[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <9724fc14-c362-4f70-b14b-718049737895@kernel.org>
Date: Thu, 6 Nov 2025 16:12:12 +0900
From: Damien Le Moal <dlemoal@...nel.org>
To: Markus Probst <markus.probst@...teo.de>, Niklas Cassel
<cassel@...nel.org>,
"James E.J. Bottomley" <James.Bottomley@...senPartnership.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>
Cc: linux-ide@...r.kernel.org, linux-scsi@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 2/3] ata: Use ACPI methods to power on disks
On 11/4/25 11:24 PM, Markus Probst wrote:
> Some embedded devices have the ability to control whether power is
> provided to the disks via the SATA power connector or not. If power
> resources are defined on ATA ports / devices in ACPI, we should try to set
> the power state to D0 before probing the disk to ensure that any power
> supply or power gate that may exist is providing power to the disk.
>
> An example for such devices would be newer synology NAS devices. Every
> disk slot has its own SATA power connector. Whether the connector is
> providing power is controlled via an gpio, which is *off by default*.
> Also the disk loses power on reboots.
>
> Add a new function, ata_acpi_port_power_on(), that will be used to power
> on the SATA power connector if usable ACPI power resources on the
> associated ATA port / device are found. It will be called right before
> probing the port, therefore the disk will be powered on just in time.
>
> Signed-off-by: Markus Probst <markus.probst@...teo.de>
Looks good to me.
Reviewed-by: Damien Le Moal <dlemoal@...nel.org>
--
Damien Le Moal
Western Digital Research
Powered by blists - more mailing lists