linux-kernel - Re: [PATCH 4/4] dts: s32g: Add GPR syscon region

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aS3FWLWQ1g4YQjFi@lizhi-Precision-Tower-5810>
Date: Mon, 1 Dec 2025 11:42:00 -0500
From: Frank Li <Frank.li@....com>
To: Dan Carpenter <dan.carpenter@...aro.org>
Cc: Chester Lin <chester62515@...il.com>,
	Matthias Brugger <mbrugger@...e.com>,
	Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>,
	NXP S32 Linux Team <s32@....com>, Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>, Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linaro-s32@...aro.org
Subject: Re: [PATCH 4/4] dts: s32g: Add GPR syscon region

On Mon, Dec 01, 2025 at 04:08:33PM +0300, Dan Carpenter wrote:
> Add the GPR syscon region for the s32 chipset.
>
> Signed-off-by: Dan Carpenter <dan.carpenter@...aro.org>
> ---
>  arch/arm64/boot/dts/freescale/s32g2.dtsi | 8 ++++++++
>  arch/arm64/boot/dts/freescale/s32g3.dtsi | 8 ++++++++
>  2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> index 51d00dac12de..3c9472f6c174 100644
> --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> @@ -325,6 +325,13 @@ usdhc0-200mhz-grp4 {
>  			};
>  		};
>
> +		gpr: syscon@...7c000 {
> +			compatible = "nxp,s32-gpr", "syscon";
> +			reg = <0x4007c000 0x3000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +		};
> +

Please cc whole thread to imx@...ts.linux.dev.

I think it is not good method by using syscon here.

Suppose using standard phy interface or mux controller interface.

Frank

>  		ocotp: nvmem@...a4000 {
>  			compatible = "nxp,s32g2-ocotp";
>  			reg = <0x400a4000 0x400>;
> @@ -731,6 +738,7 @@ gmac0: ethernet@...3c000 {
>  			compatible = "nxp,s32g2-dwmac";
>  			reg = <0x4033c000 0x2000>, /* gmac IP */
>  			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
> +			phy-sel = <&gpr 0x4>;
>  			interrupt-parent = <&gic>;
>  			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "macirq";
> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> index eff7673e7f34..0ceca3caf133 100644
> --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> @@ -383,6 +383,13 @@ usdhc0-200mhz-grp4 {
>  			};
>  		};
>
> +		gpr: syscon@...7c000 {
> +			compatible = "nxp,s32-gpr", "syscon";
> +			reg = <0x4007c000 0x3000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +		};
> +
>  		ocotp: nvmem@...a4000 {
>  			compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
>  			reg = <0x400a4000 0x400>;
> @@ -808,6 +815,7 @@ gmac0: ethernet@...3c000 {
>  			compatible = "nxp,s32g2-dwmac";
>  			reg = <0x4033c000 0x2000>, /* gmac IP */
>  			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
> +			phy-sel = <&gpr 0x4>;
>  			interrupt-parent = <&gic>;
>  			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "macirq";
> --
> 2.51.0
>