| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251022-a5-pinctrl-node-v4-1-a71911852c4b@amlogic.com>
Date: Wed, 22 Oct 2025 13:04:48 +0800
From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>, Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-amlogic@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Xianwei Zhao <xianwei.zhao@...ogic.com>
Subject: [PATCH v4] dts: arm64: amlogic: add a5 pinctrl node
From: Xianwei Zhao <xianwei.zhao@...ogic.com>
Add pinctrl device to support Amlogic A5.
Signed-off-by: Xianwei Zhao <xianwei.zhao@...ogic.com>
---
Add A5 pinctrl compatible string and device node.
---
Changes in v4:
- Rebase dts.
- Binding has already be accepted. This submission does not include this part.
- Link to v3: https://lore.kernel.org/all/20250403-a5-pinctrl-v3-0-a8c067e22295@amlogic.com
Changes in v3:
- Remain blank line.
- Link to v2: https://lore.kernel.org/r/20250401-a5-pinctrl-v2-0-a136c1058379@amlogic.com
Changes in v2:
- Modify bindings according to Conor's suggestion.
- Link to v1: https://lore.kernel.org/r/20250327-a5-pinctrl-v1-0-49320349c463@amlogic.com
---
arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi | 90 +++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
index b1da8cbaa25a..2b12d8284594 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -5,6 +5,7 @@
#include "amlogic-a4-common.dtsi"
#include "amlogic-a5-reset.h"
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
#include <dt-bindings/power/amlogic,a5-pwrc.h>
/ {
cpus {
@@ -58,6 +59,95 @@ reset: reset-controller@...0 {
#reset-cells = <1>;
};
+ periphs_pinctrl: pinctrl@...0 {
+ compatible = "amlogic,pinctrl-a5",
+ "amlogic,pinctrl-a4";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x4000 0x0 0x300>;
+
+ gpioz: gpio@c0 {
+ reg = <0x0 0xc0 0x0 0x40>,
+ <0x0 0x18 0x0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+ };
+
+ gpiox: gpio@100 {
+ reg = <0x0 0x100 0x0 0x40>,
+ <0x0 0xc 0x0 0xc>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+ };
+
+ gpiot: gpio@140 {
+ reg = <0x0 0x140 0x0 0x40>,
+ <0x0 0x2c 0x0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 14>;
+ };
+
+ gpiod: gpio@180 {
+ reg = <0x0 0x180 0x0 0x40>,
+ <0x0 0x40 0x0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+ };
+
+ gpioe: gpio@1c0 {
+ reg = <0x0 0x1c0 0x0 0x40>,
+ <0x0 0x48 0x0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+ };
+
+ gpioc: gpio@200 {
+ reg = <0x0 0x200 0x0 0x40>,
+ <0x0 0x24 0x0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 11>;
+ };
+
+ gpiob: gpio@240 {
+ reg = <0x0 0x240 0x0 0x40>,
+ <0x0 0x0 0x0 0x8>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+ };
+
+ gpioh: gpio@280 {
+ reg = <0x0 0x280 0x0 0x40>,
+ <0x0 0x4c 0x0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 5>;
+ };
+
+ gpio_test_n: gpio@2c0 {
+ reg = <0x0 0x2c0 0x0 0x40>,
+ <0x0 0x3c 0x0 0x4>;
+ reg-names = "gpio", "mux";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+ };
+ };
+
gpio_intc: interrupt-controller@...0 {
compatible = "amlogic,a5-gpio-intc",
"amlogic,meson-gpio-intc";
---
base-commit: ea528a07aae07a764babc0d92db55e2c0d68d414
change-id: 20251022-a5-pinctrl-node-89d647ba2916
Best regards,
--
Xianwei Zhao <xianwei.zhao@...ogic.com>
Powered by blists - more mailing lists