| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250925-v3_glymur_introduction-v2-23-8e1533a58d2d@oss.qualcomm.com>
Date: Thu, 25 Sep 2025 11:58:29 +0530
From: Pankaj Patil <pankaj.patil@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Pankaj Patil <pankaj.patil@....qualcomm.com>,
Wesley Cheng <wesley.cheng@....qualcomm.com>
Subject: [PATCH v2 23/24] arm64: dts: qcom: glymur: Add USB support
From: Wesley Cheng <wesley.cheng@....qualcomm.com>
The Glymur USB system contains 3 USB type C ports, and 1 USB multiport
controller. This encompasses 5 SS USB QMP PHYs (3 combo and 2 uni) and 5
M31 eUSB2 PHYs. The controllers are SNPS DWC3 based, and will use the
flattened DWC3 QCOM design.
Signed-off-by: Wesley Cheng <wesley.cheng@....qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur-crd.dts | 243 ++++++++++++++
arch/arm64/boot/dts/qcom/glymur.dtsi | 569 ++++++++++++++++++++++++++++++++
2 files changed, 812 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index 03aacdb1dd7e2354fe31e63183519e53fa022829..100519aa5a7cd905285d3aa41ebe5f63ae00aeef 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -99,10 +99,74 @@ ports {
port@0 {
reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in1: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
};
port@1 {
reg = <1>;
+
+ pmic_glink_ss_in1: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+ };
+ };
+
+ connector@2 {
+ compatible = "usb-c-connector";
+ reg = <2>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in2: endpoint {
+ remote-endpoint = <&usb_2_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in2: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ };
};
};
};
@@ -529,3 +593,182 @@ &pcie5port0 {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
};
+
+&i2c5 {
+ status = "ok";
+
+ clock-frequency = <400000>;
+
+ ptn3222_0: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+ vdd3v3-supply = <&vreg_l8b_e0_1p50>;
+ vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+
+ #phy-cells = <0>;
+ };
+
+ ptn3222_1: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ vdd3v3-supply = <&vreg_l8b_e0_1p50>;
+ vdd1v8-supply = <&vreg_l15b_e0_1p8>;
+
+ #phy-cells = <0>;
+ };
+};
+
+&smb2370_j_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_e0_1p8>;
+ vdd3-supply = <&vreg_l7b_e0_2p79>;
+};
+
+&smb2370_k_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_e0_1p8>;
+ vdd3-supply = <&vreg_l7b_e0_2p79>;
+};
+
+&smb2370_l_e2_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_e0_1p8>;
+ vdd3-supply = <&vreg_l7b_e0_2p79>;
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3f_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&smb2370_j_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l3f_e0_0p72>;
+ refgen-supply = <&vreg_l2f_e0_0p82>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_ss0 {
+ dr_mode = "otg";
+ usb-role-switch;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in1>;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in1>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3f_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&smb2370_k_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l1h_e0_0p89>;
+ refgen-supply = <&vreg_l2f_e0_0p82>;
+
+ status = "okay";
+};
+
+&usb1_ss1 {
+ dr_mode = "otg";
+ usb-role-switch;
+
+ status = "okay";
+};
+
+&usb_1_ss2_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in2>;
+};
+
+&usb_2_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in2>;
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l4c_e1_0p72>;
+ vdda12-supply = <&vreg_l4f_e1_1p08>;
+
+ phys = <&smb2370_l_e2_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+ vdda-phy-supply = <&vreg_l4f_e1_1p08>;
+ vdda-pll-supply = <&vreg_l4c_e1_0p72>;
+ refgen-supply = <&vreg_l1c_e1_0p82>;
+
+ status = "okay";
+};
+
+&usb1_ss2 {
+ dr_mode = "otg";
+ usb-role-switch;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2h_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&ptn3222_0>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2h_e0_0p72>;
+ vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+ phys = <&ptn3222_1>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l2h_e0_0p72>;
+ refgen-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+ vdda-pll-supply = <&vreg_l2h_e0_0p72>;
+ refgen-supply = <&vreg_l4f_e1_1p08>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 8a563d55bdd4902222039946dd75eaf4d3a4895b..c48d3a70820e551822c5322761528159da127ca6 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -2417,6 +2417,231 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ usb_mp_hsphy0: phy@...000 {
+ compatible = "qcom,glymur-m31-eusb2-phy",
+ "qcom,sm8750-m31-eusb2-phy";
+
+ reg = <0 0x00fa1000 0 0x29c>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsrcc TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_hsphy1: phy@...000 {
+ compatible = "qcom,glymur-m31-eusb2-phy",
+ "qcom,sm8750-m31-eusb2-phy";
+
+ reg = <0 0x00fa2000 0 0x29c>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsrcc TCSR_USB2_2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy0: phy@...000 {
+ compatible = "qcom,glymur-qmp-usb3-uni-phy";
+ reg = <0 0x00fa3000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&tcsrcc TCSR_USB3_0_CLKREF_EN>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+ clock-names = "aux",
+ "clkref",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_MP_SS0_PHY_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ clock-output-names = "usb3_uni_phy_0_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_mp_qmpphy1: phy@...000 {
+ compatible = "qcom,glymur-qmp-usb3-uni-phy";
+ reg = <0 0x00fa5000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+ <&tcsrcc TCSR_USB3_1_CLKREF_EN>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+ clock-names = "aux",
+ "clkref",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_MP_SS1_PHY_BCR>,
+ <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ clock-output-names = "usb3_uni_phy_1_pipe_clk_src";
+
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss0_hsphy: phy@...000 {
+ compatible = "qcom,glymur-m31-eusb2-phy",
+ "qcom,sm8750-m31-eusb2-phy";
+
+ reg = <0 0x00fd3000 0 0x29c>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss0_qmpphy: phy@...000 {
+ compatible = "qcom,glymur-qmp-usb3-dp-phy";
+ reg = <0 0x00fd5000 0 0x8000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc GCC_USB_0_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss0_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1_ss1_hsphy: phy@...000 {
+ compatible = "qcom,glymur-m31-eusb2-phy",
+ "qcom,sm8750-m31-eusb2-phy";
+
+ reg = <0 0x00fdd000 0 0x29c>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss1_qmpphy: phy@...000 {
+ compatible = "qcom,glymur-qmp-usb3-dp-phy";
+ reg = <0 0x00fde000 0 0x8000>;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>,
+ <&tcsrcc TCSR_USB4_1_CLKREF_EN>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe",
+ "clkref";
+
+ power-domains = <&gcc GCC_USB_1_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss1_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss1_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb1_ss1>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_ss1_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
cnoc_main: interconnect@...0000 {
compatible = "qcom,glymur-cnoc-main";
reg = <0x0 0x01500000 0x0 0x17080>;
@@ -2777,6 +3002,350 @@ lpass_ag_noc: interconnect@...0000 {
#interconnect-cells = <2>;
};
+ usb_1_ss2_hsphy: phy@...0000 {
+ compatible = "qcom,glymur-m31-eusb2-phy",
+ "qcom,sm8750-m31-eusb2-phy";
+
+ reg = <0 0x088e0000 0 0x29c>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsrcc TCSR_USB2_4_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_TERT_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2_qmpphy: phy@...1000 {
+ compatible = "qcom,glymur-qmp-usb3-dp-phy";
+ reg = <0 0x088e1000 0 0x8000>;
+
+ clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>,
+ <&tcsrcc TCSR_USB4_2_CLKREF_EN>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe",
+ "clkref";
+
+ power-domains = <&gcc GCC_USB_2_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_TERT_BCR>,
+ <&gcc GCC_USB3PHY_PHY_TERT_BCR>;
+ reset-names = "phy",
+ "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss2_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss2_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb1_ss2>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_ss2_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1_ss0: usb@...0000 {
+ compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a600000 0 0xfc100>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr_north",
+ "noc_aggr_south";
+
+ interrupts-extended = <&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 90 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 60 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ iommus = <&apps_smmu 0x1420 0x0>;
+ phys = <&usb_1_ss0_hsphy>,
+ <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,usb2-lpm-disable;
+
+ dr_mode = "peripheral";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_0_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_0_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+
+ usb1_ss1: usb@...0000 {
+ compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a800000 0 0xfc100>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr_north",
+ "noc_aggr_south";
+
+ interrupts-extended = <&intc GIC_SPI 875 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 88 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 87 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 76 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+ power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+
+ iommus = <&apps_smmu 0x1460 0x0>;
+
+ phys = <&usb_1_ss1_hsphy>,
+ <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,usb2-lpm-disable;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+
+ usb1_ss2: usb@...0000 {
+ compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a000000 0 0xfc100>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>,
+ <&gcc GCC_USB30_TERT_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>,
+ <&gcc GCC_USB30_TERT_SLEEP_CLK>,
+ <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr_north",
+ "noc_aggr_south";
+
+ interrupts-extended = <&intc GIC_SPI 871 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 89 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 81 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 75 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ resets = <&gcc GCC_USB30_TERT_BCR>;
+ power-domains = <&gcc GCC_USB30_TERT_GDSC>;
+
+ iommus = <&apps_smmu 0x420 0x0>;
+
+ phys = <&usb_1_ss2_hsphy>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,usb2-lpm-disable;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_2_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_2_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+
+ usb_mp: usb@...0000 {
+ compatible = "qcom,glymur-dwc3-mp", "qcom,snps-dwc3";
+ reg = <0 0x0a400000 0 0xfc100>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr_north",
+ "noc_aggr_south";
+
+ interrupts-extended = <&intc GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 12 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 11 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 13 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 78 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event_1",
+ "pwr_event_2",
+ "hs_phy_1",
+ "hs_phy_2",
+ "dp_hs_phy_1",
+ "dm_hs_phy_1",
+ "dp_hs_phy_2",
+ "dm_hs_phy_2",
+ "ss_phy_1",
+ "ss_phy_2";
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+ power-domains = <&gcc GCC_USB30_MP_GDSC>;
+
+ iommus = <&apps_smmu 0xda0 0x0>;
+
+ phys = <&usb_mp_hsphy0>,
+ <&usb_mp_qmpphy0>,
+ <&usb_mp_hsphy1>,
+ <&usb_mp_qmpphy1>;
+ phy-names = "usb2-0",
+ "usb3-0",
+ "usb2-1",
+ "usb3-1";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+ snps,dis_u3_susphy_quirk;
+ snps,usb2-lpm-disable;
+
+ dr_mode = "host";
+
+ status = "disabled";
+
+ };
+
dispcc: clock-controller@...0000 {
compatible = "qcom,glymur-dispcc";
reg = <0 0x0af00000 0 0x20000>;
--
2.34.1
Powered by blists - more mailing lists