linux-kernel - [PATCH V1 1/1] USB: serial: f81232: fix incomplete serial port generation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251008023858.227740-1-peter_hong@fintek.com.tw>
Date: Wed, 8 Oct 2025 10:38:58 +0800
From: "Ji-Ze Hong (Peter Hong)" <peter_hong@...tek.com.tw>
To: <johan@...nel.org>
CC: <gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <tom_tsai@...tek.com.tw>,
        <yu_chen@...tek.com.tw>, <hpeter+linux_kernel@...il.com>,
        "Ji-Ze Hong (Peter
 Hong)" <peter_hong@...tek.com.tw>
Subject: [PATCH V1 1/1] USB: serial: f81232: fix incomplete serial port generation

The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.

Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.

Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)

Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@...tek.com.tw>
---
 drivers/usb/serial/f81232.c | 58 +++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 530b77fc2f78..84a9e3e43b5b 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -856,6 +856,41 @@ static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg,
 	return status;
 }
 
+static int f81534a_ctrl_get_register(struct usb_interface *intf, u16 reg,
+					u16 size, void *val)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	int retry = F81534A_ACCESS_REG_RETRY;
+	int status;
+
+	while (retry--) {
+		status = usb_control_msg_recv(dev,
+					      0,
+					      F81232_REGISTER_REQUEST,
+					      F81232_GET_REGISTER,
+					      reg,
+					      0,
+					      val,
+					      size,
+					      USB_CTRL_GET_TIMEOUT,
+					      GFP_KERNEL);
+		if (status) {
+			status = usb_translate_errors(status);
+			if (status == -EIO)
+				continue;
+		}
+
+		break;
+	}
+
+	if (status) {
+		dev_err(&intf->dev, "failed to get register 0x%x: %d\n",
+				reg, status);
+	}
+
+	return status;
+}
+
 static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en)
 {
 	unsigned char enable[2] = {0};
@@ -869,6 +904,29 @@ static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en)
 	 * bit 0~11	: Serial port enable bit.
 	 */
 	if (en) {
+		/*
+		 * The Fintek F81532A/534A/535/536 family relies on the
+		 * F81534A_CTRL_CMD_ENABLE_PORT (116h) register during
+		 * initialization to both determine serial port status and
+		 * control port creation.
+		 *
+		 * If the driver experiences fast load/unload cycles, the
+		 * device state may becomes unstable, resulting in the
+		 * incomplete generation of serial ports.
+		 *
+		 * Performing a dummy read operation on the register prior
+		 * to the initial write command resolves the issue.
+		 *
+		 * This clears the device's stale internal state. Subsequent
+		 * write operations will correctly generate all serial ports.
+		 */
+		status = f81534a_ctrl_get_register(intf,
+						F81534A_CTRL_CMD_ENABLE_PORT,
+						sizeof(enable),
+						enable);
+		if (status)
+			return status;
+
 		enable[0] = 0xff;
 		enable[1] = 0x8f;
 	}
-- 
2.34.1