[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <176435759680.2396163.4980372483978246141.robh@kernel.org>
Date: Fri, 28 Nov 2025 13:19:56 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Lukas Timmermann <linux@...mermann.space>
Cc: lee@...nel.org, conor+dt@...nel.org, devicetree@...r.kernel.org,
krzk+dt@...nel.org, linux-kernel@...r.kernel.org, pavel@...nel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-leds@...r.kernel.org
Subject: Re: [PATCH v12 1/2] dt-bindings: leds: Add new as3668 support
On Fri, 28 Nov 2025 18:58:26 +0100, Lukas Timmermann wrote:
> The bindings are incomplete, as the GPIO/Audio Input pin
> is still undocumented. The hardware used for testing this patch series
> does not allow modification, so the mentioned pin has been omitted.
>
> Signed-off-by: Lukas Timmermann <linux@...mermann.space>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
> .../devicetree/bindings/leds/ams,as3668.yaml | 74 +++++++++++++++++++
> MAINTAINERS | 6 ++
> 2 files changed, 80 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/ams,as3668.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251128175827.649481-2-linux@timmermann.space
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists