| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2025112500-deuce-jasmine-cf8c@gregkh>
Date: Tue, 25 Nov 2025 14:02:25 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: duoming@....edu.cn
Cc: linux-usb@...r.kernel.org, heikki.krogerus@...ux.intel.com,
mitltlatltl@...il.com, linux-kernel@...r.kernel.org,
sergei.shtylyov@...il.com, stable@...r.kernel.org
Subject: Re: [PATCH v2 2/2] usb: typec: ucsi: fix use-after-free caused by
uec->work
On Tue, Nov 25, 2025 at 08:02:40PM +0800, duoming@....edu.cn wrote:
> On Tue, 25 Nov 2025 12:44:02 +0100, Greg KH wrote:
> > > The delayed work uec->work is scheduled in gaokun_ucsi_probe()
> > > but never properly canceled in gaokun_ucsi_remove(). This creates
> > > use-after-free scenarios where the ucsi and gaokun_ucsi structure
> > > are freed after ucsi_destroy() completes execution, while the
> > > gaokun_ucsi_register_worker() might be either currently executing
> > > or still pending in the work queue. The already-freed gaokun_ucsi
> > > or ucsi structure may then be accessed.
> > >
> > > Furthermore, the race window is 3 seconds, which is sufficiently
> > > long to make this bug easily reproducible. The following is the
> > > trace captured by KASAN:
> > >
> > > ==================================================================
> > > BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630
> > > Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0
> > > ...
> > > Call trace:
> > > show_stack+0x18/0x24 (C)
> > > dump_stack_lvl+0x78/0x90
> > > print_report+0x114/0x580
> > > kasan_report+0xa4/0xf0
> > > __asan_report_store8_noabort+0x20/0x2c
> > > __run_timers+0x5ec/0x630
> > > run_timer_softirq+0xe8/0x1cc
> > > handle_softirqs+0x294/0x720
> > > __do_softirq+0x14/0x20
> > > ____do_softirq+0x10/0x1c
> > > call_on_irq_stack+0x30/0x48
> > > do_softirq_own_stack+0x1c/0x28
> > > __irq_exit_rcu+0x27c/0x364
> > > irq_exit_rcu+0x10/0x1c
> > > el1_interrupt+0x40/0x60
> > > el1h_64_irq_handler+0x18/0x24
> > > el1h_64_irq+0x6c/0x70
> > > arch_local_irq_enable+0x4/0x8 (P)
> > > do_idle+0x334/0x458
> > > cpu_startup_entry+0x60/0x70
> > > rest_init+0x158/0x174
> > > start_kernel+0x2f8/0x394
> > > __primary_switched+0x8c/0x94
> > >
> > > Allocated by task 72 on cpu 0 at 27.510341s:
> > > kasan_save_stack+0x2c/0x54
> > > kasan_save_track+0x24/0x5c
> > > kasan_save_alloc_info+0x40/0x54
> > > __kasan_kmalloc+0xa0/0xb8
> > > __kmalloc_node_track_caller_noprof+0x1c0/0x588
> > > devm_kmalloc+0x7c/0x1c8
> > > gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8
> > > really_probe+0x17c/0x5b8
> > > __driver_probe_device+0x158/0x2c4
> > > driver_probe_device+0x10c/0x264
> > > __device_attach_driver+0x168/0x2d0
> > > bus_for_each_drv+0x100/0x188
> > > __device_attach+0x174/0x368
> > > device_initial_probe+0x14/0x20
> > > bus_probe_device+0x120/0x150
> > > device_add+0xb3c/0x10fc
> > > __auxiliary_device_add+0x88/0x130
> > > ...
> > >
> > > Freed by task 73 on cpu 1 at 28.910627s:
> > > kasan_save_stack+0x2c/0x54
> > > kasan_save_track+0x24/0x5c
> > > __kasan_save_free_info+0x4c/0x74
> > > __kasan_slab_free+0x60/0x8c
> > > kfree+0xd4/0x410
> > > devres_release_all+0x140/0x1f0
> > > device_unbind_cleanup+0x20/0x190
> > > device_release_driver_internal+0x344/0x460
> > > device_release_driver+0x18/0x24
> > > bus_remove_device+0x198/0x274
> > > device_del+0x310/0xa84
> > > ...
> > >
> > > The buggy address belongs to the object at ffff00000ec28c00
> > > which belongs to the cache kmalloc-512 of size 512
> > > The buggy address is located 200 bytes inside of
> > > freed 512-byte region
> > > The buggy address belongs to the physical page:
> > > page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28
> > > head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
> > > flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff)
> > > page_type: f5(slab)
> > > raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
> > > raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
> > > head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000
> > > head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
> > > head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff
> > > head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
> > > page dumped because: kasan: bad access detected
> > >
> > > Memory state around the buggy address:
> > > ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> > > ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > > >ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > > ^
> > > ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > > ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> > > ==================================================================
> > >
> > > Add disable_delayed_work_sync() in gaokun_ucsi_remove() to ensure
> > > that uec->work is properly canceled and prevented from executing
> > > after the ucsi and gaokun_ucsi structure have been deallocated.
> > >
> > > Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
> > > Cc: stable@...r.kernel.org
> > > Signed-off-by: Duoming Zhou <duoming@....edu.cn>
> > > ---
> > > drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c b/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
> > > index 8401ab414bd..c5965656bab 100644
> > > --- a/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
> > > +++ b/drivers/usb/typec/ucsi/ucsi_huawei_gaokun.c
> > > @@ -503,6 +503,7 @@ static void gaokun_ucsi_remove(struct auxiliary_device *adev)
> > > {
> > > struct gaokun_ucsi *uec = auxiliary_get_drvdata(adev);
> > >
> > > + disable_delayed_work_sync(&uec->work);
> > > gaokun_ec_unregister_notify(uec->ec, &uec->nb);
> > > ucsi_unregister(uec->ucsi);
> > > ucsi_destroy(uec->ucsi);
> > > --
> > > 2.34.1
> > >
> > >
> >
> > What changed from v1?
>
> The original patch[1] only fixes the probe failure in
> gaokun_ucsi_probe(). This new version is a patch series
> that also addresses the use-after-free issue.
>
> [1] https://lore.kernel.org/lkml/20251125082505.52249-1-duoming@zju.edu.cn/
Always document this in the future please.
Powered by blists - more mailing lists