| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250928-exynos7870-dt-fixes-v1-4-a40e77a73f16@disroot.org>
Date: Sun, 28 Sep 2025 22:13:55 +0530
From: Kaustabh Chakraborty <kauschluss@...root.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Kaustabh Chakraborty <kauschluss@...root.org>
Subject: [PATCH 4/7] arm64: dts: exynos7870-on7xelte: relocate ${x}-names
property after ${x}
All ${x}-names properties are conventionally placed after their
corresponding ${x} properties. For instance, 'clock-names' must follow
'clocks', 'interrupt-names' must follow 'interrupts'. Make necessary
changes to follow said convention. No functional changes made.
Signed-off-by: Kaustabh Chakraborty <kauschluss@...root.org>
---
arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
index b1d9eff5a82702cd7c9797b2124486207e03ad89..66413a9506276cca8925e644c0e857fb5c48112d 100644
--- a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts
@@ -47,8 +47,8 @@ gpio-keys {
compatible = "gpio-keys";
label = "GPIO Keys";
- pinctrl-names = "default";
pinctrl-0 = <&key_home &key_power &key_voldown &key_volup>;
+ pinctrl-names = "default";
key-home {
label = "Home Key";
@@ -139,8 +139,8 @@ pmic@66 {
interrupt-parent = <&gpa0>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
pinctrl-0 = <&pmic_irq>;
+ pinctrl-names = "default";
regulators {
vdd_buck1: buck1 {
@@ -385,8 +385,8 @@ touchscreen@70 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&touch_irq>;
+ pinctrl-names = "default";
syna,reset-delay-ms = <200>;
syna,startup-delay-ms = <200>;
@@ -423,8 +423,8 @@ accelerometer@1d {
interrupt-parent = <&gpa2>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
pinctrl-0 = <&accel_irq>;
+ pinctrl-names = "default";
mount-matrix = "1", "0", "0",
"0", "-1", "0",
@@ -449,16 +449,16 @@ proximity@48 {
interrupt-parent = <&gpa0>;
interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
- pinctrl-names = "default";
pinctrl-0 = <&proxm_irq>;
+ pinctrl-names = "default";
proximity-near-level = <25>;
};
};
&mmc0 {
- pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_rdqs &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ pinctrl-names = "default";
vmmc-supply = <&vdd_ldo26>;
vqmmc-supply = <&vdd_ldo27>;
@@ -476,8 +476,8 @@ &mmc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+ pinctrl-names = "default";
mmc-pwrseq = <&pwrseq_mmc1>;
@@ -495,17 +495,17 @@ &mmc1 {
wifi@1 {
compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
reg = <0x1>;
- interrupt-names = "host-wake";
interrupt-parent = <&gpa2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
reset-gpios = <&gpd3 6 GPIO_ACTIVE_LOW>;
};
};
&mmc2 {
- pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4 &dwmmc2_irq>;
+ pinctrl-names = "default";
vmmc-supply = <&vdd_fixed_mmc2>;
vqmmc-supply = <&vdd_ldo2>;
@@ -640,8 +640,8 @@ &serial1 {
bluetooth {
compatible = "brcm,bcm43430a1-bt";
- pinctrl-names = "default";
pinctrl-0 = <&bt_btwake &bt_hostwake &bt_enable>;
+ pinctrl-names = "default";
device-wakeup-gpios = <&gpa1 2 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpa1 6 GPIO_ACTIVE_HIGH>;
--
2.51.0
Powered by blists - more mailing lists