linux-kernel - [PATCH v3 2/2] arm64: dts: qcom: Add PCIe3 and PCIe5 regulators for HAMAO-IOT-EVK board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251112090316.936187-3-ziyue.zhang@oss.qualcomm.com>
Date: Wed, 12 Nov 2025 17:03:16 +0800
From: Ziyue Zhang <ziyue.zhang@....qualcomm.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org, jingoohan1@...il.com,
        mani@...nel.org, lpieralisi@...nel.org, kwilczynski@...nel.org,
        bhelgaas@...gle.com, johan+linaro@...nel.org, vkoul@...nel.org,
        kishon@...nel.org, neil.armstrong@...aro.org, abel.vesa@...aro.org,
        kw@...ux.com
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-phy@...ts.infradead.org, qiang.yu@....qualcomm.com,
        krishna.chundru@....qualcomm.com, quic_vbadigan@...cinc.com,
        Ziyue Zhang <ziyue.zhang@....qualcomm.com>
Subject: [PATCH v3 2/2] arm64: dts: qcom: Add PCIe3 and PCIe5 regulators for HAMAO-IOT-EVK board

HAMAO IoT EVK uses PCIe5 to connect an SDX65 module for WWAN functionality
and PCIe3 to connect a SATA controller. These interfaces require multiple
voltage rails: PCIe5 needs 3.3V supplied by vreg_wwan, while PCIe3 requires
12V, 3.3V, and 3.3V AUX rails, controlled via PMIC GPIOs.

Add the required fixed regulators with related pin configuration, and
connect them to the PCIe3 and PCIe5 ports to ensure proper power for the
SDX65 module and SATA controller.

Signed-off-by: Ziyue Zhang <ziyue.zhang@....qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 36dd6599402b..ac17f7cb8b3d 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -199,6 +199,48 @@ vreg_nvme: regulator-nvme {
 		regulator-boot-on;
 	};
 
+	vreg_pcie_12v: regulator-pcie-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pcie_x8_12v>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_main_3p3_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3_aux: regulator-pcie-3v3-aux {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3_AUX";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
+		pinctrl-names = "default";
+	};
+
 	/* Left unused as the retimer is not used on this board. */
 	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
 		compatible = "regulator-fixed";
@@ -844,6 +886,16 @@ &mdss_dp3_phy {
 	status = "okay";
 };
 
+&pcie3_port {
+	vpcie12v-supply = <&vreg_pcie_12v>;
+	vpcie3v3-supply = <&vreg_pcie_3v3>;
+	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
+};
+
+&pcie5 {
+	vddpe-3v3-supply = <&vreg_wwan>;
+};
+
 &pcie6a {
 	vddpe-3v3-supply = <&vreg_nvme>;
 };
@@ -868,6 +920,17 @@ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
 	};
 };
 
+&pm8550ve_8_gpios {
+	pcie_x8_12v: pcie-12v-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
 &pm8550ve_9_gpios {
 	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
 		pins = "gpio8";
@@ -879,6 +942,26 @@ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
 	};
 };
 
+&pmc8380_3_gpios {
+	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+
+	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
+		pins = "gpio6";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
 &pmc8380_5_gpios {
 	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
 		pins = "gpio8";
-- 
2.34.1