linux-kernel - Re: [PATCH DNM v2 3/5] arm64: dts: qcom: qcs6490-radxa-dragon-q6a: Enable all available QUP SEs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1d4ac08e-ccfe-4b6a-8f77-e97836171310@oss.qualcomm.com>
Date: Mon, 3 Nov 2025 13:57:07 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Xilin Wu <sophon@...xa.com>, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>,
        Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
Subject: Re: [PATCH DNM v2 3/5] arm64: dts: qcom: qcs6490-radxa-dragon-q6a:
 Enable all available QUP SEs

On 9/14/25 5:57 PM, Xilin Wu wrote:
> Add and enable all available QUP SEs on this board, allowing I2C, SPI and
> UART functions from the 40-Pin GPIO header to work.
> 
> Signed-off-by: Xilin Wu <sophon@...xa.com>
> 
> ---
> 
> This change depends on the following patch series:
> https://lore.kernel.org/all/20250911043256.3523057-1-viken.dadhaniya@oss.qualcomm.com/

You should be good to go resending this change now, the series is in> ---
>  .../boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts     | 66 ++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
> index 85465702279efb7ab324baea0663bdbdbd5fb5ac..d30cddfc3eff07237c7e3480a5d42b29091d87d6 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts
> @@ -432,6 +432,14 @@ &gcc {
>  			   <GCC_WPSS_RSCP_CLK>;
>  };
>  
> +&gpi_dma0 {
> +	status = "okay";
> +};
> +
> +&gpi_dma1 {
> +	status = "okay";
> +};
> +
>  &gpu {
>  	status = "okay";
>  };
> @@ -440,6 +448,40 @@ &gpu_zap_shader {
>  	firmware-name = "qcom/qcs6490/a660_zap.mbn";
>  };
>  
> +/* Pin 13, 15 in GPIO header */
> +&i2c0 {
> +	qcom,enable-gsi-dma;
> +	status = "okay";

Please leave a spare \n before status, otherwise lgtm

Konrad