[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f6812244-8e8e-45b9-87b9-fe96d740a843@kernel.org>
Date: Mon, 20 Oct 2025 11:58:06 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Tudor Ambarus <tudor.ambarus@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Peter Griffin <peter.griffin@...aro.org>,
André Draszik <andre.draszik@...aro.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Alim Akhtar <alim.akhtar@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, willmcvicker@...gle.com, kernel-team@...roid.com
Subject: Re: [PATCH v6 4/6] clk: samsung: add Exynos ACPM clock driver
On 20/10/2025 11:19, Tudor Ambarus wrote:
>
>
> On 10/20/25 9:22 AM, Krzysztof Kozlowski wrote:
>> On 20/10/2025 09:45, Tudor Ambarus wrote:
>>>
>>>
>>> On 10/20/25 7:54 AM, Krzysztof Kozlowski wrote:
>>>>> diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
>>>>> index 76a494e95027af26272e30876a87ac293bd56dfa..70a8b82a0136b4d0213d8ff95e029c52436e5c7f 100644
>>>>> --- a/drivers/clk/samsung/Kconfig
>>>>> +++ b/drivers/clk/samsung/Kconfig
>>>>> @@ -95,6 +95,16 @@ config EXYNOS_CLKOUT
>>>>> status of the certains clocks from SoC, but it could also be tied to
>>>>> other devices as an input clock.
>>>>>
>>>>> +config EXYNOS_ACPM_CLK
>>>>> + tristate "Clock driver controlled via ACPM interface"
>>>>> + depends on EXYNOS_ACPM_PROTOCOL || (COMPILE_TEST && !EXYNOS_ACPM_PROTOCOL)
>>>>
>>>> I merged the patches but I don't get why we are not enabling it by
>>>> default, just like every other clock driver. What is so special here?
>>>
>>> Thanks! Are you referring to the depends on line? I needed it otherwise
>>> on randconfigs where COMPILE_TEST=y and EXYNOS_ACPM_PROTOCOL=n I get:
>>
>>
>> No. I am referring to missing default and defconfig patch.
>>
>
> default m or y would force compilation of EXYNOS_ACPM_CLK and
> EXYNOS_ACPM_PROTOCOL for all ARCH_EXYNOS, even on Exynos platforms that
> don't use ACPM. Since ACPM is not universally required by the Exynos
> architecture, I thought to make it opt-in (default n).
Just like every clock driver. So again - how is it different?
>
> Setting it as a module in arm64 defconfig makes it available on
> compatible platforms.
>
> Similar clock drivers do the same: CLK_RASPBERRYPI.
> COMMON_CLK_SCPI, COMMON_CLK_SCMI - no defaults and set them as builtin
> in the arm64 defconfig.
I am speaking about Samsung drivers.
Best regards,
Krzysztof
Powered by blists - more mailing lists