| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251015232015.846282-1-robh@kernel.org>
Date: Wed, 15 Oct 2025 18:16:24 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Shawn Guo <shawnguo@...nel.org>,
Fabio Estevam <festevam@...il.com>,
Nuno Sá <nuno.sa@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
Andy Shevchenko <andy@...nel.org>,
Jassi Brar <jassisinghbrar@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Lee Jones <lee@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Daire McNamara <daire.mcnamara@...rochip.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kwilczynski@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Florian Fainelli <f.fainelli@...il.com>,
Tony Lindgren <tony@...mide.com>
Cc: devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-iio@...r.kernel.org,
linux-media@...r.kernel.org,
netdev@...r.kernel.org,
linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org
Subject: [PATCH] dt-bindings: Fix inconsistent quoting
yamllint has gained a new check which checks for inconsistent quoting
(mixed " and ' quotes within a file). Fix all the cases yamllint found
so we can enable the check (once the check is in a release). Use
whichever quoting is dominate in the file.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
.../arm/altera/socfpga-clk-manager.yaml | 4 ++--
.../bindings/clock/nvidia,tegra124-car.yaml | 8 ++++----
.../bindings/clock/nvidia,tegra20-car.yaml | 6 +++---
.../devicetree/bindings/gpio/gpio-mxs.yaml | 9 +++++----
.../bindings/gpio/snps,dw-apb-gpio.yaml | 4 ++--
.../bindings/iio/temperature/adi,ltc2983.yaml | 20 +++++++++----------
.../mailbox/qcom,apcs-kpss-global.yaml | 16 +++++++--------
.../mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 2 +-
.../bindings/media/fsl,imx6q-vdoa.yaml | 2 +-
.../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++--
.../devicetree/bindings/mfd/ti,twl.yaml | 4 ++--
.../bindings/net/ethernet-switch.yaml | 2 +-
.../pci/plda,xpressrich3-axi-common.yaml | 2 +-
.../bindings/phy/motorola,cpcap-usb-phy.yaml | 4 ++--
.../pinctrl/microchip,sparx5-sgpio.yaml | 12 +++++------
.../bindings/pinctrl/qcom,pmic-gpio.yaml | 10 +++++-----
.../bindings/pinctrl/qcom,pmic-mpp.yaml | 6 +++---
.../bindings/pinctrl/renesas,pfc.yaml | 4 ++--
.../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +-
.../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +-
.../pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +-
.../bindings/power/renesas,sysc-rmobile.yaml | 4 ++--
.../soc/microchip/atmel,at91rm9200-tcb.yaml | 8 ++++----
.../soc/tegra/nvidia,tegra20-pmc.yaml | 12 +++++------
24 files changed, 75 insertions(+), 74 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index a758f4bb2bb3..275554bfedce 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -39,7 +39,7 @@ properties:
"^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$":
type: object
- $ref: '#/$defs/clock-props'
+ $ref: "#/$defs/clock-props"
unevaluatedProperties: false
properties:
@@ -67,7 +67,7 @@ properties:
patternProperties:
"^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$":
type: object
- $ref: '#/$defs/clock-props'
+ $ref: "#/$defs/clock-props"
unevaluatedProperties: false
properties:
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
index a9ba21144a56..13bb616249a1 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -37,7 +37,7 @@ properties:
'#clock-cells':
const: 1
- "#reset-cells":
+ '#reset-cells':
const: 1
nvidia,external-memory-controller:
@@ -46,7 +46,7 @@ properties:
phandle of the external memory controller node
patternProperties:
- "^emc-timings-[0-9]+$":
+ '^emc-timings-[0-9]+$':
type: object
properties:
nvidia,ram-code:
@@ -56,7 +56,7 @@ patternProperties:
this timing set is used for
patternProperties:
- "^timing-[0-9]+$":
+ '^timing-[0-9]+$':
type: object
properties:
clock-frequency:
@@ -94,7 +94,7 @@ required:
- compatible
- reg
- '#clock-cells'
- - "#reset-cells"
+ - '#reset-cells'
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
index bee2dd4b29bf..73cccc0df424 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -39,11 +39,11 @@ properties:
'#clock-cells':
const: 1
- "#reset-cells":
+ '#reset-cells':
const: 1
patternProperties:
- "^(sclk)|(pll-[cem])$":
+ '^(sclk)|(pll-[cem])$':
type: object
properties:
compatible:
@@ -76,7 +76,7 @@ required:
- compatible
- reg
- '#clock-cells'
- - "#reset-cells"
+ - '#reset-cells'
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
index aaf97124803f..4b5b8e794613 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -26,9 +26,10 @@ properties:
# Devices. Keep it as it to be compatible existed dts files.
- const: simple-bus
- '#address-cells':
+ "#address-cells":
const: 1
- '#size-cells':
+
+ "#size-cells":
const: 0
reg:
@@ -132,8 +133,8 @@ patternProperties:
required:
- compatible
- reg
- - '#address-cells'
- - '#size-cells'
+ - "#address-cells"
+ - "#size-cells"
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
index ab2afc0e4153..bba6f5b6606f 100644
--- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -111,8 +111,8 @@ additionalProperties: false
required:
- compatible
- reg
- - "#address-cells"
- - "#size-cells"
+ - '#address-cells'
+ - '#size-cells'
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 312febeeb3bb..ee0b558bb866 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -88,7 +88,7 @@ properties:
const: 0
patternProperties:
- "^thermocouple@":
+ '^thermocouple@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
@@ -146,7 +146,7 @@ patternProperties:
required:
- adi,custom-thermocouple
- "^diode@":
+ '^diode@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
@@ -191,7 +191,7 @@ patternProperties:
$ref: /schemas/types.yaml#/definitions/uint32
default: 0
- "^rtd@":
+ '^rtd@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
description: RTD sensor.
@@ -280,7 +280,7 @@ patternProperties:
type: boolean
dependencies:
- adi,current-rotate: [ "adi,rsense-share" ]
+ adi,current-rotate: [ 'adi,rsense-share' ]
- if:
properties:
@@ -290,7 +290,7 @@ patternProperties:
required:
- adi,custom-rtd
- "^thermistor@":
+ '^thermistor@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
description: Thermistor sensor.
@@ -364,7 +364,7 @@ patternProperties:
- adi,rsense-handle
dependencies:
- adi,current-rotate: [ "adi,rsense-share" ]
+ adi,current-rotate: [ 'adi,rsense-share' ]
allOf:
- if:
@@ -392,7 +392,7 @@ patternProperties:
required:
- adi,custom-thermistor
- "^adc@":
+ '^adc@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
description: Direct ADC sensor.
@@ -407,7 +407,7 @@ patternProperties:
description: Whether the sensor is single-ended.
type: boolean
- "^temp@":
+ '^temp@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
description: Active analog temperature sensor.
@@ -437,7 +437,7 @@ patternProperties:
required:
- adi,custom-temp
- "^rsense@":
+ '^rsense@':
$ref: '#/$defs/sensor-node'
unevaluatedProperties: false
description: Sense resistor sensor.
@@ -476,7 +476,7 @@ allOf:
- adi,ltc2984
then:
patternProperties:
- "^temp@": false
+ '^temp@': false
examples:
- |
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 615ed103b7e6..f40dc9048327 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -187,10 +187,10 @@ allOf:
enum:
- qcom,msm8916-apcs-kpss-global
then:
- $ref: "#/$defs/msm8916-apcs-clock-controller"
+ $ref: '#/$defs/msm8916-apcs-clock-controller'
properties:
clock-controller:
- $ref: "#/$defs/msm8916-apcs-clock-controller"
+ $ref: '#/$defs/msm8916-apcs-clock-controller'
- if:
properties:
@@ -199,10 +199,10 @@ allOf:
enum:
- qcom,msm8939-apcs-kpss-global
then:
- $ref: "#/$defs/msm8939-apcs-clock-controller"
+ $ref: '#/$defs/msm8939-apcs-clock-controller'
properties:
clock-controller:
- $ref: "#/$defs/msm8939-apcs-clock-controller"
+ $ref: '#/$defs/msm8939-apcs-clock-controller'
- if:
properties:
@@ -211,10 +211,10 @@ allOf:
enum:
- qcom,sdx55-apcs-gcc
then:
- $ref: "#/$defs/sdx55-apcs-clock-controller"
+ $ref: '#/$defs/sdx55-apcs-clock-controller'
properties:
clock-controller:
- $ref: "#/$defs/sdx55-apcs-clock-controller"
+ $ref: '#/$defs/sdx55-apcs-clock-controller'
- if:
properties:
@@ -223,10 +223,10 @@ allOf:
enum:
- qcom,ipq6018-apcs-apps-global
then:
- $ref: "#/$defs/ipq6018-apcs-clock-controller"
+ $ref: '#/$defs/ipq6018-apcs-clock-controller'
properties:
clock-controller:
- $ref: "#/$defs/ipq6018-apcs-clock-controller"
+ $ref: '#/$defs/ipq6018-apcs-clock-controller'
- if:
properties:
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
index fe83b5cb1278..04d6473d666f 100644
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -142,7 +142,7 @@ patternProperties:
- compatible
- reg
- reg-names
- - "#mbox-cells"
+ - '#mbox-cells'
- xlnx,ipi-id
required:
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
index 511ac0d67a7f..988a5b3a62bd 100644
--- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
+++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
@@ -16,7 +16,7 @@ maintainers:
properties:
compatible:
- const: "fsl,imx6q-vdoa"
+ const: fsl,imx6q-vdoa
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
index f329223cec07..0adfeef149e7 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -111,12 +111,12 @@ patternProperties:
reg:
maxItems: 1
- '#reset-cells':
+ "#reset-cells":
const: 1
required:
- compatible
- - '#reset-cells'
+ - "#reset-cells"
"^lpc-snoop@[0-9a-f]+$":
type: object
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index 776b04e182cb..1611b1581a8e 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -400,7 +400,7 @@ properties:
- '#pwm-cells'
patternProperties:
- "^regulator-":
+ '^regulator-':
type: object
unevaluatedProperties: false
$ref: /schemas/regulator/regulator.yaml
@@ -429,7 +429,7 @@ required:
- reg
- interrupts
- interrupt-controller
- - "#interrupt-cells"
+ - '#interrupt-cells'
examples:
- |
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
index b3b7e1a1b127..03001ba40e0f 100644
--- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -72,7 +72,7 @@ additionalProperties: true
$defs:
ethernet-ports:
description: An ethernet switch without any extra port properties
- $ref: '#'
+ $ref: "#"
patternProperties:
"^(ethernet-)?ports$":
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
index 039eecdbd6aa..fe2e8beb5bab 100644
--- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
@@ -72,7 +72,7 @@ required:
- reg-names
- interrupts
- msi-controller
- - "#interrupt-cells"
+ - '#interrupt-cells'
- interrupt-map-mask
- interrupt-map
diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
index 0febd04a61f4..dd345cbd0a0b 100644
--- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
@@ -67,8 +67,8 @@ properties:
mode-gpios:
description: Optional GPIOs for configuring alternate modes
items:
- - description: "mode selection GPIO #0"
- - description: "mode selection GPIO #1"
+ - description: mode selection GPIO#0
+ - description: mode selection GPIO#1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index 0df4e114fdd6..fa47732d7cef 100644
--- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -18,7 +18,7 @@ description: |
properties:
$nodename:
- pattern: "^gpio@[0-9a-f]+$"
+ pattern: '^gpio@[0-9a-f]+$'
compatible:
enum:
@@ -26,10 +26,10 @@ properties:
- mscc,ocelot-sgpio
- mscc,luton-sgpio
- "#address-cells":
+ '#address-cells':
const: 1
- "#size-cells":
+ '#size-cells':
const: 0
reg:
@@ -76,7 +76,7 @@ properties:
- const: switch
patternProperties:
- "^gpio@[0-1]$":
+ '^gpio@[0-1]$':
type: object
properties:
compatible:
@@ -132,8 +132,8 @@ required:
- reg
- clocks
- microchip,sgpio-port-ranges
- - "#address-cells"
- - "#size-cells"
+ - '#address-cells'
+ - '#size-cells'
examples:
- |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 5e6dfcc3fe9b..6632bcd037ba 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -424,13 +424,13 @@ allOf:
patternProperties:
'-state$':
oneOf:
- - $ref: "#/$defs/qcom-pmic-gpio-state"
+ - $ref: '#/$defs/qcom-pmic-gpio-state'
- patternProperties:
- "(pinconf|-pins)$":
- $ref: "#/$defs/qcom-pmic-gpio-state"
+ '(pinconf|-pins)$':
+ $ref: '#/$defs/qcom-pmic-gpio-state'
additionalProperties: false
- "-hog(-[0-9]+)?$":
+ '-hog(-[0-9]+)?$':
type: object
required:
- gpio-hog
@@ -503,7 +503,7 @@ $defs:
- gpio1-gpio12 for pmxr2230
items:
- pattern: "^gpio([0-9]+)$"
+ pattern: '^gpio([0-9]+)$'
function:
items:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 9364ae05f3e6..daf4c1c03712 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -74,10 +74,10 @@ required:
patternProperties:
'-state$':
oneOf:
- - $ref: "#/$defs/qcom-pmic-mpp-state"
+ - $ref: '#/$defs/qcom-pmic-mpp-state'
- patternProperties:
'-pins$':
- $ref: "#/$defs/qcom-pmic-mpp-state"
+ $ref: '#/$defs/qcom-pmic-mpp-state'
additionalProperties: false
$defs:
@@ -100,7 +100,7 @@ $defs:
- mpp1-mpp4 for pma8084
items:
- pattern: "^mpp([0-9]+)$"
+ pattern: '^mpp([0-9]+)$'
function:
items:
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
index cfe004573366..ab1cfe9dcde5 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -129,7 +129,7 @@ additionalProperties:
- type: object
additionalProperties:
- $ref: "#/additionalProperties/anyOf/0"
+ $ref: '#/additionalProperties/anyOf/0'
examples:
- |
@@ -190,7 +190,7 @@ examples:
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
- function = "sdhi0";
+ function = "sdhi0';
power-source = <3300>;
};
};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
index 2bd7d47d0fdb..737eb4e14090 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -118,7 +118,7 @@ additionalProperties:
- type: object
additionalProperties:
- $ref: "#/additionalProperties/anyOf/0"
+ $ref: '#/additionalProperties/anyOf/0'
examples:
- |
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 5156d54b240b..00c05243b9a4 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -135,7 +135,7 @@ additionalProperties:
- type: object
additionalProperties:
- $ref: "#/additionalProperties/anyOf/0"
+ $ref: '#/additionalProperties/anyOf/0'
allOf:
- $ref: pinctrl.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
index 5fa5d31f8866..88b2fa5e684d 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -88,7 +88,7 @@ additionalProperties:
- type: object
additionalProperties:
- $ref: "#/additionalProperties/anyOf/0"
+ $ref: '#/additionalProperties/anyOf/0'
allOf:
- $ref: pinctrl.yaml#
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
index fba6914ec40d..948a9da111df 100644
--- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
@@ -45,7 +45,7 @@ properties:
const: 0
additionalProperties:
- $ref: "#/$defs/pd-node"
+ $ref: '#/$defs/pd-node'
required:
- compatible
@@ -83,7 +83,7 @@ $defs:
- '#power-domain-cells'
additionalProperties:
- $ref: "#/$defs/pd-node"
+ $ref: '#/$defs/pd-node'
examples:
- |
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
index 2c7275c4503b..abf1adca0773 100644
--- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -57,7 +57,7 @@ properties:
const: 0
patternProperties:
- "^timer@[0-2]$":
+ '^timer@[0-2]$':
description: The timer block channels that are used as timers or counters.
type: object
additionalProperties: false
@@ -80,7 +80,7 @@ patternProperties:
- compatible
- reg
- "^pwm@[0-2]$":
+ '^pwm@[0-2]$':
description: The timer block channels that are used as PWMs.
$ref: /schemas/pwm/pwm.yaml#
type: object
@@ -92,7 +92,7 @@ patternProperties:
TCB channel to use for this PWM.
enum: [ 0, 1, 2 ]
- "#pwm-cells":
+ '#pwm-cells':
description:
The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -101,7 +101,7 @@ patternProperties:
required:
- compatible
- reg
- - "#pwm-cells"
+ - '#pwm-cells'
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
index 7140c312d898..f516960dbbef 100644
--- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
@@ -133,12 +133,12 @@ properties:
property. The supported-hw is a bitfield indicating SoC speedo or
process ID mask.
- "#power-domain-cells":
+ '#power-domain-cells':
const: 0
required:
- operating-points-v2
- - "#power-domain-cells"
+ - '#power-domain-cells'
i2c-thermtrip:
type: object
@@ -220,7 +220,7 @@ properties:
xusbc USB Partition C Tegra114/124/210
patternProperties:
- "^[a-z0-9]+$":
+ '^[a-z0-9]+$':
type: object
additionalProperties: false
properties:
@@ -365,9 +365,9 @@ allOf:
additionalProperties: false
dependencies:
- nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
- nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
- nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
+ nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time']
+ nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time']
+ nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time']
examples:
- |
--
2.51.0
Powered by blists - more mailing lists