linux-kernel - Re: [PATCH v5 05/10] arm64: dts: qcom: lemans-evk: Enable PCIe support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <vas7s6i43v32zdpn3skipqwz65rhvzl6zep6szmo7yoxfkeqer@uoqgm7gfjeyi>
Date: Wed, 24 Sep 2025 13:00:59 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>
To: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
Cc: Wasim Nazir <wasim.nazir@....qualcomm.com>,
        Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        Richard Cochran <richardcochran@...il.com>,
        Bartosz Golaszewski <brgl@...ev.pl>, kernel@....qualcomm.com,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        netdev@...r.kernel.org, linux-i2c@...r.kernel.org,
        Sushrut Shree Trivedi <quic_sushruts@...cinc.com>
Subject: Re: [PATCH v5 05/10] arm64: dts: qcom: lemans-evk: Enable PCIe
 support

On Wed, Sep 17, 2025 at 07:00:43PM +0530, Krishna Chaitanya Chundru wrote:
> 
> 
> On 9/17/2025 1:36 PM, Manivannan Sadhasivam wrote:
> > On Tue, Sep 16, 2025 at 04:16:53PM GMT, Wasim Nazir wrote:
> > > From: Sushrut Shree Trivedi <quic_sushruts@...cinc.com>
> > > 
> > > Enable PCIe0 and PCIe1 along with the respective phy-nodes.
> > > 
> > > PCIe0 is routed to an m.2 E key connector on the mainboard for wifi
> > > attaches while PCIe1 routes to a standard PCIe x4 expansion slot.
> > > 
> > 
> > Where did you define the supply for M.2 connector? We don't have a proper
> > binding for M.2 today, but atleast the supply should be modeled as a fixed
> > regulator with EN GPIOs as like other boards.
> > 
> > - Mani
> Hi Mani,
> 
> This board doesn't have any power supply for m.2 connector they are
> always powered on.
> 

Not even a fixed regulator? If so, it should be mentioned in the description.

- Mani

> - Krishna Chaitanya.
> > 
> > > Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@...cinc.com>
> > > Signed-off-by: Wasim Nazir <wasim.nazir@....qualcomm.com>
> > > ---
> > >   arch/arm64/boot/dts/qcom/lemans-evk.dts | 82 +++++++++++++++++++++++++++++++++
> > >   1 file changed, 82 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > index 97428d9e3e41..99400ff12cfd 100644
> > > --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> > > @@ -431,6 +431,40 @@ &mdss0_dp1_phy {
> > >   	status = "okay";
> > >   };
> > > +&pcie0 {
> > > +	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> > > +	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
> > > +
> > > +	pinctrl-0 = <&pcie0_default_state>;
> > > +	pinctrl-names = "default";
> > > +
> > > +	status = "okay";
> > > +};
> > > +
> > > +&pcie0_phy {
> > > +	vdda-phy-supply = <&vreg_l5a>;
> > > +	vdda-pll-supply = <&vreg_l1c>;
> > > +
> > > +	status = "okay";
> > > +};
> > > +
> > > +&pcie1 {
> > > +	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
> > > +	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
> > > +
> > > +	pinctrl-0 = <&pcie1_default_state>;
> > > +	pinctrl-names = "default";
> > > +
> > > +	status = "okay";
> > > +};
> > > +
> > > +&pcie1_phy {
> > > +	vdda-phy-supply = <&vreg_l5a>;
> > > +	vdda-pll-supply = <&vreg_l1c>;
> > > +
> > > +	status = "okay";
> > > +};
> > > +
> > >   &qupv3_id_0 {
> > >   	status = "okay";
> > >   };
> > > @@ -447,6 +481,54 @@ &sleep_clk {
> > >   	clock-frequency = <32768>;
> > >   };
> > > +&tlmm {
> > > +	pcie0_default_state: pcie0-default-state {
> > > +		clkreq-pins {
> > > +			pins = "gpio1";
> > > +			function = "pcie0_clkreq";
> > > +			drive-strength = <2>;
> > > +			bias-pull-up;
> > > +		};
> > > +
> > > +		perst-pins {
> > > +			pins = "gpio2";
> > > +			function = "gpio";
> > > +			drive-strength = <2>;
> > > +			bias-pull-up;
> > > +		};
> > > +
> > > +		wake-pins {
> > > +			pins = "gpio0";
> > > +			function = "gpio";
> > > +			drive-strength = <2>;
> > > +			bias-pull-up;
> > > +		};
> > > +	};
> > > +
> > > +	pcie1_default_state: pcie1-default-state {
> > > +		clkreq-pins {
> > > +			pins = "gpio3";
> > > +			function = "pcie1_clkreq";
> > > +			drive-strength = <2>;
> > > +			bias-pull-up;
> > > +		};
> > > +
> > > +		perst-pins {
> > > +			pins = "gpio4";
> > > +			function = "gpio";
> > > +			drive-strength = <2>;
> > > +			bias-pull-up;
> > > +		};
> > > +
> > > +		wake-pins {
> > > +			pins = "gpio5";
> > > +			function = "gpio";
> > > +			drive-strength = <2>;
> > > +			bias-pull-up;
> > > +		};
> > > +	};
> > > +};
> > > +
> > >   &uart10 {
> > >   	compatible = "qcom,geni-debug-uart";
> > >   	pinctrl-0 = <&qup_uart10_default>;
> > > 
> > > -- 
> > > 2.51.0
> > > 
> > 

-- 
மணிவண்ணன் சதாசிவம்