linux-kernel - [PATCH 1/1] dt-bindings: switch: adg1712: add ADG1712 SPST switch binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251128144627.24910-2-antoniu.miclaus@analog.com>
Date: Fri, 28 Nov 2025 16:46:13 +0200
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Antoniu Miclaus
	<antoniu.miclaus@...log.com>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/1] dt-bindings: switch: adg1712: add ADG1712 SPST switch binding

Add devicetree bindings for the ADG1712 quad SPST switch.

The ADG1712 contains four independent single-pole, single-throw (SPST)
switches, each controlled by a dedicated GPIO pin. While the device
uses the existing gpio-mux driver infrastructure (as each switch can be
modeled as a simple 2-state mux), a dedicated binding document is needed
to provide clear documentation on how to properly represent the ADG1712
in devicetree, following the pattern of one mux-controller node per
independent switch.

The binding references the gpio-mux schema and demonstrates how each of
the four independent switches should be instantiated as separate
mux-controller nodes in the devicetree.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
---
 .../bindings/switch/adi,adg1712.yaml          | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/switch/adi,adg1712.yaml

diff --git a/Documentation/devicetree/bindings/switch/adi,adg1712.yaml b/Documentation/devicetree/bindings/switch/adi,adg1712.yaml
new file mode 100644
index 000000000000..7de9ec1b7447
--- /dev/null
+++ b/Documentation/devicetree/bindings/switch/adi,adg1712.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/switch/adi,adg1712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADG1712 quad SPST switch
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@...log.com>
+
+description: |
+  The ADG1712 contains four independent single-pole, single-throw (SPST)
+  switches controlled by GPIO pins. The device operates with a low-voltage
+  single supply range from +1.08V to +5.5V or a low-voltage dual supply
+  range from ±1.08V to ±2.75V.
+
+  Datasheet: https://www.analog.com/en/products/adg1712.html
+
+select: false
+
+allOf:
+  - $ref: /schemas/mux/gpio-mux.yaml#
+
+properties:
+  compatible:
+    const: gpio-mux
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* ADG1712 with four independent switches, each as a 2-state mux */
+    adg1712_sw1: mux-controller-0 {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+        mux-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+        idle-state = <0>;  /* Switch open */
+    };
+
+    adg1712_sw2: mux-controller-1 {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+        mux-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+        idle-state = <0>;  /* Switch open */
+    };
+
+    adg1712_sw3: mux-controller-2 {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+        mux-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+        idle-state = <1>;  /* Switch closed */
+    };
+
+    adg1712_sw4: mux-controller-3 {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+        mux-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+        idle-state = <0>;  /* Switch open */
+    };
+...
-- 
2.43.0