linux-kernel - [PATCH 3/7] arm64: dts: exynos7870-j6lte: relocate ${x}-names property after ${x}

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250928-exynos7870-dt-fixes-v1-3-a40e77a73f16@disroot.org>
Date: Sun, 28 Sep 2025 22:13:54 +0530
From: Kaustabh Chakraborty <kauschluss@...root.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Kaustabh Chakraborty <kauschluss@...root.org>
Subject: [PATCH 3/7] arm64: dts: exynos7870-j6lte: relocate ${x}-names
 property after ${x}

All ${x}-names properties are conventionally placed after their
corresponding ${x} properties. For instance, 'clock-names' must follow
'clocks', 'interrupt-names' must follow 'interrupts'. Make necessary
changes to follow said convention. No functional changes made.

Signed-off-by: Kaustabh Chakraborty <kauschluss@...root.org>
---
 arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
index b8ce433b93b1b488da31bbe4846f8092243611ad..b2990b5466c949c18a61d1b1c4427986b19804ba 100644
--- a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts
@@ -47,8 +47,8 @@ gpio-hall-effect-sensor {
 		compatible = "gpio-keys";
 		label = "GPIO Hall Effect Sensor";
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&hall_irq>;
+		pinctrl-names = "default";
 
 		event-hall-effect-sensor {
 			label = "Hall Effect Sensor";
@@ -64,8 +64,8 @@ gpio-keys {
 		compatible = "gpio-keys";
 		label = "GPIO Keys";
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&key_power &key_voldown &key_volup>;
+		pinctrl-names = "default";
 
 		key-power {
 			label = "Power Key";
@@ -149,8 +149,8 @@ pmic@66 {
 		interrupt-parent = <&gpa0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq>;
+		pinctrl-names = "default";
 
 		regulators {
 			vdd_buck1: buck1 {
@@ -387,8 +387,8 @@ accelerometer@1d {
 		interrupt-parent = <&gpa2>;
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&accel_irq>;
+		pinctrl-names = "default";
 
 		mount-matrix = "-1", "0",  "0",
 				"0", "1",  "0",
@@ -413,8 +413,8 @@ touchscreen@20 {
 		interrupt-parent = <&gpa0>;
 		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&touch_irq>;
+		pinctrl-names = "default";
 
 		touchscreen-size-x = <720>;
 		touchscreen-size-y = <1480>;
@@ -424,8 +424,8 @@ touchscreen@20 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-names = "default";
 
 	vmmc-supply = <&vdd_ldo26>;
 	vqmmc-supply = <&vdd_ldo27>;
@@ -443,8 +443,8 @@ &mmc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
 
 	mmc-pwrseq = <&pwrseq_mmc1>;
 
@@ -462,17 +462,17 @@ &mmc1 {
 	wifi@1 {
 		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
 		reg = <0x1>;
-		interrupt-names = "host-wake";
 		interrupt-parent = <&gpa2>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
 
 		reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
 	};
 };
 
 &mmc2 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+	pinctrl-names = "default";
 
 	vmmc-supply = <&vdd_fixed_mmc2>;
 	vqmmc-supply = <&vdd_ldo2>;
@@ -591,8 +591,8 @@ &serial1 {
 	bluetooth {
 		compatible = "brcm,bcm43430a1-bt";
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+		pinctrl-names = "default";
 
 		device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;

-- 
2.51.0