linux-kernel - Re: [PATCH 1/1] dt-bindings: switch: adg1712: add ADG1712 SPST switch binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <176434676315.2173764.11206021200019707175.robh@kernel.org>
Date: Fri, 28 Nov 2025 10:19:24 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Antoniu Miclaus <antoniu.miclaus@...log.com>
Cc: Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>
Subject: Re: [PATCH 1/1] dt-bindings: switch: adg1712: add ADG1712 SPST
 switch binding


On Fri, 28 Nov 2025 16:46:13 +0200, Antoniu Miclaus wrote:
> Add devicetree bindings for the ADG1712 quad SPST switch.
> 
> The ADG1712 contains four independent single-pole, single-throw (SPST)
> switches, each controlled by a dedicated GPIO pin. While the device
> uses the existing gpio-mux driver infrastructure (as each switch can be
> modeled as a simple 2-state mux), a dedicated binding document is needed
> to provide clear documentation on how to properly represent the ADG1712
> in devicetree, following the pattern of one mux-controller node per
> independent switch.
> 
> The binding references the gpio-mux schema and demonstrates how each of
> the four independent switches should be instantiated as separate
> mux-controller nodes in the devicetree.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
> ---
>  .../bindings/switch/adi,adg1712.yaml          | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/switch/adi,adg1712.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...3000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@...5000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251128144627.24910-2-antoniu.miclaus@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.