lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c0b71974-65df-47ad-902b-45c2dbe66be0@kernel.org>
Date: Thu, 9 Oct 2025 15:06:42 +0100
From: Srinivas Kandagatla <srini@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
 Srinivas Kandagatla <srini@...nel.org>, Liam Girdwood <lgirdwood@...il.com>,
 Mark Brown <broonie@...nel.org>, Jaroslav Kysela <perex@...ex.cz>,
 Takashi Iwai <tiwai@...e.com>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
 Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-sound@...r.kernel.org, linux-arm-msm@...r.kernel.org,
 linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH RFC v2 2/6] ASoC: dt-bindings: qcom,sm8250: Add clocks
 properties for I2S



On 10/9/25 3:03 PM, Neil Armstrong wrote:
> On 10/9/25 15:36, Srinivas Kandagatla wrote:
>>
>>
>> On 10/8/25 7:56 PM, Neil Armstrong wrote:
>>> In order to describe the block and master clock of each I2S bus, add
>>> the first 5 I2S busses clock entries.
>>>
>>> The names (primary, secondary, tertiarty, quaternary, quinary, senary)
>>> uses the LPASS clock naming which were used for a long time on Qualcomm
>>> LPASS firmware interfaces.
>>>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
>>> ---
>>>   .../devicetree/bindings/sound/qcom,sm8250.yaml      | 21 ++++++++++
>>> +++++++++++
>>>   1 file changed, 21 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
>>> b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
>>> index
>>> 8ac91625dce5ccba5c5f31748c36296b12fac1a6..d1420d138b7ed8152aa53769c4d495e1674275e6 100644
>>> --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
>>> @@ -64,6 +64,27 @@ properties:
>>>       $ref: /schemas/types.yaml#/definitions/string
>>>       description: User visible long sound card name
>>>   +  clocks:
>>> +    minItems: 2
>>> +    maxItems: 12
>>> +
>>> +  clock-names:
>>> +    minItems: 2
>>> +    items:
>>> +      # mclk is the I2S Master Clock, mi2s the I2S Bit Clock
>>> +      - const: primary-mi2s
>>> +      - const: primary-mclk
>>> +      - const: secondary-mi2s
>>> +      - const: secondary-mclk
>>> +      - const: tertiary-mi2s
>>> +      - const: tertiary-mclk
>>> +      - const: quaternary-mi2s
>>> +      - const: quaternary-mclk
>>> +      - const: quinary-mi2s
>>> +      - const: quinary-mclk
>>> +      - const: senary-mi2s
>>> +      - const: senary-mclk
>>> +
>>
>> I don't this is correct way to handling bitclk and mclks for I2S, these
>> are normally handled as part of snd_soc_dai_set_sysclk() transparently
>> without need of any device tree description.
>>
>> Also doing this way is an issue as this is going to break existing Elite
>> based platforms, and the device description should not change across
>> these both audio firmwares.
> 
> This is only for AudioReach platforms, on those platforms the
> clocks are registered in DT and are not accessible by the card.
> 
Clocks will be acessable via snd_soc_dai_set_sysclk ->
q6prm_set_lpass_clock once set_sysclk support is added to q6apm-lpass
i2s dai ops.


> Device description is obviously different for the AudioReach platforms.

Why should it be different, its same device.
We have platforms that use both Elite and Audioreach.

--srini
> 
> Neil
> 
>>
>> thanks,
>> Srini
>>
>>>   patternProperties:
>>>     ".*-dai-link$":
>>>       description:
>>>
>>
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ