[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251011111150.553-1-hehuan1@eswincomputing.com>
Date: Sat, 11 Oct 2025 19:11:50 +0800
From: hehuan1@...incomputing.com
To: ulf.hansson@...aro.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
jszhang@...nel.org,
adrian.hunter@...el.com,
p.zabel@...gutronix.de,
linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: ningyu@...incomputing.com,
linmin@...incomputing.com,
pinkesh.vaghela@...fochips.com,
xuxiang@...incomputing.com,
luyulin@...incomputing.com,
dongxuyang@...incomputing.com,
zhangsenchuan@...incomputing.com,
weishangjuan@...incomputing.com,
lizhi2@...incomputing.com,
caohang@...incomputing.com,
hehuan1@...incomputing.com,
Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v4 1/2] dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin EIC7700
From: Huan He <hehuan1@...incomputing.com>
EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.
Signed-off-by: Huan He <hehuan1@...incomputing.com>
Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
---
.../bindings/mmc/snps,dwcmshc-sdhci.yaml | 57 +++++++++++++++++--
1 file changed, 51 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index f882219a0a26..edd6c8e90cad 100644
--- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -30,6 +30,7 @@ properties:
- sophgo,sg2002-dwcmshc
- sophgo,sg2042-dwcmshc
- thead,th1520-dwcmshc
+ - eswin,eic7700-dwcmshc
reg:
maxItems: 1
@@ -52,17 +53,30 @@ properties:
maxItems: 5
reset-names:
- items:
- - const: core
- - const: bus
- - const: axi
- - const: block
- - const: timer
+ maxItems: 5
rockchip,txclk-tapnum:
description: Specify the number of delay for tx sampling.
$ref: /schemas/types.yaml#/definitions/uint8
+ eswin,hsp-sp-csr:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - description: Phandle to HSP(High-Speed Peripheral) device
+ - description: Offset of the stability status register for
+ internal clock
+ - description: Offset of the stability register for host regulator
+ voltage.
+ description: |
+ HSP CSR is to control and get status of different high-speed
+ peripherals (such as Ethernet, USB, SATA, etc.) via register,
+ which can close module's clock, reset module independently
+ and tune board-level's parameters of PHY, etc.
+
+ eswin,drive-impedance-ohms:
+ description: Specifies the drive impedance in Ohm.
+ enum: [33, 40, 50, 66, 100]
+
required:
- compatible
- reg
@@ -110,6 +124,37 @@ allOf:
- const: block
- const: timer
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: eswin,eic7700-dwcmshc
+ then:
+ properties:
+ resets:
+ minItems: 4
+ maxItems: 4
+ reset-names:
+ items:
+ - const: axi
+ - const: phy
+ - const: prstn
+ - const: txrx
+ required:
+ - eswin,hsp-sp-csr
+ - eswin,drive-impedance-ohms
+ else:
+ properties:
+ resets:
+ maxItems: 5
+ reset-names:
+ items:
+ - const: core
+ - const: bus
+ - const: axi
+ - const: block
+ - const: timer
+
- if:
properties:
compatible:
--
2.25.1
Powered by blists - more mailing lists