[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20251024222239.GA2902515-robh@kernel.org>
Date: Fri, 24 Oct 2025 17:22:39 -0500
From: Rob Herring <robh@...nel.org>
To: Conor Dooley <conor@...nel.org>
Cc: Ulf Hansson <ulf.hansson@...aro.org>, hehuan1@...incomputing.com,
krzk+dt@...nel.org, conor+dt@...nel.org, jszhang@...nel.org,
adrian.hunter@...el.com, p.zabel@...gutronix.de,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ningyu@...incomputing.com,
linmin@...incomputing.com, pinkesh.vaghela@...fochips.com,
xuxiang@...incomputing.com, luyulin@...incomputing.com,
dongxuyang@...incomputing.com, zhangsenchuan@...incomputing.com,
weishangjuan@...incomputing.com, lizhi2@...incomputing.com,
caohang@...incomputing.com,
Conor Dooley <conor.dooley@...rochip.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin
EIC7700
On Fri, Oct 24, 2025 at 10:47:34PM +0100, Conor Dooley wrote:
> On Fri, Oct 24, 2025 at 05:37:59PM +0100, Conor Dooley wrote:
> > On Fri, Oct 24, 2025 at 03:57:33PM +0200, Ulf Hansson wrote:
> > > On Sun, 19 Oct 2025 at 13:52, <hehuan1@...incomputing.com> wrote:
> > > >
> > > > From: Huan He <hehuan1@...incomputing.com>
> > > >
> > > > EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
> > > > Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.
> > > >
> > > > Signed-off-by: Huan He <hehuan1@...incomputing.com>
> > > > Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
> > > > ---
> > > > .../bindings/mmc/snps,dwcmshc-sdhci.yaml | 57 +++++++++++++++++--
> > > > 1 file changed, 51 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> > > > index f882219a0a26..7e7c55dc2440 100644
> > > > --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> > > > +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> > > > @@ -30,6 +30,7 @@ properties:
> > > > - sophgo,sg2002-dwcmshc
> > > > - sophgo,sg2042-dwcmshc
> > > > - thead,th1520-dwcmshc
> > > > + - eswin,eic7700-dwcmshc
> > > >
> > > > reg:
> > > > maxItems: 1
> > > > @@ -52,17 +53,30 @@ properties:
> > > > maxItems: 5
> > > >
> > > > reset-names:
> > > > - items:
> > > > - - const: core
> > > > - - const: bus
> > > > - - const: axi
> > > > - - const: block
> > > > - - const: timer
> > > > + maxItems: 5
> > > >
> > > > rockchip,txclk-tapnum:
> > > > description: Specify the number of delay for tx sampling.
> > > > $ref: /schemas/types.yaml#/definitions/uint8
> > > >
> > > > + eswin,hsp-sp-csr:
> > > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > > + items:
> > > > + - items:
> > > > + - description: Phandle to HSP(High-Speed Peripheral) device
> > > > + - description: Offset of the stability status register for internal
> > > > + clock.
> > > > + - description: Offset of the stability register for host regulator
> > > > + voltage.
> > > > + description:
> > > > + HSP CSR is to control and get status of different high-speed peripherals
> > > > + (such as Ethernet, USB, SATA, etc.) via register, which can tune
> > > > + board-level's parameters of PHY, etc.
> > >
> > > I would like second confirmation from DT maintainers, to make sure
> > > it's reasonable to model the HW like this.
> >
> > If by second confirmation, you mean by someone other than me, obviously
> > ignore this, but I think this is "fine". It discussed on a previous
> > revision that all is being done with it is setting a handful bits that
> > signify that the peripheral has been configured correctly.
> >
> > That said, I don't have a clue what's going on with the warning about
> > the dwmac device. That's definitely one for Rob.
>
> Apparently it's just as simple as there being more than one definition
> of the same property. I had it in my head that that was okay when only
> one binding was applied to the node, but clearly not.
>
> I'll have to un-review it until that error is sorted out.
This binding is fine. The error is in the eswin,eic770-eth.yaml binding:
eswin,hsp-sp-csr:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- description: Phandle to HSP(High-Speed Peripheral) device
- description: Offset of phy control register for internal
or external clock selection
- description: Offset of AXI clock controller Low-Power request
register
- description: Offset of register controlling TX/RX clock delay
description: |
High-Speed Peripheral device needed to configure clock selection,
clock low-power mode and clock delay.
The issue here is phandle-array is really a matrix and an outer 'items'
is needed to say there is 1 entry with 4 cells. Like this:
items:
- items:
- description: ...
- description: ...
- description: ...
- description: ...
Please send a fix for that.
The tools could handle this case better, so I'll look into a fix for
them.
Rob
Powered by blists - more mailing lists