linux-kernel - Re: [PATCH v3 2/2] iio: pressure: adp810: Add driver for adp810 sensor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251025-4198-933453@bhairav-test.ee.iitb.ac.in>
Date: Sat, 25 Oct 2025 09:49:08 +0530
From: Akhilesh Patil <akhilesh@...iitb.ac.in>
To: Jonathan Cameron <jonathan.cameron@...wei.com>
Cc: Andy Shevchenko <andriy.shevchenko@...el.com>, jic23@...nel.org,
	dlechner@...libre.com, robh@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, nuno.sa@...log.com, andy@...nel.org,
	marcelo.schmitt1@...il.com, vassilisamir@...il.com,
	salah.triki@...il.com, skhan@...uxfoundation.org,
	linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, akhileshpatilvnit@...il.com
Subject: Re: [PATCH v3 2/2] iio: pressure: adp810: Add driver for adp810
 sensor

On Thu, Oct 23, 2025 at 06:27:21PM +0100, Jonathan Cameron wrote:
> 
> > 
> > >  # When adding new entries keep the list in alphabetical order
> > >  obj-$(CONFIG_ABP060MG) += abp060mg.o
> > > +obj-$(CONFIG_ADP810) += adp810.o
> > >  obj-$(CONFIG_ROHM_BM1390) += rohm-bm1390.o
> > >  obj-$(CONFIG_BMP280) += bmp280.o
> > >  bmp280-objs := bmp280-core.o bmp280-regmap.o
> > > @@ -15,6 +16,7 @@ obj-$(CONFIG_DPS310) += dps310.o
> > >  obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
> > >  obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
> > >  obj-$(CONFIG_HP03) += hp03.o
> > > +obj-$(CONFIG_HP206C) += hp206c.o
> > >  obj-$(CONFIG_HSC030PA) += hsc030pa.o
> > >  obj-$(CONFIG_HSC030PA_I2C) += hsc030pa_i2c.o
> > >  obj-$(CONFIG_HSC030PA_SPI) += hsc030pa_spi.o
> > > @@ -34,11 +36,9 @@ obj-$(CONFIG_SDP500) += sdp500.o
> > >  obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
> > >  st_pressure-y := st_pressure_core.o
> > >  st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
> > > +obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
> > > +obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
> > >  obj-$(CONFIG_T5403) += t5403.o
> > > -obj-$(CONFIG_HP206C) += hp206c.o
> > >  obj-$(CONFIG_ZPA2326) += zpa2326.o
> > >  obj-$(CONFIG_ZPA2326_I2C) += zpa2326_i2c.o
> > >  obj-$(CONFIG_ZPA2326_SPI) += zpa2326_spi.o
> > > -
> > > -obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
> > > -obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o  
> > 
> > I would split order fix into a separate change, but if maintainers are okay
> > with this approach, I would not object.
> 
> I was late to replying to v2 on this.  Split it out please.

Sure. I will take reordering of other entries as an independent patch.
In this series, let's add adp810.o only at alphabetically correct place.

Regards,
Akhilesh