| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251103-dt-bindings-pci-qcom-v1-3-c0f6041abf9b@linaro.org>
Date: Mon, 03 Nov 2025 16:14:43 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kwilczynski@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 03/12] dt-bindings: PCI: qcom,pcie-sdm845: Move SDM845 to
dedicated schema
Move SDM845 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing and maintenance easier.
New schema is equivalent to the old one with few changes:
- Adding a required compatible, which is actually redundant.
- Drop the really obvious comments next to clock/reg/reset-names items.
- Expecting eight MSI interrupts and one global, instead of only one,
which was incomplete hardware description.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../devicetree/bindings/pci/qcom,pcie-sdm845.yaml | 190 +++++++++++++++++++++
.../devicetree/bindings/pci/qcom,pcie.yaml | 46 -----
2 files changed, 190 insertions(+), 46 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sdm845.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sdm845.yaml
new file mode 100644
index 000000000000..1ec9e4f3ff57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sdm845.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@...nel.org>
+ - Manivannan Sadhasivam <mani@...nel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pcie-sdm845
+
+ reg:
+ minItems: 4
+ maxItems: 5
+
+ reg-names:
+ minItems: 4
+ items:
+ - const: parf
+ - const: dbi
+ - const: elbi
+ - const: config
+ - const: mhi
+
+ clocks:
+ minItems: 7
+ maxItems: 8
+
+ clock-names:
+ minItems: 7
+ items:
+ - const: pipe
+ - const: aux
+ - const: cfg
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a
+ - enum: [ ref, tbu ]
+ - const: tbu
+
+ interrupts:
+ minItems: 8
+ maxItems: 9
+
+ interrupt-names:
+ minItems: 8
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+ - const: global
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+required:
+ - power-domains
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@...0000 {
+ compatible = "qcom,pcie-sdm845";
+ reg = <0x0 0x01c00000 0x0 0x2000>,
+ <0x0 0x60000000 0x0 0xf1d>,
+ <0x0 0x60000f20 0x0 0xa8>,
+ <0x0 0x60100000 0x0 0x100000>,
+ <0x0 0x01c07000 0x0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
+
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "global";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ iommu-map = <0x0 &apps_smmu 0x1c10 0x1>,
+ <0x100 &apps_smmu 0x1c11 0x1>,
+ <0x200 &apps_smmu 0x1c12 0x1>,
+ <0x300 &apps_smmu 0x1c13 0x1>,
+ <0x400 &apps_smmu 0x1c14 0x1>,
+ <0x500 &apps_smmu 0x1c15 0x1>,
+ <0x600 &apps_smmu 0x1c16 0x1>,
+ <0x700 &apps_smmu 0x1c17 0x1>,
+ <0x800 &apps_smmu 0x1c18 0x1>,
+ <0x900 &apps_smmu 0x1c19 0x1>,
+ <0xa00 &apps_smmu 0x1c1a 0x1>,
+ <0xb00 &apps_smmu 0x1c1b 0x1>,
+ <0xc00 &apps_smmu 0x1c1c 0x1>,
+ <0xd00 &apps_smmu 0x1c1d 0x1>,
+ <0xe00 &apps_smmu 0x1c1e 0x1>,
+ <0xf00 &apps_smmu 0x1c1f 0x1>;
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+ vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index de6439a45ef4..68cae47c2ef6 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -30,7 +30,6 @@ properties:
- qcom,pcie-ipq9574
- qcom,pcie-msm8996
- qcom,pcie-qcs404
- - qcom,pcie-sdm845
- items:
- enum:
- qcom,pcie-ipq5332
@@ -194,7 +193,6 @@ allOf:
enum:
- qcom,pcie-apq8084
- qcom,pcie-msm8996
- - qcom,pcie-sdm845
then:
properties:
reg:
@@ -514,49 +512,6 @@ allOf:
- const: pwr # PWR reset
- const: ahb # AHB reset
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sdm845
- then:
- oneOf:
- # Unfortunately the "optional" ref clock is used in the middle of the list
- - properties:
- clocks:
- minItems: 8
- maxItems: 8
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ref # REFERENCE clock
- - const: tbu # PCIe TBU clock
- - properties:
- clocks:
- minItems: 7
- maxItems: 7
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- properties:
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- if:
not:
properties:
@@ -598,7 +553,6 @@ allOf:
- qcom,pcie-ipq8074-gen3
- qcom,pcie-msm8996
- qcom,pcie-msm8998
- - qcom,pcie-sdm845
then:
oneOf:
- properties:
--
2.48.1
Powered by blists - more mailing lists