| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251217023938.445721-2-chou.cosmo@gmail.com>
Date: Wed, 17 Dec 2025 10:39:34 +0800
From: Cosmo Chou <chou.cosmo@...il.com>
To: robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
joel@....id.au,
andrew@...econstruct.com.au
Cc: devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org,
cosmo.chou@...ntatw.com,
Cosmo Chou <chou.cosmo@...il.com>
Subject: [PATCH v2 1/5] ARM: dts: aspeed: bletchley: Use generic node names
Use generic node names to fix dt-schema warnings:
- spi1_gpio: rename to generic "spi" node name
- LED nodes: rename to led-N and move names to label properties
- GPIO key nodes: add "-switch" suffix to node names
Signed-off-by: Cosmo Chou <chou.cosmo@...il.com>
---
.../aspeed/aspeed-bmc-facebook-bletchley.dts | 77 ++++++++++++-------
1 file changed, 49 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index abdb1562115a..9cb01381e482 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -34,7 +34,7 @@ iio-hwmon {
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
};
- spi1_gpio: spi1-gpio {
+ spi1_gpio: spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
@@ -54,7 +54,8 @@ tpm@0 {
front_gpio_leds {
compatible = "gpio-leds";
- sys_log_id {
+ led-0 {
+ label = "sys_log_id";
default-state = "off";
gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
};
@@ -62,42 +63,50 @@ sys_log_id {
fan_gpio_leds {
compatible = "gpio-leds";
- fan0_blue {
+ led-0 {
+ label = "fan0_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
};
- fan1_blue {
+ led-1 {
+ label = "fan1_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
};
- fan2_blue {
+ led-2 {
+ label = "fan2_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
};
- fan3_blue {
+ led-3 {
+ label = "fan3_blue";
retain-state-shutdown;
default-state = "on";
gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
};
- fan0_amber {
+ led-4 {
+ label = "fan0_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
};
- fan1_amber {
+ led-5 {
+ label = "fan1_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
};
- fan2_amber {
+ led-6 {
+ label = "fan2_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
};
- fan3_amber {
+ led-7 {
+ label = "fan3_amber";
retain-state-shutdown;
default-state = "off";
gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
@@ -106,12 +115,14 @@ fan3_amber {
sled1_gpio_leds {
compatible = "gpio-leds";
- sled1_amber {
+ led-0 {
+ label = "sled1_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
};
- sled1_blue {
+ led-1 {
+ label = "sled1_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
@@ -120,12 +131,14 @@ sled1_blue {
sled2_gpio_leds {
compatible = "gpio-leds";
- sled2_amber {
+ led-0 {
+ label = "sled2_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
};
- sled2_blue {
+ led-1 {
+ label = "sled2_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
@@ -134,12 +147,14 @@ sled2_blue {
sled3_gpio_leds {
compatible = "gpio-leds";
- sled3_amber {
+ led-0 {
+ label = "sled3_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
};
- sled3_blue {
+ led-1 {
+ label = "sled3_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
@@ -148,12 +163,14 @@ sled3_blue {
sled4_gpio_leds {
compatible = "gpio-leds";
- sled4_amber {
+ led-0 {
+ label = "sled4_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
};
- sled4_blue {
+ led-1 {
+ label = "sled4_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
@@ -162,12 +179,14 @@ sled4_blue {
sled5_gpio_leds {
compatible = "gpio-leds";
- sled5_amber {
+ led-0 {
+ label = "sled5_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
};
- sled5_blue {
+ led-1 {
+ label = "sled5_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
@@ -176,12 +195,14 @@ sled5_blue {
sled6_gpio_leds {
compatible = "gpio-leds";
- sled6_amber {
+ led-0 {
+ label = "sled6_amber";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
};
- sled6_blue {
+ led-1 {
+ label = "sled6_blue";
retain-state-shutdown;
default-state = "keep";
gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
@@ -191,32 +212,32 @@ sled6_blue {
gpio-keys {
compatible = "gpio-keys";
- presence-sled1 {
+ presence-sled1-switch {
label = "presence-sled1";
gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 2)>;
};
- presence-sled2 {
+ presence-sled2-switch {
label = "presence-sled2";
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 3)>;
};
- presence-sled3 {
+ presence-sled3-switch {
label = "presence-sled3";
gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 4)>;
};
- presence-sled4 {
+ presence-sled4-switch {
label = "presence-sled4";
gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 5)>;
};
- presence-sled5 {
+ presence-sled5-switch {
label = "presence-sled5";
gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 6)>;
};
- presence-sled6 {
+ presence-sled6-switch {
label = "presence-sled6";
gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 7)>;
--
2.43.0
Powered by blists - more mailing lists