lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CANAwSgTXC0uOwZhZ69viUB3t4-jH+XArP8e4vukDb2zrSgOTuA@mail.gmail.com>
Date: Mon, 13 Oct 2025 19:32:59 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Siddharth Vadapalli <s-vadapalli@...com>
Cc: Vignesh Raghavendra <vigneshr@...com>, Lorenzo Pieralisi <lpieralisi@...nel.org>, 
	Krzysztof WilczyƄski <kwilczynski@...nel.org>, 
	Manivannan Sadhasivam <mani@...nel.org>, Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>, 
	"open list:PCI DRIVER FOR TI DRA7XX/J721E" <linux-omap@...r.kernel.org>, 
	"open list:PCI DRIVER FOR TI DRA7XX/J721E" <linux-pci@...r.kernel.org>, 
	"moderated list:PCI DRIVER FOR TI DRA7XX/J721E" <linux-arm-kernel@...ts.infradead.org>, 
	open list <linux-kernel@...r.kernel.org>
Subject: Re: [RFC v1 1/2] PCI: j721e: Use devm_clk_get_optional_enabled() to
 get the clock

Hi Siddharth,

Thanks for your review comment

On Mon, 13 Oct 2025 at 16:43, Siddharth Vadapalli <s-vadapalli@...com> wrote:
>
> On Mon, 2025-10-13 at 15:47 +0530, Anand Moon wrote:
> > Use devm_clk_get_optional_enabled() helper instead of calling
> > devm_clk_get_optional() and then clk_prepare_enable(). It simplifies
> > the error handling and makes the code more compact. This changes removes
> > the unnecessary clk variable and assigns the result of the
> > devm_clk_get_optional_enabled() call directly to pcie->refclk.
> > This makes the code more concise and readable without changing the
> > behavior.
> >
> > Cc: Siddharth Vadapalli <s-vadapalli@...com>
> > Signed-off-by: Anand Moon <linux.amoon@...il.com>
> > ---
> >  drivers/pci/controller/cadence/pci-j721e.c | 12 ++----------
> >  1 file changed, 2 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> > index 5bc5ab20aa6d..d6bbd04c615b 100644
> > --- a/drivers/pci/controller/cadence/pci-j721e.c
> > +++ b/drivers/pci/controller/cadence/pci-j721e.c
> > @@ -479,7 +479,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
> >       struct cdns_pcie_ep *ep = NULL;
> >       struct gpio_desc *gpiod;
> >       void __iomem *base;
> > -     struct clk *clk;
> >       u32 num_lanes;
> >       u32 mode;
> >       int ret;
> > @@ -603,18 +602,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
> >                       goto err_get_sync;
> >               }
> >
> > -             clk = devm_clk_get_optional(dev, "pcie_refclk");
> > -             if (IS_ERR(clk)) {
> > -                     ret = dev_err_probe(dev, PTR_ERR(clk), "failed to get pcie_refclk\n");
> > -                     goto err_pcie_setup;
> > -             }
> > -
> > -             ret = clk_prepare_enable(clk);
> > -             if (ret) {
> > +             pcie->refclk = devm_clk_get_optional_enabled(dev, "pcie_refclk");
> > +             if (IS_ERR(pcie->refclk)) {
> >                       dev_err_probe(dev, ret, "failed to enable pcie_refclk\n");
> >                       goto err_pcie_setup;
>
> 'err_pcie_setup' returns 'ret' which isn't being updated above.
> Maybe add:
>                 ret = pcie->refclk;
> above dev_err_probe(...
All return values from the dev_err_probe function appear to be missing
in this file.
I'll address this in the next revision through a separate patch.
>
> >               }
> > -             pcie->refclk = clk;
> >
> >               /*
> >                * Section 2.2 of the PCI Express Card Electromechanical
>
> Regards,
> Siddharth.

Thanks
-Anand

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ