linux-kernel - Re: [PATCH v5 0/4] Add support for Grinn GenioSBC-510/700 boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <4c974736-f257-42a5-9d39-801a579d9771@kernel.org>
Date: Mon, 13 Oct 2025 11:41:25 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...nel.org>
To: Mateusz Koza <mateusz.koza@...nn-global.com>
Cc: krzk+dt@...nel.org, conor+dt@...nel.org, matthias.bgg@...il.com,
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
 marcin.czarnecki@...nn-global.com, b.bilas@...nn-global.com, andrew@...n.ch,
 robh@...nel.org
Subject: Re: [PATCH v5 0/4] Add support for Grinn GenioSBC-510/700 boards

Il 09/09/25 18:30, Mateusz Koza ha scritto:
> This patch series adds support for Grinn GenioSBC-510 and GenioSBC-700
> boards based on MediaTek MT8370 and MT8390 SoCs, respectively. It
> includes device tree files for both boards, updates to the device tree
> bindings, and necessary modifications to the Makefile.
> 
> As far as I know, <angelogioacchino.delregno@...labora.com> has access
> to the schematics for these boards, as we've shared them under NDA with
> Collabora.
> 
> Signed-off-by: Mateusz Koza <mateusz.koza@...nn-global.com>
> ---
> v2:	Fixed the subject prefixes,
> 	Fixed alignment in dts files,
> 	Added missing SPDX-License-Identifier,
> 	Fixed the ordering in dt-bindings,
> 	Dropped redundant info from commit messages,
> 	Run checkpatch.pl on the patchset and fixed the issues,
> 	as suggested by Krzysztof Kozlowski <krzk@...nel.org>.
> 
> v3:	Changed eth phy-mode to 'rgmii-id',
> 	Changed eth mediatek,tx-delay-ps to 30,
> 	as suggested by Andrew Lunn <andrew@...n.ch>.
> 
> v4:	Removed the nodes that are not present in upstream,
> 	as suggested by Louis-Alexis <angelogioacchino.delregno@...labora.com>.
> 
> 	Added default pinctrl to ssusb0,
> 	Enabled the scp_cluster node,
> 	as suggested by Bartosz Biłas <b.bilas@...nn-global.com>.
> 
> v5:	Did NOT move the chasis-type - Error: Properties must precede subnodes,
> 	Swapped underscores to commas in regulator names,
> 	Reordered properties (generic -> vendor -> status),
> 	Dropped the firmware property from the scp_c0 node,
> 	Added interrupts-extended to the pmic node,
> 	Dropped the mt6359key handle,
> 	Added blank spaces before the memory nodes,
> 	as suggested by AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> ---
> 
> Bartosz Bilas (1):
>    arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn
>      GenioSBC-510
> 
> Mateusz Koza (3):
>    arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
>    dt-bindings: arm: mediatek: Add grinn,genio-700-sbc
>    dt-bindings: arm: mediatek: Add grinn,genio-510-sbc
> 
>   .../devicetree/bindings/arm/mediatek.yaml     |   2 +
>   arch/arm64/boot/dts/mediatek/Makefile         |   2 +
>   .../mediatek/mt8370-grinn-genio-510-sbc.dts   |  20 +
>   .../mediatek/mt8390-grinn-genio-700-sbc.dts   |  20 +
>   .../dts/mediatek/mt8390-grinn-genio-sbc.dtsi  | 538 ++++++++++++++++++
>   .../dts/mediatek/mt8390-grinn-genio-som.dtsi  | 210 +++++++
>   6 files changed, 792 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi
> 

Patches 1, 3 applied to v6.18-next/dts64

Thanks!