linux-kernel - [PATCH v3 1/2] arm64: dts: qcom: Add PCIe3 and PCIe5 support for HAMOA-IOT-SOM platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251112090316.936187-2-ziyue.zhang@oss.qualcomm.com>
Date: Wed, 12 Nov 2025 17:03:15 +0800
From: Ziyue Zhang <ziyue.zhang@....qualcomm.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org, jingoohan1@...il.com,
        mani@...nel.org, lpieralisi@...nel.org, kwilczynski@...nel.org,
        bhelgaas@...gle.com, johan+linaro@...nel.org, vkoul@...nel.org,
        kishon@...nel.org, neil.armstrong@...aro.org, abel.vesa@...aro.org,
        kw@...ux.com
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-phy@...ts.infradead.org, qiang.yu@....qualcomm.com,
        krishna.chundru@....qualcomm.com, quic_vbadigan@...cinc.com,
        Ziyue Zhang <ziyue.zhang@....qualcomm.com>
Subject: [PATCH v3 1/2] arm64: dts: qcom: Add PCIe3 and PCIe5 support for HAMOA-IOT-SOM platform

HAMOA IoT SOM requires PCIe3 and PCIe5 connectivity for SATA controller
and SDX65.
Add the required sideband signals (PERST#, WAKE#, CLKREQ#), pinctrl states
and power supply properties in the device tree, which PCIe3 and PCIe5
require.

Signed-off-by: Ziyue Zhang <ziyue.zhang@....qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 79 +++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
index 4de7c0abb25a..abb8ea323d78 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -390,6 +390,22 @@ &gpu_zap_shader {
 	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
 };
 
+&pcie3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default>;
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie4 {
 	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -407,6 +423,23 @@ &pcie4_phy {
 	status = "okay";
 };
 
+&pcie5 {
+	perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -454,6 +487,29 @@ &tlmm {
 	gpio-reserved-ranges = <34 2>, /* TPM LP & INT */
 			       <44 4>; /* SPI (TPM) */
 
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";
@@ -477,6 +533,29 @@ wake-n-pins {
 		};
 	};
 
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie5_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio149";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie6a_default: pcie6a-default-state {
 		clkreq-n-pins {
 			pins = "gpio153";
-- 
2.34.1