[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251128-strongbox-craziness-cea572479d17@spud>
Date: Fri, 28 Nov 2025 18:49:06 +0000
From: Conor Dooley <conor@...nel.org>
To: Josua Mayer <josua@...id-run.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Mikhail Anikin <mikhail.anikin@...id-run.com>,
Yazan Shhady <yazan.shhady@...id-run.com>,
Jon Nettleton <jon@...id-run.com>, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: mmc: renesas,sdhi: Add mux-states
property
On Fri, Nov 28, 2025 at 05:15:38PM +0100, Josua Mayer wrote:
> Add mux controller support for when sdio lines are muxed between a host
> and multiple cards.
>
> There are several devices supporting a choice of eMMC or SD on a single
> board by both dip switch and gpio, e.g. Renesas RZ/G2L SMARC SoM and
> SolidRun RZ/G2L SoM.
>
> In-tree dts for the Renesas boards currently rely on preprocessor macros
> to hog gpios and define the card.
>
> By adding mux-states property to sdio controller description, boards can
> correctly describe the mux that already exists in hardware - and drivers
> can coordinate between mux selection and probing for cards.
>
> Signed-off-by: Josua Mayer <josua@...id-run.com>
> ---
> Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> index c754ea71f51f7..55635c60ad73a 100644
> --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
> @@ -106,6 +106,11 @@ properties:
> iommus:
> maxItems: 1
>
> + mux-states:
> + description:
> + mux controller node to route the SDIO signals from SoC to cards.
> + maxItems: 1
> +
> power-domains:
> maxItems: 1
>
> @@ -262,9 +267,17 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
> + #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
> #include <dt-bindings/power/r8a7790-sysc.h>
>
> + mux: mux-controller {
> + compatible = "gpio-mux";
> + #mux-state-cells = <1>;
> + mux-gpios = <&pinctrl RZG2L_GPIO(22, 1) GPIO_ACTIVE_LOW>;
> + };
This node should be removed, the tooling will provide a fake phandle to
satisfy your mux-states property.
pw-bot: changes-requested
> +
> sdhi0: mmc@...00000 {
> compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
> reg = <0xee100000 0x328>;
> @@ -275,6 +288,7 @@ examples:
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 314>;
> + mux-states = <&mux 0>;
> };
>
> sdhi1: mmc@...20000 {
>
> --
> 2.51.0
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists