linux-kernel - Re: [PATCH v7 0/8] PCI: Enable Power and configure the TC9563 PCIe switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251029232323.GA1602660@bhelgaas>
Date: Wed, 29 Oct 2025 18:23:23 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	chaitanya chundru <quic_krichai@...cinc.com>,
	Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>,
	cros-qcom-dts-watchers@...omium.org,
	Jingoo Han <jingoohan1@...il.com>,
	Bartosz Golaszewski <brgl@...ev.pl>,
	Krzysztof Wilczyński <kwilczynski@...nel.org>,
	Manivannan Sadhasivam <mani@...nel.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will@...nel.org>, quic_vbadigan@...cnic.com,
	amitk@...nel.org, linux-pci@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org, jorge.ramirez@....qualcomm.com,
	linux-arm-kernel@...ts.infradead.org,
	Dmitry Baryshkov <lumag@...nel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH v7 0/8] PCI: Enable Power and configure the TC9563 PCIe
 switch

On Wed, Oct 29, 2025 at 04:59:53PM +0530, Krishna Chaitanya Chundru wrote:
> TC9563 is the PCIe switch which has one upstream and three downstream
> ports. To one of the downstream ports ethernet MAC is connected as endpoint
> device. Other two downstream ports are supposed to connect to external
> device. One Host can connect to TC956x by upstream port.
> 
> TC9563 switch power is controlled by the GPIO's. After powering on
> the switch will immediately participate in the link training. if the
> host is also ready by that time PCIe link will established. 
> 
> The TC9563 needs to configured certain parameters like de-emphasis,
> disable unused port etc before link is established.
> 
> As the controller starts link training before the probe of pwrctl driver,
> the PCIe link may come up as soon as we power on the switch. Due to this
> configuring the switch itself through i2c will not have any effect as
> this configuration needs to done before link training. To avoid this
> introduce two functions in pci_ops to start_link() & stop_link() which
> will disable the link training if the PCIe link is not up yet.
> 
> This series depends on the https://lore.kernel.org/all/20250124101038.3871768-3-krishna.chundru@oss.qualcomm.com/

What does this series apply to?  It doesn't apply cleanly to v6.18-rc1
(the normal base for topic branches) or v6.18-rc3 or pci/next.

I tried first applying the patches from
https://lore.kernel.org/all/20250124101038.3871768-3-krishna.chundru@oss.qualcomm.com/,
but those don't apply to -rc1 or -rc3 either.

Bjorn