| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3a1f8a96421d4db0eeeed0460b9fdfb57643b137.camel@ew.tq-group.com>
Date: Wed, 15 Oct 2025 13:11:39 +0200
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Lee Jones <lee@...nel.org>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
linux@...tq-group.com, Andi Shyti <andi.shyti@...nel.org>
Subject: Re: [PATCH 2/4] mfd: tqmx86: refactor I2C setup
On Wed, 2025-10-15 at 13:03 +0200, Matthias Schiffer wrote:
> Preparation for supporting the second I2C controller, and detecting both
> ocores and machxo2 controllers.
>
> - Avoid the confusing "soft" I2C controller term - just call it the
> ocores I2C
> - All non-const parts of the MFD cell are moved from global variables
> into new functions tqmx86_setup_i2c_ocores() and tqmx86_setup_i2c()
> - Define TQMX86_REG_I2C_DETECT relative to I2C base register
>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
Ah, Lee Jones was missing in the recipients of this series for the MFD parts...
going to resend tomorrow.
Best,
Matthias
> ---
> drivers/mfd/tqmx86.c | 130 ++++++++++++++++++++++++-------------------
> 1 file changed, 74 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
> index 1cba3b67b0fb9..3c6f158bf1a45 100644
> --- a/drivers/mfd/tqmx86.c
> +++ b/drivers/mfd/tqmx86.c
> @@ -18,7 +18,7 @@
>
> #define TQMX86_IOBASE 0x180
> #define TQMX86_IOSIZE 0x20
> -#define TQMX86_IOBASE_I2C 0x1a0
> +#define TQMX86_IOBASE_I2C1 0x1a0
> #define TQMX86_IOSIZE_I2C 0xa
> #define TQMX86_IOBASE_WATCHDOG 0x18b
> #define TQMX86_IOSIZE_WATCHDOG 0x2
> @@ -54,8 +54,8 @@
> #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT 4
> #define TQMX86_REG_SAUC 0x17
>
> -#define TQMX86_REG_I2C_DETECT 0x1a7
> -#define TQMX86_REG_I2C_DETECT_SOFT 0xa5
> +#define TQMX86_REG_I2C_DETECT 0x7
> +#define TQMX86_REG_I2C_DETECT_OCORES 0xa5
>
> static uint gpio_irq;
> module_param(gpio_irq, uint, 0);
> @@ -65,17 +65,6 @@ static uint i2c1_irq;
> module_param(i2c1_irq, uint, 0);
> MODULE_PARM_DESC(i2c1_irq, "I2C1 IRQ number (valid parameters: 7, 9, 12)");
>
> -enum tqmx86_i2c1_resource_type {
> - TQMX86_I2C1_IO,
> - TQMX86_I2C1_IRQ,
> -};
> -
> -static struct resource tqmx_i2c_soft_resources[] = {
> - [TQMX86_I2C1_IO] = DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C),
> - /* Placeholder for IRQ resource */
> - [TQMX86_I2C1_IRQ] = {},
> -};
> -
> static const struct resource tqmx_watchdog_resources[] = {
> DEFINE_RES_IO(TQMX86_IOBASE_WATCHDOG, TQMX86_IOSIZE_WATCHDOG),
> };
> @@ -91,28 +80,13 @@ static struct resource tqmx_gpio_resources[] = {
> [TQMX86_GPIO_IRQ] = {},
> };
>
> -static struct i2c_board_info tqmx86_i2c_devices[] = {
> +static const struct i2c_board_info tqmx86_i2c1_devices[] = {
> {
> /* 4K EEPROM at 0x50 */
> I2C_BOARD_INFO("24c32", 0x50),
> },
> };
>
> -static struct ocores_i2c_platform_data ocores_platform_data = {
> - .num_devices = ARRAY_SIZE(tqmx86_i2c_devices),
> - .devices = tqmx86_i2c_devices,
> -};
> -
> -static const struct mfd_cell tqmx86_i2c_soft_dev[] = {
> - {
> - .name = "ocores-i2c",
> - .platform_data = &ocores_platform_data,
> - .pdata_size = sizeof(ocores_platform_data),
> - .resources = tqmx_i2c_soft_resources,
> - .num_resources = ARRAY_SIZE(tqmx_i2c_soft_resources),
> - },
> -};
> -
> static const struct mfd_cell tqmx86_devs[] = {
> {
> .name = "tqmx86-wdt",
> @@ -238,13 +212,74 @@ static int tqmx86_setup_irq(struct device *dev, const char *label, u8 irq,
> return 0;
> }
>
> +static int tqmx86_setup_i2c(struct device *dev, const char *name,
> + unsigned long i2c_base, const void *platform_data,
> + size_t pdata_size, u8 irq)
> +{
> + const struct resource resources[] = {
> + DEFINE_RES_IO(i2c_base, TQMX86_IOSIZE_I2C),
> + irq ? DEFINE_RES_IRQ(irq) : (struct resource) {},
> + };
> + const struct mfd_cell i2c_dev = {
> + .name = name,
> + .platform_data = platform_data,
> + .pdata_size = pdata_size,
> + .resources = resources,
> + .num_resources = ARRAY_SIZE(resources),
> + };
> +
> + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, &i2c_dev, 1,
> + NULL, 0, NULL);
> +
> +}
> +
> +static int tqmx86_setup_i2c_ocores(struct device *dev, const char *label,
> + unsigned long i2c_base, int clock_khz, u8 irq,
> + const struct i2c_board_info *devices,
> + size_t num_devices)
> +{
> + const struct ocores_i2c_platform_data platform_data = {
> + .clock_khz = clock_khz,
> + .num_devices = num_devices,
> + .devices = devices,
> + };
> +
> + return tqmx86_setup_i2c(dev, "ocores-i2c", i2c_base, &platform_data,
> + sizeof(platform_data), irq);
> +}
> +
> +static int tqmx86_detect_i2c(struct device *dev, const char *label,
> + unsigned long i2c_base, int clock_khz, u8 irq,
> + const struct i2c_board_info *devices,
> + size_t num_devices, void __iomem *io_base,
> + u8 irq_reg_shift)
> +{
> + u8 i2c_det;
> +
> + if (tqmx86_setup_irq(dev, label, irq, io_base, irq_reg_shift))
> + irq = 0;
> +
> + /*
> + * The I2C_DETECT register is in the range assigned to the I2C driver
> + * later, so we don't extend TQMX86_IOSIZE. Use inb() for this one-off
> + * access instead of ioport_map + unmap.
> + */
> + i2c_det = inb(i2c_base + TQMX86_REG_I2C_DETECT);
> +
> + if (i2c_det == TQMX86_REG_I2C_DETECT_OCORES)
> + return tqmx86_setup_i2c_ocores(dev, label, i2c_base, clock_khz,
> + irq, devices, num_devices);
> +
> + return 0;
> +}
> +
> static int tqmx86_probe(struct platform_device *pdev)
> {
> - u8 board_id, sauc, rev, i2c_det;
> + u8 board_id, sauc, rev;
> struct device *dev = &pdev->dev;
> const char *board_name;
> void __iomem *io_base;
> - int err;
> + int err, clock_khz;
>
> io_base = devm_ioport_map(dev, TQMX86_IOBASE, TQMX86_IOSIZE);
> if (!io_base)
> @@ -259,13 +294,6 @@ static int tqmx86_probe(struct platform_device *pdev)
> "Found %s - Board ID %d, PCB Revision %d, PLD Revision %d\n",
> board_name, board_id, rev >> 4, rev & 0xf);
>
> - /*
> - * The I2C_DETECT register is in the range assigned to the I2C driver
> - * later, so we don't extend TQMX86_IOSIZE. Use inb() for this one-off
> - * access instead of ioport_map + unmap.
> - */
> - i2c_det = inb(TQMX86_REG_I2C_DETECT);
> -
> if (gpio_irq) {
> err = tqmx86_setup_irq(dev, "GPIO", gpio_irq, io_base,
> TQMX86_REG_IO_EXT_INT_GPIO_SHIFT);
> @@ -273,23 +301,13 @@ static int tqmx86_probe(struct platform_device *pdev)
> tqmx_gpio_resources[TQMX86_GPIO_IRQ] = DEFINE_RES_IRQ(gpio_irq);
> }
>
> - ocores_platform_data.clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
> -
> - if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
> - if (i2c1_irq) {
> - err = tqmx86_setup_irq(dev, "I2C1", i2c1_irq, io_base,
> - TQMX86_REG_IO_EXT_INT_I2C1_SHIFT);
> - if (!err)
> - tqmx_i2c_soft_resources[TQMX86_I2C1_IRQ] = DEFINE_RES_IRQ(i2c1_irq);
> - }
> -
> - err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> - tqmx86_i2c_soft_dev,
> - ARRAY_SIZE(tqmx86_i2c_soft_dev),
> - NULL, 0, NULL);
> - if (err)
> - return err;
> - }
> + clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
> +
> + err = tqmx86_detect_i2c(dev, "I2C1", TQMX86_IOBASE_I2C1, clock_khz, i2c1_irq,
> + tqmx86_i2c1_devices, ARRAY_SIZE(tqmx86_i2c1_devices),
> + io_base, TQMX86_REG_IO_EXT_INT_I2C1_SHIFT);
> + if (err)
> + return err;
>
> return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> tqmx86_devs,
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/
Powered by blists - more mailing lists