[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <tv7zufiknf6ecnvefksgdborg4csqxyndb577crt3mzwzcxley@zlschj2txmzi>
Date: Fri, 17 Oct 2025 14:41:04 -0700
From: Bjorn Andersson <andersson@...nel.org>
To: Taniya Das <quic_tdas@...cinc.com>
Cc: Krzysztof Kozlowski <krzk@...nel.org>,
Taniya Das <taniya.das@....qualcomm.com>, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Ajit Pandey <ajit.pandey@....qualcomm.com>,
Imran Shaik <imran.shaik@....qualcomm.com>, Jagadeesh Kona <jagadeesh.kona@....qualcomm.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: defconfig: Change CONFIG_SM_TCSRCC_8750 from m to
y
On Fri, Oct 17, 2025 at 11:19:51AM +0530, Taniya Das wrote:
>
>
> On 10/17/2025 10:51 AM, Krzysztof Kozlowski wrote:
> > On 17/10/2025 07:16, Taniya Das wrote:
> >>
> >>
> >> On 10/17/2025 10:00 AM, Krzysztof Kozlowski wrote:
> >>> On 16/10/2025 20:53, Taniya Das wrote:
> >>>> The TCSR clock controller is required during boot to provide the ref
> >>>> clocks to the UFS controller. Setting CONFIG_SM_TCSRCC_8750 to y ensures
> >>>> the UFS driver successfully probe and initialize the device.
> >>>>
> >>>> Without this change, the UFS subsystem fails to mount as a usable file
> >>>> system during boot.
> >>>
> >>>
> >>> That's not what I observed. UFS works fine, especially that it is a
> >>> module, so no, this is not a desired change and explanation is not only
> >>> insufficient but actually incorrect.
> >>>
> >>
> >> Krzysztof, on Pakala MTP we are observing the below issue and it
> >> requires the module of tscrcc to be loaded explicitly. This patch also
> >> aligns to how it is on all other targets.
> >>
> >> /soc@...hy@...0000: Failed to get clk index: 2 ret: -517
> >> [ 10.496570] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
> >> [ 10.503660] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
> >> find vdd-hba-supply regulator, assuming enabled
> >> [ 10.514548] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
> >> find vccq2-supply regulator, assuming enabled
> >> [ 10.565955] platform 1d80000.phy: deferred probe pending: (reason
> >> unknown)
> >> [ 10.573078] platform 1d84000.ufs: deferred probe pending:
> >> ufshcd-qcom: ufshcd_pltfrm_init() failed
> >>
> >
> >
> > I don't and I am testing regularly, so I assume you have incorrect
> > config. Maybe I have incorrect one (which works), but then commit msg is
> > incomplete - you must explain the bug and provide proof that this is the
> > correct fix for it.
> >
>
> We have tried booting up recently and and that is what we observed. The
> patch from 'm' to 'y' helps the UFS probe is successful and the rootfs
> is picked from ufs partitions. I will add these fail & success log
> snippets in the commit text.
Please don't, there's nothing useful in either log, so dumping them in
the git history will serve no purpose.
Regards,
Bjorn
>
> [ 0.000000] Machine model: Qualcomm Technologies, Inc. SM8750 MTP
> ....
> [ 3.133373] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
> [ 3.144480] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
> find vdd-hba-supply regulator, assuming enabled
> [ 3.144585] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
> find vccq2-supply regulator, assuming enabled
> [ 3.227770] ufshcd-qcom 1d84000.ufs: Resource ufs_mem not provided
> [ 3.238319] ufshcd-qcom 1d84000.ufs: MCQ mode is disabled, err=-19
> [ 3.244707] scsi host0: ufshcd
> [ 3.255170] scsi 0:0:0:49488: Well-known LUN KIOXIA
> THGJFLT2E46BATPB 0100 PQ: 0 ANSI: 6
> [ 3.272001] scsi 0:0:0:49476: Well-known LUN KIOXIA
> THGJFLT2E46BATPB 0100 PQ: 0 ANSI: 6
> [ 3.287011] scsi 0:0:0:49456: Well-known LUN KIOXIA
> THGJFLT2E46BATPB 0100 PQ: 0 ANSI: 6
> [ 3.304264] scsi 0:0:0:0: Direct-Access KIOXIA THGJFLT2E46BATPB
> 0100 PQ: 0 ANSI: 6
> [ 3.331545] sd 0:0:0:0: [sda] 121774080 4096-byte logical blocks:
> (499 GB/465 GiB)
>
>
> Thanks,
> Taniya.
>
Powered by blists - more mailing lists