linux-kernel - Re: [PATCH 3/3] dmaengine: xilinx_dma: Optimize control register write and channel start logic in xilinx_dma_start

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <DCVR3DC53STM.3H636S2IWLLG9@folker-schwesinger.de>
Date: Thu, 18 Sep 2025 07:34:03 +0000
From: "Folker Schwesinger" <dev@...ker-schwesinger.de>
To: "Suraj Gupta" <suraj.gupta2@....com>, <vkoul@...nel.org>,
 <radhey.shyam.pandey@....com>, <michal.simek@....com>
Cc: <dmaengine@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
 <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/3] dmaengine: xilinx_dma: Optimize control register
 write and channel start logic in xilinx_dma_start_transfer

On Wed Sep 17, 2025 at 3:36 PM CEST, Suraj Gupta wrote:
> Optimize AXI DMA control register programming by consolidating
> coalesce count and delay configuration into a single register write.
> Previously, the coalesce count was written separately from the delay
> configuration, resulting in two register writes. Combine these into
> one write operation to reduce bus overhead.
> Additionally, avoid redundant channel starts by only calling
> xilinx_dma_start() when the channel is actually idle.
>
> Signed-off-by: Suraj Gupta <suraj.gupta2@....com>

Tested-by: Folker Schwesinger <dev@...ker-schwesinger.de>

> ---
>  drivers/dma/xilinx/xilinx_dma.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index 7211c394cdca..6e9bf4732ded 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -1561,7 +1561,6 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
>  		reg &= ~XILINX_DMA_CR_COALESCE_MAX;
>  		reg |= chan->desc_pendingcount <<
>  				  XILINX_DMA_CR_COALESCE_SHIFT;
> -		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
>  	}
>  
>  	if (chan->has_sg && list_empty(&chan->active_list))
> @@ -1571,7 +1570,8 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
>  	reg  |= chan->irq_delay << XILINX_DMA_CR_DELAY_SHIFT;
>  	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
>  
> -	xilinx_dma_start(chan);
> +	if (chan->idle)
> +		xilinx_dma_start(chan);
>  
>  	if (chan->err)
>  		return;