_i2c_rx_max_size_enable(qcdev->thc_hw, false);
> >
> > - if (qcdev->ddata->interrupt_delay)
> > + if (qcdev->i2c_int_delay_enable)
> > thc_i2c_rx_int_delay_enable(qcdev->thc_hw, false);
> > }
> >
> > diff --git a/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
> > b/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
> > index d412eafcf9ea..0d423d5dd7a7 100644
> > --- a/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
> > +++ b/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
> > @@ -38,6 +38,8 @@
> >
> > /* PTL Max packet size detection capability is 255 Bytes */
> > #define MAX_RX_DETECT_SIZE_PTL 255
> > +/* Max interrupt delay capability is 2.56ms */
> > +#define MAX_RX_INTERRUPT_DELAY 256
> >
> > /* Default interrupt delay is 1ms, suitable for most devices */
> > #define DEFAULT_INTERRUPT_DELAY_US (1 * USEC_PER_MSEC)
> > @@ -101,6 +103,10 @@ struct quicki2c_subip_acpi_parameter {
> > * @HMTD: High Speed Mode Plus (3.4Mbits/sec) Serial Data Line
> > Transmit HOLD Period
> > * @HMRD: High Speed Mode Plus (3.4Mbits/sec) Serial Data Line
> > Receive HOLD Period
> > * @HMSL: Maximum length (in ic_clk_cycles) of suppressed spikes in
> > High Speed Mode
> > + * @FSEN: Maximum Frame Size Feature Enable Control
> > + * @FSVL: Maximum Frame Size Value (unit in Bytes)
> > + * @INDE: Interrupt Delay Feature Enable Control
> > + * @INDV: Interrupt Delay Value (unit in 10 us)
> > *
> > * Those properties get from QUICKI2C_ACPI_METHOD_NAME_ISUB method,
> > used for
> > * I2C timing configure.
> > @@ -127,17 +133,22 @@ struct quicki2c_subip_acpi_config {
> > u64 HMTD;
> > u64 HMRD;
> > u64 HMSL;
> > +
> > + u64 FSEN;
> > + u64 FSVL;
> > + u64 INDE;
> > + u64 INDV;
> > u8 reserved;
> > };
> >
> > /**
> > * struct quicki2c_ddata - Driver specific data for quicki2c device
> > * @max_detect_size: Identify max packet size detect for rx
> > - * @interrupt_delay: Identify interrupt detect delay for rx
> > + * @interrupt_delay: Identify max interrupt detect delay for rx
> > */
> > struct quicki2c_ddata {
> > u32 max_detect_size;
> > - u32 interrupt_delay;
> > + u32 max_interrupt_delay;
> > };
> >
> > struct device;
> > @@ -170,6 +181,10 @@ struct acpi_device;
> > * @report_len: The length of input/output report packet
> > * @reset_ack_wq: Workqueue for waiting reset response from device
> > * @reset_ack: Indicate reset response received or not
> > + * @i2c_max_frame_size_enable: Indicate max frame size feature
> > enabled or not
> > + * @i2c_max_frame_size: Max RX frame size (unit in Bytes)
> > + * @i2c_int_delay_enable: Indicate interrupt delay feature enabled
> > or not
> > + * @i2c_int_delay: Interrupt detection delay value (unit in 10 us)
> > */
> > struct quicki2c_device {
> > struct device *dev;
> > @@ -200,6 +215,11 @@ struct quicki2c_device {
> >
> > wait_queue_head_t reset_ack_wq;
> > bool reset_ack;
> > +
> > + u32 i2c_max_frame_size_enable;
> > + u32 i2c_max_frame_size;
> > + u32 i2c_int_delay_enable;
> > + u32 i2c_int_delay;
> > };
> >
> > #endif /* _QUICKI2C_DEV_H_ */
Powered by blists - more mailing lists