| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKR-sGdrJ4Zdw_j1Xj2DbRk0ksrjLS7xYcYGa_LDZsfT4ODhdw@mail.gmail.com>
Date: Tue, 25 Nov 2025 12:45:10 +0100
From: Álvaro Fernández Rojas <noltari@...il.com>
To: Jonas Gorski <jonas.gorski@...il.com>
Cc: Florian Fainelli <florian.fainelli@...adcom.com>, Andrew Lunn <andrew@...n.ch>,
Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 7/7] net: dsa: b53: allow VID 0 for BCM5325/65
El mar, 25 nov 2025 a las 8:52, Jonas Gorski
(<jonas.gorski@...il.com>) escribió:
>
> Now that writing ARL entries works properly, we can actually use VID 0
> as the default untagged VLAN for BCM5325 and BCM5365 as well, so use 0
> as default PVID always.
>
> Signed-off-by: Jonas Gorski <jonas.gorski@...il.com>
> ---
> drivers/net/dsa/b53/b53_common.c | 49 +++++++++++---------------------
> 1 file changed, 17 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> index ac995f36ed95..4eff64204897 100644
> --- a/drivers/net/dsa/b53/b53_common.c
> +++ b/drivers/net/dsa/b53/b53_common.c
> @@ -870,14 +870,6 @@ static void b53_enable_stp(struct b53_device *dev)
> b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
> }
>
> -static u16 b53_default_pvid(struct b53_device *dev)
> -{
> - if (is5325(dev) || is5365(dev))
> - return 1;
> - else
> - return 0;
> -}
> -
> static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
> {
> struct b53_device *dev = ds->priv;
> @@ -906,14 +898,12 @@ int b53_configure_vlan(struct dsa_switch *ds)
> struct b53_device *dev = ds->priv;
> struct b53_vlan vl = { 0 };
> struct b53_vlan *v;
> - int i, def_vid;
> u16 vid;
> -
> - def_vid = b53_default_pvid(dev);
> + int i;
>
> /* clear all vlan entries */
> if (is5325(dev) || is5365(dev)) {
> - for (i = def_vid; i < dev->num_vlans; i++)
> + for (i = 0; i < dev->num_vlans; i++)
> b53_set_vlan_entry(dev, i, &vl);
> } else {
> b53_do_vlan_op(dev, VTA_CMD_CLEAR);
> @@ -927,7 +917,7 @@ int b53_configure_vlan(struct dsa_switch *ds)
> * entry. Do this only when the tagging protocol is not
> * DSA_TAG_PROTO_NONE
> */
> - v = &dev->vlans[def_vid];
> + v = &dev->vlans[0];
> b53_for_each_port(dev, i) {
> if (!b53_vlan_port_may_join_untagged(ds, i))
> continue;
> @@ -935,16 +925,15 @@ int b53_configure_vlan(struct dsa_switch *ds)
> vl.members |= BIT(i);
> if (!b53_vlan_port_needs_forced_tagged(ds, i))
> vl.untag = vl.members;
> - b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(i),
> - def_vid);
> + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(i), 0);
> }
> - b53_set_vlan_entry(dev, def_vid, &vl);
> + b53_set_vlan_entry(dev, 0, &vl);
>
> if (dev->vlan_filtering) {
> /* Upon initial call we have not set-up any VLANs, but upon
> * system resume, we need to restore all VLAN entries.
> */
> - for (vid = def_vid + 1; vid < dev->num_vlans; vid++) {
> + for (vid = 1; vid < dev->num_vlans; vid++) {
> v = &dev->vlans[vid];
>
> if (!v->members)
> @@ -1280,7 +1269,6 @@ static int b53_setup(struct dsa_switch *ds)
> struct b53_device *dev = ds->priv;
> struct b53_vlan *vl;
> unsigned int port;
> - u16 pvid;
> int ret;
>
> /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
> @@ -1310,8 +1298,7 @@ static int b53_setup(struct dsa_switch *ds)
> }
>
> /* setup default vlan for filtering mode */
> - pvid = b53_default_pvid(dev);
> - vl = &dev->vlans[pvid];
> + vl = &dev->vlans[0];
> b53_for_each_port(dev, port) {
> vl->members |= BIT(port);
> if (!b53_vlan_port_needs_forced_tagged(ds, port))
> @@ -1740,7 +1727,7 @@ int b53_vlan_add(struct dsa_switch *ds, int port,
> if (pvid)
> new_pvid = vlan->vid;
> else if (!pvid && vlan->vid == old_pvid)
> - new_pvid = b53_default_pvid(dev);
> + new_pvid = 0;
> else
> new_pvid = old_pvid;
> dev->ports[port].pvid = new_pvid;
> @@ -1790,7 +1777,7 @@ int b53_vlan_del(struct dsa_switch *ds, int port,
> vl->members &= ~BIT(port);
>
> if (pvid == vlan->vid)
> - pvid = b53_default_pvid(dev);
> + pvid = 0;
> dev->ports[port].pvid = pvid;
>
> if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
> @@ -2269,7 +2256,7 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
> struct b53_device *dev = ds->priv;
> struct b53_vlan *vl;
> s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
> - u16 pvlan, reg, pvid;
> + u16 pvlan, reg;
> unsigned int i;
>
> /* On 7278, port 7 which connects to the ASP should only receive
> @@ -2278,8 +2265,7 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
> if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
> return -EINVAL;
>
> - pvid = b53_default_pvid(dev);
> - vl = &dev->vlans[pvid];
> + vl = &dev->vlans[0];
>
> if (dev->vlan_filtering) {
> /* Make this port leave the all VLANs join since we will have
> @@ -2295,9 +2281,9 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
> reg);
> }
>
> - b53_get_vlan_entry(dev, pvid, vl);
> + b53_get_vlan_entry(dev, 0, vl);
> vl->members &= ~BIT(port);
> - b53_set_vlan_entry(dev, pvid, vl);
> + b53_set_vlan_entry(dev, 0, vl);
> }
>
> b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
> @@ -2336,7 +2322,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
> struct b53_vlan *vl;
> s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
> unsigned int i;
> - u16 pvlan, reg, pvid;
> + u16 pvlan, reg;
>
> b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
>
> @@ -2361,8 +2347,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
> b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
> dev->ports[port].vlan_ctl_mask = pvlan;
>
> - pvid = b53_default_pvid(dev);
> - vl = &dev->vlans[pvid];
> + vl = &dev->vlans[0];
>
> if (dev->vlan_filtering) {
> /* Make this port join all VLANs without VLAN entries */
> @@ -2374,9 +2359,9 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
> b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
> }
>
> - b53_get_vlan_entry(dev, pvid, vl);
> + b53_get_vlan_entry(dev, 0, vl);
> vl->members |= BIT(port);
> - b53_set_vlan_entry(dev, pvid, vl);
> + b53_set_vlan_entry(dev, 0, vl);
> }
> }
> EXPORT_SYMBOL(b53_br_leave);
> --
> 2.43.0
>
Thank you so much for these patches.
I've tested all of them on a Huawei HG556a (bcm6358 + bcm5325).
Tested-by: Álvaro Fernández Rojas <noltari@...il.com>
Powered by blists - more mailing lists