linux-kernel - Re: [PATCH v5 05/14] phy: qcom: qmp-usbc: Move reset config into PHY cfg

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <z6x3bwb7izywozeran5aq64uw4tiwlbwx4kekoy3vv3vt7qyip@2ibiat5focw2>
Date: Mon, 22 Sep 2025 12:39:05 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
Cc: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Rob Clark <robin.clark@....qualcomm.com>,
        Dmitry Baryshkov <lumag@...nel.org>,
        Abhinav Kumar <abhinav.kumar@...ux.dev>,
        Jessica Zhang <jessica.zhang@....qualcomm.com>,
        Sean Paul <sean@...rly.run>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        fange.zhang@....qualcomm.com, yongxing.mou@....qualcomm.com,
        li.liu@....qualcomm.com, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>
Subject: Re: [PATCH v5 05/14] phy: qcom: qmp-usbc: Move reset config into PHY
 cfg

On Fri, Sep 19, 2025 at 10:24:22PM +0800, Xiangxu Yin wrote:
> Move resets to qmp_phy_cfg for per-PHY customization. Keep legacy DT
> path on the old hardcoded list; non-legacy path uses cfg->reset_list.
> 
> Signed-off-by: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> index 3b48c69f9c3cb7daec495ebc281b83fe34e56881..3d228db9ef0882eb76e7ab9e82f8122fa9cfe314 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> @@ -335,7 +335,8 @@ struct qmp_phy_cfg {
>  	int (*configure_dp_phy)(struct qmp_usbc *qmp);
>  	int (*calibrate_dp_phy)(struct qmp_usbc *qmp);
>  
> -	/* regulators to be requested */
> +	const char * const *reset_list;
> +	int num_resets;
>  	const struct regulator_bulk_data *vreg_list;
>  	int num_vregs;
>  
> @@ -428,6 +429,10 @@ static const char * const usb3phy_reset_l[] = {
>  	"phy_phy", "phy",
>  };
>  
> +static const char * const usb3dpphy_reset_l[] = {
> +	"phy_phy", "dp_phy",
> +};

This is unused in this patch. It should go to the patch adding QCS615 DP
PHY compatible and the rest of the config data.

> +
>  static const struct regulator_bulk_data qmp_phy_msm8998_vreg_l[] = {
>  	{ .supply = "vdda-phy", .init_load_uA = 68600 },
>  	{ .supply = "vdda-pll", .init_load_uA = 14200 },
> @@ -464,6 +469,8 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
>  	.rx_tbl_num             = ARRAY_SIZE(msm8998_usb3_rx_tbl),
>  	.pcs_tbl                = msm8998_usb3_pcs_tbl,
>  	.pcs_tbl_num            = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> +	.reset_list		= usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
>  	.vreg_list              = qmp_phy_msm8998_vreg_l,
>  	.num_vregs              = ARRAY_SIZE(qmp_phy_msm8998_vreg_l),
>  	.regs                   = qmp_v3_usb3phy_regs_layout,
> @@ -480,6 +487,8 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
>  	.rx_tbl_num		= ARRAY_SIZE(qcm2290_usb3_rx_tbl),
>  	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
>  	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> +	.reset_list		= usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
>  	.vreg_list		= qmp_phy_sm2290_vreg_l,
>  	.num_vregs		= ARRAY_SIZE(qmp_phy_sm2290_vreg_l),
>  	.regs			= qmp_v3_usb3phy_regs_layout_qcm2290,
> @@ -496,6 +505,8 @@ static const struct qmp_phy_cfg sdm660_usb3phy_cfg = {
>  	.rx_tbl_num		= ARRAY_SIZE(sdm660_usb3_rx_tbl),
>  	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
>  	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> +	.reset_list		= usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
>  	.vreg_list		= qmp_phy_msm8998_vreg_l,
>  	.num_vregs		= ARRAY_SIZE(qmp_phy_msm8998_vreg_l),
>  	.regs			= qmp_v3_usb3phy_regs_layout_qcm2290,
> @@ -512,6 +523,8 @@ static const struct qmp_phy_cfg qcs615_usb3phy_cfg = {
>  	.rx_tbl_num		= ARRAY_SIZE(qcm2290_usb3_rx_tbl),
>  	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
>  	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> +	.reset_list		= usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(usb3phy_reset_l),
>  	.vreg_list		= qmp_phy_qcs615_vreg_l,
>  	.num_vregs		= ARRAY_SIZE(qmp_phy_qcs615_vreg_l),
>  	.regs			= qmp_v3_usb3phy_regs_layout_qcm2290,
> @@ -1051,8 +1064,7 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
>  				     "failed to get pipe clock\n");
>  	}
>  
> -	ret = qmp_usbc_reset_init(qmp, usb3phy_reset_l,
> -				 ARRAY_SIZE(usb3phy_reset_l));
> +	ret = qmp_usbc_reset_init(qmp, cfg->reset_list, cfg->num_resets);
>  	if (ret)
>  		return ret;
>  
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry