[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6a392466-3aa3-49df-b96c-de2d272fca18@solid-run.com>
Date: Mon, 1 Dec 2025 12:01:12 +0000
From: Josua Mayer <josua@...id-run.com>
To: Conor Dooley <conor@...nel.org>
CC: Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>, Magnus Damm
<magnus.damm@...il.com>, Wolfram Sang <wsa+renesas@...g-engineering.com>,
Mikhail Anikin <mikhail.anikin@...id-run.com>, Yazan Shhady
<yazan.shhady@...id-run.com>, Jon Nettleton <jon@...id-run.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH 1/2] dt-bindings: mmc: renesas,sdhi: Add mux-states
property
Am 28.11.25 um 19:49 schrieb Conor Dooley:
> On Fri, Nov 28, 2025 at 05:15:38PM +0100, Josua Mayer wrote:
>> Add mux controller support for when sdio lines are muxed between a host
>> and multiple cards.
>>
>> There are several devices supporting a choice of eMMC or SD on a single
>> board by both dip switch and gpio, e.g. Renesas RZ/G2L SMARC SoM and
>> SolidRun RZ/G2L SoM.
>>
>> In-tree dts for the Renesas boards currently rely on preprocessor macros
>> to hog gpios and define the card.
>>
>> By adding mux-states property to sdio controller description, boards can
>> correctly describe the mux that already exists in hardware - and drivers
>> can coordinate between mux selection and probing for cards.
>>
>> Signed-off-by: Josua Mayer <josua@...id-run.com>
>> ---
>> Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
>> index c754ea71f51f7..55635c60ad73a 100644
>> --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
>> +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
>> @@ -106,6 +106,11 @@ properties:
>> iommus:
>> maxItems: 1
>>
>> + mux-states:
>> + description:
>> + mux controller node to route the SDIO signals from SoC to cards.
>> + maxItems: 1
>> +
>> power-domains:
>> maxItems: 1
>>
>> @@ -262,9 +267,17 @@ unevaluatedProperties: false
>> examples:
>> - |
>> #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
>> + #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
>> #include <dt-bindings/power/r8a7790-sysc.h>
>>
>> + mux: mux-controller {
>> + compatible = "gpio-mux";
>> + #mux-state-cells = <1>;
>> + mux-gpios = <&pinctrl RZG2L_GPIO(22, 1) GPIO_ACTIVE_LOW>;
>> + };
> This node should be removed, the tooling will provide a fake phandle to
> satisfy your mux-states property.
Will drop, thanks!
>
> pw-bot: changes-requested
>
>> +
>> sdhi0: mmc@...00000 {
>> compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
>> reg = <0xee100000 0x328>;
>> @@ -275,6 +288,7 @@ examples:
>> max-frequency = <195000000>;
>> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
>> resets = <&cpg 314>;
>> + mux-states = <&mux 0>;
>> };
>>
>> sdhi1: mmc@...20000 {
>>
>> --
>> 2.51.0
>>
Powered by blists - more mailing lists