| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7d990c72acca31b2fe6c7685fd13ef5284c7646f.1762281527.git.Jonathan.Santos@analog.com>
Date: Wed, 5 Nov 2025 09:40:34 -0300
From: Jonathan Santos <Jonathan.Santos@...log.com>
To: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Jonathan Santos <Jonathan.Santos@...log.com>,
<Michael.Hennerich@...log.com>, <ramona.gradinariu@...log.com>,
<antoniu.miclaus@...log.com>, <jic23@...nel.org>,
<dlechner@...libre.com>, <nuno.sa@...log.com>, <andy@...nel.org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>
Subject: [PATCH 2/2] iio: accel: adxl380: add support for ADXL318 and ADXL319
The ADXL318 and ADXL319 are low noise density, low power, 3-axis
accelerometers based on ADXL380 and ADXL382, respectively. The main
difference between the new parts and the existing ones are the absence
of interrupts and events like tap detection, activity/inactivity, and
free-fall detection.
Other differences in the new parts are fewer power modes, basically
allowing only idle and measurement modes, and the removal of the 12-bit
SAR ADC path for the 3-axis signals (known as lower signal chain),
being excluisive for the temperature sensor in the ADXL318/319.
Signed-off-by: Jonathan Santos <Jonathan.Santos@...log.com>
---
drivers/iio/accel/adxl380.c | 134 ++++++++++++++++++++++----------
drivers/iio/accel/adxl380.h | 4 +
drivers/iio/accel/adxl380_i2c.c | 4 +
drivers/iio/accel/adxl380_spi.c | 4 +
4 files changed, 107 insertions(+), 39 deletions(-)
diff --git a/drivers/iio/accel/adxl380.c b/drivers/iio/accel/adxl380.c
index 0cf3c6815829..7733a0902afa 100644
--- a/drivers/iio/accel/adxl380.c
+++ b/drivers/iio/accel/adxl380.c
@@ -27,6 +27,8 @@
#define ADXL380_ID_VAL 380
#define ADXL382_ID_VAL 382
+#define ADXL318_ID_VAL 380
+#define ADXL319_ID_VAL 382
#define ADXL380_DEVID_AD_REG 0x00
#define ADLX380_PART_ID_REG 0x02
@@ -178,41 +180,6 @@ enum adxl380_tap_time_type {
static const int adxl380_range_scale_factor_tbl[] = { 1, 2, 4 };
-const struct adxl380_chip_info adxl380_chip_info = {
- .name = "adxl380",
- .chip_id = ADXL380_ID_VAL,
- .scale_tbl = {
- [ADXL380_OP_MODE_4G_RANGE] = { 0, 1307226 },
- [ADXL380_OP_MODE_8G_RANGE] = { 0, 2615434 },
- [ADXL380_OP_MODE_16G_RANGE] = { 0, 5229886 },
- },
- .samp_freq_tbl = { 8000, 16000, 32000 },
- /*
- * The datasheet defines an intercept of 470 LSB at 25 degC
- * and a sensitivity of 10.2 LSB/C.
- */
- .temp_offset = 25 * 102 / 10 - 470,
-
-};
-EXPORT_SYMBOL_NS_GPL(adxl380_chip_info, "IIO_ADXL380");
-
-const struct adxl380_chip_info adxl382_chip_info = {
- .name = "adxl382",
- .chip_id = ADXL382_ID_VAL,
- .scale_tbl = {
- [ADXL382_OP_MODE_15G_RANGE] = { 0, 4903325 },
- [ADXL382_OP_MODE_30G_RANGE] = { 0, 9806650 },
- [ADXL382_OP_MODE_60G_RANGE] = { 0, 19613300 },
- },
- .samp_freq_tbl = { 16000, 32000, 64000 },
- /*
- * The datasheet defines an intercept of 570 LSB at 25 degC
- * and a sensitivity of 10.2 LSB/C.
- */
- .temp_offset = 25 * 102 / 10 - 570,
-};
-EXPORT_SYMBOL_NS_GPL(adxl382_chip_info, "IIO_ADXL380");
-
static const unsigned int adxl380_th_reg_high_addr[2] = {
[ADXL380_ACTIVITY] = ADXL380_THRESH_ACT_H_REG,
[ADXL380_INACTIVITY] = ADXL380_THRESH_INACT_H_REG,
@@ -276,9 +243,14 @@ static int adxl380_set_measure_en(struct adxl380_state *st, bool en)
if (ret)
return ret;
- /* Activity/ Inactivity detection available only in VLP/ULP mode */
- if (FIELD_GET(ADXL380_ACT_EN_MSK, act_inact_ctl) ||
- FIELD_GET(ADXL380_INACT_EN_MSK, act_inact_ctl))
+ /*
+ * Activity/Inactivity detection available only in VLP/ULP
+ * mode and for devices that support low power modes. Otherwise
+ * go straight to measure mode (same bits as ADXL380_OP_MODE_HP).
+ */
+ if (st->chip_info->has_low_power &&
+ (FIELD_GET(ADXL380_ACT_EN_MSK, act_inact_ctl) ||
+ FIELD_GET(ADXL380_INACT_EN_MSK, act_inact_ctl)))
op_mode = ADXL380_OP_MODE_VLP;
else
op_mode = ADXL380_OP_MODE_HP;
@@ -1632,6 +1604,90 @@ static const struct iio_info adxl380_info = {
.hwfifo_set_watermark = adxl380_set_watermark,
};
+static const struct iio_info adxl318_info = {
+ .read_raw = adxl380_read_raw,
+ .read_avail = &adxl380_read_avail,
+ .write_raw = adxl380_write_raw,
+ .write_raw_get_fmt = adxl380_write_raw_get_fmt,
+ .debugfs_reg_access = &adxl380_reg_access,
+ .hwfifo_set_watermark = adxl380_set_watermark,
+};
+
+const struct adxl380_chip_info adxl380_chip_info = {
+ .name = "adxl380",
+ .chip_id = ADXL380_ID_VAL,
+ .scale_tbl = {
+ [ADXL380_OP_MODE_4G_RANGE] = { 0, 1307226 },
+ [ADXL380_OP_MODE_8G_RANGE] = { 0, 2615434 },
+ [ADXL380_OP_MODE_16G_RANGE] = { 0, 5229886 },
+ },
+ .samp_freq_tbl = { 8000, 16000, 32000 },
+ /*
+ * The datasheet defines an intercept of 470 LSB at 25 degC
+ * and a sensitivity of 10.2 LSB/C.
+ */
+ .temp_offset = 25 * 102 / 10 - 470,
+ .has_low_power = true,
+ .info = &adxl380_info,
+
+};
+EXPORT_SYMBOL_NS_GPL(adxl380_chip_info, "IIO_ADXL380");
+
+const struct adxl380_chip_info adxl382_chip_info = {
+ .name = "adxl382",
+ .chip_id = ADXL382_ID_VAL,
+ .scale_tbl = {
+ [ADXL382_OP_MODE_15G_RANGE] = { 0, 4903325 },
+ [ADXL382_OP_MODE_30G_RANGE] = { 0, 9806650 },
+ [ADXL382_OP_MODE_60G_RANGE] = { 0, 19613300 },
+ },
+ .samp_freq_tbl = { 16000, 32000, 64000 },
+ /*
+ * The datasheet defines an intercept of 570 LSB at 25 degC
+ * and a sensitivity of 10.2 LSB/C.
+ */
+ .temp_offset = 25 * 102 / 10 - 570,
+ .has_low_power = true,
+ .info = &adxl380_info,
+};
+EXPORT_SYMBOL_NS_GPL(adxl382_chip_info, "IIO_ADXL380");
+
+const struct adxl380_chip_info adxl318_chip_info = {
+ .name = "adxl318",
+ .chip_id = ADXL318_ID_VAL,
+ .scale_tbl = {
+ [ADXL380_OP_MODE_4G_RANGE] = { 0, 1307226 },
+ [ADXL380_OP_MODE_8G_RANGE] = { 0, 2615434 },
+ [ADXL380_OP_MODE_16G_RANGE] = { 0, 5229886 },
+ },
+ .samp_freq_tbl = { 8000, 16000, 32000 },
+ /*
+ * The datasheet defines an intercept of 550 LSB at 25 degC
+ * and a sensitivity of 10.2 LSB/C.
+ */
+ .temp_offset = 25 * 102 / 10 - 550,
+ .info = &adxl318_info,
+};
+EXPORT_SYMBOL_NS_GPL(adxl318_chip_info, "IIO_ADXL380");
+
+const struct adxl380_chip_info adxl319_chip_info = {
+ .name = "adxl319",
+ .chip_id = ADXL319_ID_VAL,
+ .scale_tbl = {
+ [ADXL382_OP_MODE_15G_RANGE] = { 0, 4903325 },
+ [ADXL382_OP_MODE_30G_RANGE] = { 0, 9806650 },
+ [ADXL382_OP_MODE_60G_RANGE] = { 0, 19613300 },
+ },
+ .samp_freq_tbl = { 16000, 32000, 64000 },
+ /*
+ * The datasheet defines an intercept of 550 LSB at 25 degC
+ * and a sensitivity of 10.2 LSB/C.
+ */
+ .temp_offset = 25 * 102 / 10 - 550,
+ .info = &adxl318_info,
+};
+EXPORT_SYMBOL_NS_GPL(adxl319_chip_info, "IIO_ADXL380");
+
static const struct iio_event_spec adxl380_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -1866,7 +1922,7 @@ int adxl380_probe(struct device *dev, struct regmap *regmap,
indio_dev->channels = adxl380_channels;
indio_dev->num_channels = ARRAY_SIZE(adxl380_channels);
indio_dev->name = chip_info->name;
- indio_dev->info = &adxl380_info;
+ indio_dev->info = chip_info->info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = devm_regulator_get_enable(dev, "vddio");
diff --git a/drivers/iio/accel/adxl380.h b/drivers/iio/accel/adxl380.h
index a683625d897a..5d88c111d616 100644
--- a/drivers/iio/accel/adxl380.h
+++ b/drivers/iio/accel/adxl380.h
@@ -14,10 +14,14 @@ struct adxl380_chip_info {
const int samp_freq_tbl[3];
const int temp_offset;
const u16 chip_id;
+ const struct iio_info *info;
+ const bool has_low_power;
};
extern const struct adxl380_chip_info adxl380_chip_info;
extern const struct adxl380_chip_info adxl382_chip_info;
+extern const struct adxl380_chip_info adxl318_chip_info;
+extern const struct adxl380_chip_info adxl319_chip_info;
int adxl380_probe(struct device *dev, struct regmap *regmap,
const struct adxl380_chip_info *chip_info);
diff --git a/drivers/iio/accel/adxl380_i2c.c b/drivers/iio/accel/adxl380_i2c.c
index b4f86f972361..1851bef0b0d3 100644
--- a/drivers/iio/accel/adxl380_i2c.c
+++ b/drivers/iio/accel/adxl380_i2c.c
@@ -35,6 +35,8 @@ static int adxl380_i2c_probe(struct i2c_client *client)
static const struct i2c_device_id adxl380_i2c_id[] = {
{ "adxl380", (kernel_ulong_t)&adxl380_chip_info },
{ "adxl382", (kernel_ulong_t)&adxl382_chip_info },
+ { "adxl318", (kernel_ulong_t)&adxl318_chip_info },
+ { "adxl319", (kernel_ulong_t)&adxl319_chip_info },
{ }
};
MODULE_DEVICE_TABLE(i2c, adxl380_i2c_id);
@@ -42,6 +44,8 @@ MODULE_DEVICE_TABLE(i2c, adxl380_i2c_id);
static const struct of_device_id adxl380_of_match[] = {
{ .compatible = "adi,adxl380", .data = &adxl380_chip_info },
{ .compatible = "adi,adxl382", .data = &adxl382_chip_info },
+ { .compatible = "adi,adxl318", .data = &adxl318_chip_info },
+ { .compatible = "adi,adxl319", .data = &adxl319_chip_info },
{ }
};
MODULE_DEVICE_TABLE(of, adxl380_of_match);
diff --git a/drivers/iio/accel/adxl380_spi.c b/drivers/iio/accel/adxl380_spi.c
index 6edd0d211ffa..9076890bbb5f 100644
--- a/drivers/iio/accel/adxl380_spi.c
+++ b/drivers/iio/accel/adxl380_spi.c
@@ -37,6 +37,8 @@ static int adxl380_spi_probe(struct spi_device *spi)
static const struct spi_device_id adxl380_spi_id[] = {
{ "adxl380", (kernel_ulong_t)&adxl380_chip_info },
{ "adxl382", (kernel_ulong_t)&adxl382_chip_info },
+ { "adxl318", (kernel_ulong_t)&adxl318_chip_info },
+ { "adxl319", (kernel_ulong_t)&adxl319_chip_info },
{ }
};
MODULE_DEVICE_TABLE(spi, adxl380_spi_id);
@@ -44,6 +46,8 @@ MODULE_DEVICE_TABLE(spi, adxl380_spi_id);
static const struct of_device_id adxl380_of_match[] = {
{ .compatible = "adi,adxl380", .data = &adxl380_chip_info },
{ .compatible = "adi,adxl382", .data = &adxl382_chip_info },
+ { .compatible = "adi,adxl318", .data = &adxl318_chip_info },
+ { .compatible = "adi,adxl319", .data = &adxl319_chip_info },
{ }
};
MODULE_DEVICE_TABLE(of, adxl380_of_match);
--
2.34.1
Powered by blists - more mailing lists